* [PATCH 2/7 v3] drm/pl111: Add all registers to debugfs
2017-09-07 12:49 [PATCH 1/7 v3] drm/pl111: Cleanup local header file Linus Walleij
@ 2017-09-07 12:49 ` Linus Walleij
2017-09-07 12:49 ` [PATCH 3/7 v3] drm/pl111: Replace custom connector with panel bridge Linus Walleij
` (4 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Linus Walleij @ 2017-09-07 12:49 UTC (permalink / raw)
To: linux-arm-kernel
This adds all the main control registers to the debugfs
register file. This was helpful for my debugging so it will
likely help others as well.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Rebase on DRM-TIP
ChangeLog v1->v2:
- Collect Eric's ACK.
---
drivers/gpu/drm/pl111/pl111_debugfs.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/pl111/pl111_debugfs.c b/drivers/gpu/drm/pl111/pl111_debugfs.c
index 0d9dee199b2c..7ddc7e3b9e7d 100644
--- a/drivers/gpu/drm/pl111/pl111_debugfs.c
+++ b/drivers/gpu/drm/pl111/pl111_debugfs.c
@@ -22,8 +22,14 @@ static const struct {
REGDEF(CLCD_TIM2),
REGDEF(CLCD_TIM3),
REGDEF(CLCD_UBAS),
+ REGDEF(CLCD_LBAS),
REGDEF(CLCD_PL111_CNTL),
REGDEF(CLCD_PL111_IENB),
+ REGDEF(CLCD_PL111_RIS),
+ REGDEF(CLCD_PL111_MIS),
+ REGDEF(CLCD_PL111_ICR),
+ REGDEF(CLCD_PL111_UCUR),
+ REGDEF(CLCD_PL111_LCUR),
};
int pl111_debugfs_regs(struct seq_file *m, void *unused)
--
2.13.5
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 3/7 v3] drm/pl111: Replace custom connector with panel bridge
2017-09-07 12:49 [PATCH 1/7 v3] drm/pl111: Cleanup local header file Linus Walleij
2017-09-07 12:49 ` [PATCH 2/7 v3] drm/pl111: Add all registers to debugfs Linus Walleij
@ 2017-09-07 12:49 ` Linus Walleij
2017-09-07 17:09 ` Eric Anholt
2017-09-07 12:49 ` [PATCH 4/7 v3] drm/pl111: Enable PL110 variant Linus Walleij
` (3 subsequent siblings)
5 siblings, 1 reply; 8+ messages in thread
From: Linus Walleij @ 2017-09-07 12:49 UTC (permalink / raw)
To: linux-arm-kernel
This replaces the custom connector in the PL111 with the
panel bridge helper.
This works nicely for all standard panels, but since there
are several PL11x-based systems that will need to use the dumb
VGA connector bridge we use drm_of_find_panel_or_bridge()
and make some headroom for dealing with bridges that are
not panels as well, and drop a TODO in the code.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Rebase on DRM-TIP
- Use drm_simple_display_pipe_attach_bridge() as suggested
by Daniel Vetter.
ChangeLog v1->v2:
- Remove the panel [un]prepare() and [en|dis]able() calls
from the display driver, since this is now handled
by the bridge.
---
drivers/gpu/drm/pl111/Kconfig | 3 +-
drivers/gpu/drm/pl111/Makefile | 3 +-
drivers/gpu/drm/pl111/pl111_connector.c | 126 --------------------------------
drivers/gpu/drm/pl111/pl111_display.c | 18 ++---
drivers/gpu/drm/pl111/pl111_drm.h | 17 ++---
drivers/gpu/drm/pl111/pl111_drv.c | 52 ++++++++-----
6 files changed, 52 insertions(+), 167 deletions(-)
delete mode 100644 drivers/gpu/drm/pl111/pl111_connector.c
diff --git a/drivers/gpu/drm/pl111/Kconfig b/drivers/gpu/drm/pl111/Kconfig
index bbfba87cd1a8..e5e2abd66491 100644
--- a/drivers/gpu/drm/pl111/Kconfig
+++ b/drivers/gpu/drm/pl111/Kconfig
@@ -6,7 +6,8 @@ config DRM_PL111
select DRM_KMS_HELPER
select DRM_KMS_CMA_HELPER
select DRM_GEM_CMA_HELPER
- select DRM_PANEL
+ select DRM_BRIDGE
+ select DRM_PANEL_BRIDGE
select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
help
Choose this option for DRM support for the PL111 CLCD controller.
diff --git a/drivers/gpu/drm/pl111/Makefile b/drivers/gpu/drm/pl111/Makefile
index 59483d610ef5..c5f8f9684848 100644
--- a/drivers/gpu/drm/pl111/Makefile
+++ b/drivers/gpu/drm/pl111/Makefile
@@ -1,5 +1,4 @@
-pl111_drm-y += pl111_connector.o \
- pl111_display.o \
+pl111_drm-y += pl111_display.o \
pl111_drv.o
pl111_drm-$(CONFIG_DEBUG_FS) += pl111_debugfs.o
diff --git a/drivers/gpu/drm/pl111/pl111_connector.c b/drivers/gpu/drm/pl111/pl111_connector.c
deleted file mode 100644
index d335f9a29ce4..000000000000
--- a/drivers/gpu/drm/pl111/pl111_connector.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved.
- *
- * Parts of this file were based on sources as follows:
- *
- * Copyright (c) 2006-2008 Intel Corporation
- * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
- * Copyright (C) 2011 Texas Instruments
- *
- * This program is free software and is provided to you under the terms of the
- * GNU General Public License version 2 as published by the Free Software
- * Foundation, and any use by you of this program is subject to the terms of
- * such GNU licence.
- *
- */
-
-/**
- * pl111_drm_connector.c
- * Implementation of the connector functions for PL111 DRM
- */
-#include <linux/amba/clcd-regs.h>
-#include <linux/version.h>
-#include <linux/shmem_fs.h>
-#include <linux/dma-buf.h>
-
-#include <drm/drmP.h>
-#include <drm/drm_atomic_helper.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_of.h>
-#include <drm/drm_panel.h>
-
-#include "pl111_drm.h"
-
-static void pl111_connector_destroy(struct drm_connector *connector)
-{
- struct pl111_drm_connector *pl111_connector =
- to_pl111_connector(connector);
-
- if (pl111_connector->panel)
- drm_panel_detach(pl111_connector->panel);
-
- drm_connector_unregister(connector);
- drm_connector_cleanup(connector);
-}
-
-static enum drm_connector_status pl111_connector_detect(struct drm_connector
- *connector, bool force)
-{
- struct pl111_drm_connector *pl111_connector =
- to_pl111_connector(connector);
-
- return (pl111_connector->panel ?
- connector_status_connected :
- connector_status_disconnected);
-}
-
-static int pl111_connector_helper_get_modes(struct drm_connector *connector)
-{
- struct pl111_drm_connector *pl111_connector =
- to_pl111_connector(connector);
-
- if (!pl111_connector->panel)
- return 0;
-
- return drm_panel_get_modes(pl111_connector->panel);
-}
-
-const struct drm_connector_funcs connector_funcs = {
- .fill_modes = drm_helper_probe_single_connector_modes,
- .destroy = pl111_connector_destroy,
- .detect = pl111_connector_detect,
- .reset = drm_atomic_helper_connector_reset,
- .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
- .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
-const struct drm_connector_helper_funcs connector_helper_funcs = {
- .get_modes = pl111_connector_helper_get_modes,
-};
-
-/* Walks the OF graph to find the panel node and then asks DRM to look
- * up the panel.
- */
-static struct drm_panel *pl111_get_panel(struct device *dev)
-{
- struct device_node *endpoint, *panel_node;
- struct device_node *np = dev->of_node;
- struct drm_panel *panel;
-
- endpoint = of_graph_get_next_endpoint(np, NULL);
- if (!endpoint) {
- dev_err(dev, "no endpoint to fetch panel\n");
- return NULL;
- }
-
- /* don't proceed if we have an endpoint but no panel_node tied to it */
- panel_node = of_graph_get_remote_port_parent(endpoint);
- of_node_put(endpoint);
- if (!panel_node) {
- dev_err(dev, "no valid panel node\n");
- return NULL;
- }
-
- panel = of_drm_find_panel(panel_node);
- of_node_put(panel_node);
-
- return panel;
-}
-
-int pl111_connector_init(struct drm_device *dev)
-{
- struct pl111_drm_dev_private *priv = dev->dev_private;
- struct pl111_drm_connector *pl111_connector = &priv->connector;
- struct drm_connector *connector = &pl111_connector->connector;
-
- drm_connector_init(dev, connector, &connector_funcs,
- DRM_MODE_CONNECTOR_DPI);
- drm_connector_helper_add(connector, &connector_helper_funcs);
-
- pl111_connector->panel = pl111_get_panel(dev->dev);
- if (pl111_connector->panel)
- drm_panel_attach(pl111_connector->panel, connector);
-
- return 0;
-}
-
diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
index b58c988d9da0..e4c692230548 100644
--- a/drivers/gpu/drm/pl111/pl111_display.c
+++ b/drivers/gpu/drm/pl111/pl111_display.c
@@ -21,7 +21,6 @@
#include <linux/of_graph.h>
#include <drm/drmP.h>
-#include <drm/drm_panel.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_fb_cma_helper.h>
@@ -94,7 +93,7 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
struct pl111_drm_dev_private *priv = drm->dev_private;
const struct drm_display_mode *mode = &cstate->mode;
struct drm_framebuffer *fb = plane->state->fb;
- struct drm_connector *connector = &priv->connector.connector;
+ struct drm_connector *connector = priv->connector;
u32 cntl;
u32 ppl, hsw, hfp, hbp;
u32 lpp, vsw, vfp, vbp;
@@ -156,8 +155,6 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
writel(0, priv->regs + CLCD_TIM3);
- drm_panel_prepare(priv->connector.panel);
-
/* Enable and Power Up */
cntl = CNTL_LCDEN | CNTL_LCDTFT | CNTL_LCDPWR | CNTL_LCDVCOMP(1);
@@ -204,8 +201,6 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
writel(cntl, priv->regs + CLCD_PL111_CNTL);
- drm_panel_enable(priv->connector.panel);
-
drm_crtc_vblank_on(crtc);
}
@@ -217,13 +212,9 @@ void pl111_display_disable(struct drm_simple_display_pipe *pipe)
drm_crtc_vblank_off(crtc);
- drm_panel_disable(priv->connector.panel);
-
/* Disable and Power Down */
writel(0, priv->regs + CLCD_PL111_CNTL);
- drm_panel_unprepare(priv->connector.panel);
-
clk_disable_unprepare(priv->clk);
}
@@ -458,7 +449,12 @@ int pl111_display_init(struct drm_device *drm)
ret = drm_simple_display_pipe_init(drm, &priv->pipe,
&pl111_display_funcs,
formats, ARRAY_SIZE(formats),
- NULL, &priv->connector.connector);
+ NULL, priv->connector);
+ if (ret)
+ return ret;
+
+ ret = drm_simple_display_pipe_attach_bridge(&priv->pipe,
+ priv->bridge);
if (ret)
return ret;
diff --git a/drivers/gpu/drm/pl111/pl111_drm.h b/drivers/gpu/drm/pl111/pl111_drm.h
index a97f303f6833..000534d85b43 100644
--- a/drivers/gpu/drm/pl111/pl111_drm.h
+++ b/drivers/gpu/drm/pl111/pl111_drm.h
@@ -21,21 +21,22 @@
#include <drm/drm_gem.h>
#include <drm/drm_simple_kms_helper.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_encoder.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_bridge.h>
#include <linux/clk-provider.h>
#define CLCD_IRQ_NEXTBASE_UPDATE BIT(2)
struct drm_minor;
-struct pl111_drm_connector {
- struct drm_connector connector;
- struct drm_panel *panel;
-};
-
struct pl111_drm_dev_private {
struct drm_device *drm;
- struct pl111_drm_connector connector;
+ struct drm_connector *connector;
+ struct drm_panel *panel;
+ struct drm_bridge *bridge;
struct drm_simple_display_pipe pipe;
struct drm_fbdev_cma *fbdev;
@@ -50,14 +51,10 @@ struct pl111_drm_dev_private {
spinlock_t tim2_lock;
};
-#define to_pl111_connector(x) \
- container_of(x, struct pl111_drm_connector, connector)
-
int pl111_display_init(struct drm_device *dev);
int pl111_enable_vblank(struct drm_device *drm, unsigned int crtc);
void pl111_disable_vblank(struct drm_device *drm, unsigned int crtc);
irqreturn_t pl111_irq(int irq, void *data);
-int pl111_connector_init(struct drm_device *dev);
int pl111_debugfs_init(struct drm_minor *minor);
#endif /* _PL111_DRM_H_ */
diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c
index 581c452cede1..bddf24327910 100644
--- a/drivers/gpu/drm/pl111/pl111_drv.c
+++ b/drivers/gpu/drm/pl111/pl111_drv.c
@@ -68,6 +68,9 @@
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_panel.h>
#include "pl111_drm.h"
@@ -83,6 +86,8 @@ static int pl111_modeset_init(struct drm_device *dev)
{
struct drm_mode_config *mode_config;
struct pl111_drm_dev_private *priv = dev->dev_private;
+ struct drm_panel *panel;
+ struct drm_bridge *bridge;
int ret = 0;
drm_mode_config_init(dev);
@@ -93,34 +98,38 @@ static int pl111_modeset_init(struct drm_device *dev)
mode_config->min_height = 1;
mode_config->max_height = 768;
- ret = pl111_connector_init(dev);
- if (ret) {
- dev_err(dev->dev, "Failed to create pl111_drm_connector\n");
- goto out_config;
+ ret = drm_of_find_panel_or_bridge(dev->dev->of_node,
+ 0, 0, &panel, &bridge);
+ if (ret && ret != -ENODEV)
+ return ret;
+ if (panel) {
+ bridge = drm_panel_bridge_add(panel,
+ DRM_MODE_CONNECTOR_Unknown);
+ if (IS_ERR(bridge)) {
+ ret = PTR_ERR(bridge);
+ goto out_config;
+ }
+ /*
+ * TODO: when we are using a different bridge than a panel
+ * (such as a dumb VGA connector) we need to devise a different
+ * method to get the connector out of the bridge.
+ */
+ priv->panel = panel;
+ priv->connector = panel->connector;
}
- /* Don't actually attach if we didn't find a drm_panel
- * attached to us. This will allow a kernel to include both
- * the fbdev pl111 driver and this one, and choose between
- * them based on which subsystem has support for the panel.
- */
- if (!priv->connector.panel) {
- dev_info(dev->dev,
- "Disabling due to lack of DRM panel device.\n");
- ret = -ENODEV;
- goto out_config;
- }
+ priv->bridge = bridge;
ret = pl111_display_init(dev);
if (ret != 0) {
dev_err(dev->dev, "Failed to init display\n");
- goto out_config;
+ goto out_bridge;
}
ret = drm_vblank_init(dev, 1);
if (ret != 0) {
dev_err(dev->dev, "Failed to init vblank\n");
- goto out_config;
+ goto out_bridge;
}
drm_mode_config_reset(dev);
@@ -132,6 +141,11 @@ static int pl111_modeset_init(struct drm_device *dev)
goto finish;
+out_bridge:
+ if (panel)
+ drm_panel_bridge_remove(bridge);
+ else
+ drm_bridge_remove(bridge);
out_config:
drm_mode_config_cleanup(dev);
finish:
@@ -236,6 +250,10 @@ static int pl111_amba_remove(struct amba_device *amba_dev)
drm_dev_unregister(drm);
if (priv->fbdev)
drm_fbdev_cma_fini(priv->fbdev);
+ if (priv->panel)
+ drm_panel_bridge_remove(priv->bridge);
+ else
+ drm_bridge_remove(priv->bridge);
drm_mode_config_cleanup(drm);
drm_dev_unref(drm);
--
2.13.5
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 3/7 v3] drm/pl111: Replace custom connector with panel bridge
2017-09-07 12:49 ` [PATCH 3/7 v3] drm/pl111: Replace custom connector with panel bridge Linus Walleij
@ 2017-09-07 17:09 ` Eric Anholt
0 siblings, 0 replies; 8+ messages in thread
From: Eric Anholt @ 2017-09-07 17:09 UTC (permalink / raw)
To: linux-arm-kernel
Linus Walleij <linus.walleij@linaro.org> writes:
> This replaces the custom connector in the PL111 with the
> panel bridge helper.
>
> This works nicely for all standard panels, but since there
> are several PL11x-based systems that will need to use the dumb
> VGA connector bridge we use drm_of_find_panel_or_bridge()
> and make some headroom for dealing with bridges that are
> not panels as well, and drop a TODO in the code.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> +out_bridge:
> + if (panel)
> + drm_panel_bridge_remove(bridge);
> + else
> + drm_bridge_remove(bridge);
Drop the "else drm_bridge_remove(bridge)" here and in the hunk below --
that unregisters the bridge driver entirely, rather than unreferencing
it from your driver (there's no refcounting to be done).
With that change,
Reviewed-by: Eric Anholt <eric@anholt.net>
> out_config:
> drm_mode_config_cleanup(dev);
> finish:
> @@ -236,6 +250,10 @@ static int pl111_amba_remove(struct amba_device *amba_dev)
> drm_dev_unregister(drm);
> if (priv->fbdev)
> drm_fbdev_cma_fini(priv->fbdev);
> + if (priv->panel)
> + drm_panel_bridge_remove(priv->bridge);
> + else
> + drm_bridge_remove(priv->bridge);
> drm_mode_config_cleanup(drm);
> drm_dev_unref(drm);
>
> --
> 2.13.5
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170907/8755707f/attachment.sig>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 4/7 v3] drm/pl111: Enable PL110 variant
2017-09-07 12:49 [PATCH 1/7 v3] drm/pl111: Cleanup local header file Linus Walleij
2017-09-07 12:49 ` [PATCH 2/7 v3] drm/pl111: Add all registers to debugfs Linus Walleij
2017-09-07 12:49 ` [PATCH 3/7 v3] drm/pl111: Replace custom connector with panel bridge Linus Walleij
@ 2017-09-07 12:49 ` Linus Walleij
2017-09-07 12:49 ` [PATCH 5/7 v3] drm/pl111: Insert delay before powering up PL11x Linus Walleij
` (2 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Linus Walleij @ 2017-09-07 12:49 UTC (permalink / raw)
To: linux-arm-kernel
We detect and enable the use of the PL110 variant, an earlier
incarnation of PL111. The only real difference is that the
control and interrupt enable registers have swapped place.
The Versatile AB and Versatile PB have a variant inbetween
PL110 and PL111, it is PL110 but they have already swapped the
two registers so those two need a bit of special handling.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Rebase on DRM-TIP
ChangeLog v1->v2:
- Fix static const on the variant struct holders. (Had to
insert a (void*) cast for this because amba_id is not
consting this field)
- Collect Eric A's Reviewed-by
---
drivers/gpu/drm/pl111/pl111_display.c | 30 ++++--------
drivers/gpu/drm/pl111/pl111_drm.h | 17 +++++++
drivers/gpu/drm/pl111/pl111_drv.c | 86 +++++++++++++++++++++++++++++++++--
3 files changed, 108 insertions(+), 25 deletions(-)
diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
index e4c692230548..b104011cea55 100644
--- a/drivers/gpu/drm/pl111/pl111_display.c
+++ b/drivers/gpu/drm/pl111/pl111_display.c
@@ -199,7 +199,7 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
break;
}
- writel(cntl, priv->regs + CLCD_PL111_CNTL);
+ writel(cntl, priv->regs + priv->ctrl);
drm_crtc_vblank_on(crtc);
}
@@ -213,7 +213,7 @@ void pl111_display_disable(struct drm_simple_display_pipe *pipe)
drm_crtc_vblank_off(crtc);
/* Disable and Power Down */
- writel(0, priv->regs + CLCD_PL111_CNTL);
+ writel(0, priv->regs + priv->ctrl);
clk_disable_unprepare(priv->clk);
}
@@ -251,7 +251,7 @@ int pl111_enable_vblank(struct drm_device *drm, unsigned int crtc)
{
struct pl111_drm_dev_private *priv = drm->dev_private;
- writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + CLCD_PL111_IENB);
+ writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + priv->ienb);
return 0;
}
@@ -260,7 +260,7 @@ void pl111_disable_vblank(struct drm_device *drm, unsigned int crtc)
{
struct pl111_drm_dev_private *priv = drm->dev_private;
- writel(0, priv->regs + CLCD_PL111_IENB);
+ writel(0, priv->regs + priv->ienb);
}
static int pl111_display_prepare_fb(struct drm_simple_display_pipe *pipe,
@@ -404,22 +404,6 @@ int pl111_display_init(struct drm_device *drm)
struct device_node *endpoint;
u32 tft_r0b0g0[3];
int ret;
- static const u32 formats[] = {
- DRM_FORMAT_ABGR8888,
- DRM_FORMAT_XBGR8888,
- DRM_FORMAT_ARGB8888,
- DRM_FORMAT_XRGB8888,
- DRM_FORMAT_BGR565,
- DRM_FORMAT_RGB565,
- DRM_FORMAT_ABGR1555,
- DRM_FORMAT_XBGR1555,
- DRM_FORMAT_ARGB1555,
- DRM_FORMAT_XRGB1555,
- DRM_FORMAT_ABGR4444,
- DRM_FORMAT_XBGR4444,
- DRM_FORMAT_ARGB4444,
- DRM_FORMAT_XRGB4444,
- };
endpoint = of_graph_get_next_endpoint(dev->of_node, NULL);
if (!endpoint)
@@ -448,8 +432,10 @@ int pl111_display_init(struct drm_device *drm)
ret = drm_simple_display_pipe_init(drm, &priv->pipe,
&pl111_display_funcs,
- formats, ARRAY_SIZE(formats),
- NULL, priv->connector);
+ priv->variant->formats,
+ priv->variant->nformats,
+ NULL,
+ priv->connector);
if (ret)
return ret;
diff --git a/drivers/gpu/drm/pl111/pl111_drm.h b/drivers/gpu/drm/pl111/pl111_drm.h
index 000534d85b43..b380a7b4fb58 100644
--- a/drivers/gpu/drm/pl111/pl111_drm.h
+++ b/drivers/gpu/drm/pl111/pl111_drm.h
@@ -31,6 +31,20 @@
struct drm_minor;
+/**
+ * struct pl111_variant_data - encodes IP differences
+ * @name: the name of this variant
+ * @is_pl110: this is the early PL110 variant
+ * @formats: array of supported pixel formats on this variant
+ * @nformats: the length of the array of supported pixel formats
+ */
+struct pl111_variant_data {
+ const char *name;
+ bool is_pl110;
+ const u32 *formats;
+ unsigned int nformats;
+};
+
struct pl111_drm_dev_private {
struct drm_device *drm;
@@ -41,6 +55,8 @@ struct pl111_drm_dev_private {
struct drm_fbdev_cma *fbdev;
void *regs;
+ u32 ienb;
+ u32 ctrl;
/* The pixel clock (a reference to our clock divider off of CLCDCLK). */
struct clk *clk;
/* pl111's internal clock divider. */
@@ -49,6 +65,7 @@ struct pl111_drm_dev_private {
* subsystem and pl111_display_enable().
*/
spinlock_t tim2_lock;
+ const struct pl111_variant_data *variant;
};
int pl111_display_init(struct drm_device *dev);
diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c
index bddf24327910..903e948afea1 100644
--- a/drivers/gpu/drm/pl111/pl111_drv.c
+++ b/drivers/gpu/drm/pl111/pl111_drv.c
@@ -197,6 +197,7 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
{
struct device *dev = &amba_dev->dev;
struct pl111_drm_dev_private *priv;
+ struct pl111_variant_data *variant = id->data;
struct drm_device *drm;
int ret;
@@ -210,6 +211,33 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
amba_set_drvdata(amba_dev, drm);
priv->drm = drm;
drm->dev_private = priv;
+ priv->variant = variant;
+
+ /*
+ * The PL110 and PL111 variants have two registers
+ * swapped: interrupt enable and control. For this reason
+ * we use offsets that we can change per variant.
+ */
+ if (variant->is_pl110) {
+ /*
+ * The ARM Versatile boards are even more special:
+ * their PrimeCell ID say they are PL110 but the
+ * control and interrupt enable registers are anyway
+ * swapped to the PL111 order so they are not following
+ * the PL110 datasheet.
+ */
+ if (of_machine_is_compatible("arm,versatile-ab") ||
+ of_machine_is_compatible("arm,versatile-pb")) {
+ priv->ienb = CLCD_PL111_IENB;
+ priv->ctrl = CLCD_PL111_CNTL;
+ } else {
+ priv->ienb = CLCD_PL110_IENB;
+ priv->ctrl = CLCD_PL110_CNTL;
+ }
+ } else {
+ priv->ienb = CLCD_PL111_IENB;
+ priv->ctrl = CLCD_PL111_CNTL;
+ }
priv->regs = devm_ioremap_resource(dev, &amba_dev->res);
if (IS_ERR(priv->regs)) {
@@ -218,10 +246,10 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
}
/* turn off interrupts before requesting the irq */
- writel(0, priv->regs + CLCD_PL111_IENB);
+ writel(0, priv->regs + priv->ienb);
ret = devm_request_irq(dev, amba_dev->irq[0], pl111_irq, 0,
- "pl111", priv);
+ variant->name, priv);
if (ret != 0) {
dev_err(dev, "%s failed irq %d\n", __func__, ret);
return ret;
@@ -260,10 +288,62 @@ static int pl111_amba_remove(struct amba_device *amba_dev)
return 0;
}
-static struct amba_id pl111_id_table[] = {
+/*
+ * This variant exist in early versions like the ARM Integrator
+ * and this version lacks the 565 and 444 pixel formats.
+ */
+static const u32 pl110_pixel_formats[] = {
+ DRM_FORMAT_ABGR8888,
+ DRM_FORMAT_XBGR8888,
+ DRM_FORMAT_ARGB8888,
+ DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_ABGR1555,
+ DRM_FORMAT_XBGR1555,
+ DRM_FORMAT_ARGB1555,
+ DRM_FORMAT_XRGB1555,
+};
+
+static const struct pl111_variant_data pl110_variant = {
+ .name = "PL110",
+ .is_pl110 = true,
+ .formats = pl110_pixel_formats,
+ .nformats = ARRAY_SIZE(pl110_pixel_formats),
+};
+
+/* RealView, Versatile Express etc use this modern variant */
+static const u32 pl111_pixel_formats[] = {
+ DRM_FORMAT_ABGR8888,
+ DRM_FORMAT_XBGR8888,
+ DRM_FORMAT_ARGB8888,
+ DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_BGR565,
+ DRM_FORMAT_RGB565,
+ DRM_FORMAT_ABGR1555,
+ DRM_FORMAT_XBGR1555,
+ DRM_FORMAT_ARGB1555,
+ DRM_FORMAT_XRGB1555,
+ DRM_FORMAT_ABGR4444,
+ DRM_FORMAT_XBGR4444,
+ DRM_FORMAT_ARGB4444,
+ DRM_FORMAT_XRGB4444,
+};
+
+static const struct pl111_variant_data pl111_variant = {
+ .name = "PL111",
+ .formats = pl111_pixel_formats,
+ .nformats = ARRAY_SIZE(pl111_pixel_formats),
+};
+
+static const struct amba_id pl111_id_table[] = {
+ {
+ .id = 0x00041110,
+ .mask = 0x000fffff,
+ .data = (void*)&pl110_variant,
+ },
{
.id = 0x00041111,
.mask = 0x000fffff,
+ .data = (void*)&pl111_variant,
},
{0, 0},
};
--
2.13.5
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 5/7 v3] drm/pl111: Insert delay before powering up PL11x
2017-09-07 12:49 [PATCH 1/7 v3] drm/pl111: Cleanup local header file Linus Walleij
` (2 preceding siblings ...)
2017-09-07 12:49 ` [PATCH 4/7 v3] drm/pl111: Enable PL110 variant Linus Walleij
@ 2017-09-07 12:49 ` Linus Walleij
2017-09-07 12:49 ` [PATCH 6/7 v3] drm/pl111: Add optional variant display en/disable callbacks Linus Walleij
2017-09-07 12:49 ` [PATCH 7/7 v3] drm/pl111: Add handling of Versatile platforms Linus Walleij
5 siblings, 0 replies; 8+ messages in thread
From: Linus Walleij @ 2017-09-07 12:49 UTC (permalink / raw)
To: linux-arm-kernel
The old codebase has a delay between enabling and powering up the
PL11x.
According to the manual for PL110, ARM DDI 0161E page 1-5 and
the PL111 manual ARM DDI 0293C page 1-6, the power sequence should
be such that once Vdd is stable (which we assume it is at boot)
LCDEN is enabled first and then CLPOWER should be enabled
"after the signals have stabilized" and this is said to
be display-dependent. The old codebase uses 20ms.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Rebase on DRM-TIP
ChangeLog v1->v2:
- Fall back to the delay of 20 ms from the old framebuffer
driver to stabilize Vee in shortage of other alternatives.
---
drivers/gpu/drm/pl111/pl111_display.c | 31 ++++++++++++++++++++++++++++---
1 file changed, 28 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
index b104011cea55..b7df9f5df881 100644
--- a/drivers/gpu/drm/pl111/pl111_display.c
+++ b/drivers/gpu/drm/pl111/pl111_display.c
@@ -155,8 +155,8 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
writel(0, priv->regs + CLCD_TIM3);
- /* Enable and Power Up */
- cntl = CNTL_LCDEN | CNTL_LCDTFT | CNTL_LCDPWR | CNTL_LCDVCOMP(1);
+ /* Hard-code TFT panel */
+ cntl = CNTL_LCDEN | CNTL_LCDTFT | CNTL_LCDVCOMP(1);
/* Note that the the hardware's format reader takes 'r' from
* the low bit, while DRM formats list channels from high bit
@@ -199,6 +199,17 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
break;
}
+ /* Power sequence: first enable and chill */
+ writel(cntl, priv->regs + priv->ctrl);
+
+ /*
+ * We expect this delay to stabilize the contrast
+ * voltage Vee as stipulated by the manual
+ */
+ msleep(20);
+
+ /* Power Up */
+ cntl |= CNTL_LCDPWR;
writel(cntl, priv->regs + priv->ctrl);
drm_crtc_vblank_on(crtc);
@@ -209,10 +220,24 @@ void pl111_display_disable(struct drm_simple_display_pipe *pipe)
struct drm_crtc *crtc = &pipe->crtc;
struct drm_device *drm = crtc->dev;
struct pl111_drm_dev_private *priv = drm->dev_private;
+ u32 cntl;
drm_crtc_vblank_off(crtc);
- /* Disable and Power Down */
+ /* Power Down */
+ cntl = readl(priv->regs + priv->ctrl);
+ if (cntl & CNTL_LCDPWR) {
+ cntl &= ~CNTL_LCDPWR;
+ writel(cntl, priv->regs + priv->ctrl);
+ }
+
+ /*
+ * We expect this delay to stabilize the contrast voltage Vee as
+ * stipulated by the manual
+ */
+ msleep(20);
+
+ /* Disable */
writel(0, priv->regs + priv->ctrl);
clk_disable_unprepare(priv->clk);
--
2.13.5
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 6/7 v3] drm/pl111: Add optional variant display en/disable callbacks
2017-09-07 12:49 [PATCH 1/7 v3] drm/pl111: Cleanup local header file Linus Walleij
` (3 preceding siblings ...)
2017-09-07 12:49 ` [PATCH 5/7 v3] drm/pl111: Insert delay before powering up PL11x Linus Walleij
@ 2017-09-07 12:49 ` Linus Walleij
2017-09-07 12:49 ` [PATCH 7/7 v3] drm/pl111: Add handling of Versatile platforms Linus Walleij
5 siblings, 0 replies; 8+ messages in thread
From: Linus Walleij @ 2017-09-07 12:49 UTC (permalink / raw)
To: linux-arm-kernel
The silcon and components around the PL111 may require some
variants to perform special set-up of the display. Add two
callbacks to manage this.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Rebase on DRM-TIP
ChangeLog v1->v2:
- Rebase on other display driver changes.
---
drivers/gpu/drm/pl111/pl111_display.c | 6 ++++++
drivers/gpu/drm/pl111/pl111_drm.h | 3 +++
2 files changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
index b7df9f5df881..68847a074331 100644
--- a/drivers/gpu/drm/pl111/pl111_display.c
+++ b/drivers/gpu/drm/pl111/pl111_display.c
@@ -208,6 +208,9 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
*/
msleep(20);
+ if (priv->variant_display_enable)
+ priv->variant_display_enable(drm, fb->format->format);
+
/* Power Up */
cntl |= CNTL_LCDPWR;
writel(cntl, priv->regs + priv->ctrl);
@@ -237,6 +240,9 @@ void pl111_display_disable(struct drm_simple_display_pipe *pipe)
*/
msleep(20);
+ if (priv->variant_display_disable)
+ priv->variant_display_disable(drm);
+
/* Disable */
writel(0, priv->regs + priv->ctrl);
diff --git a/drivers/gpu/drm/pl111/pl111_drm.h b/drivers/gpu/drm/pl111/pl111_drm.h
index b380a7b4fb58..440f53ebee8c 100644
--- a/drivers/gpu/drm/pl111/pl111_drm.h
+++ b/drivers/gpu/drm/pl111/pl111_drm.h
@@ -26,6 +26,7 @@
#include <drm/drm_panel.h>
#include <drm/drm_bridge.h>
#include <linux/clk-provider.h>
+#include <linux/interrupt.h>
#define CLCD_IRQ_NEXTBASE_UPDATE BIT(2)
@@ -66,6 +67,8 @@ struct pl111_drm_dev_private {
*/
spinlock_t tim2_lock;
const struct pl111_variant_data *variant;
+ void (*variant_display_enable) (struct drm_device *drm, u32 format);
+ void (*variant_display_disable) (struct drm_device *drm);
};
int pl111_display_init(struct drm_device *dev);
--
2.13.5
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 7/7 v3] drm/pl111: Add handling of Versatile platforms
2017-09-07 12:49 [PATCH 1/7 v3] drm/pl111: Cleanup local header file Linus Walleij
` (4 preceding siblings ...)
2017-09-07 12:49 ` [PATCH 6/7 v3] drm/pl111: Add optional variant display en/disable callbacks Linus Walleij
@ 2017-09-07 12:49 ` Linus Walleij
5 siblings, 0 replies; 8+ messages in thread
From: Linus Walleij @ 2017-09-07 12:49 UTC (permalink / raw)
To: linux-arm-kernel
The ARM reference designs in the Versatile family: Integrator,
Versatile and RealView can make use of the new DRM driver as well.
We just need to create a bit of platform-specific code for them
that we isolate to its own file.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Rebase on DRM-TIP
ChangeLog v1->v2:
- Rebase on the other patches.
- Drop pad note from DOC section.
---
drivers/gpu/drm/pl111/Makefile | 1 +
drivers/gpu/drm/pl111/pl111_display.c | 7 -
drivers/gpu/drm/pl111/pl111_drv.c | 8 +-
drivers/gpu/drm/pl111/pl111_versatile.c | 270 ++++++++++++++++++++++++++++++++
drivers/gpu/drm/pl111/pl111_versatile.h | 9 ++
5 files changed, 285 insertions(+), 10 deletions(-)
create mode 100644 drivers/gpu/drm/pl111/pl111_versatile.c
create mode 100644 drivers/gpu/drm/pl111/pl111_versatile.h
diff --git a/drivers/gpu/drm/pl111/Makefile b/drivers/gpu/drm/pl111/Makefile
index c5f8f9684848..fce1453a93e1 100644
--- a/drivers/gpu/drm/pl111/Makefile
+++ b/drivers/gpu/drm/pl111/Makefile
@@ -1,4 +1,5 @@
pl111_drm-y += pl111_display.o \
+ pl111_versatile.o \
pl111_drv.o
pl111_drm-$(CONFIG_DEBUG_FS) += pl111_debugfs.o
diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
index 68847a074331..cdb042951de0 100644
--- a/drivers/gpu/drm/pl111/pl111_display.c
+++ b/drivers/gpu/drm/pl111/pl111_display.c
@@ -450,13 +450,6 @@ int pl111_display_init(struct drm_device *drm)
}
of_node_put(endpoint);
- if (tft_r0b0g0[0] != 0 ||
- tft_r0b0g0[1] != 8 ||
- tft_r0b0g0[2] != 16) {
- dev_err(dev, "arm,pl11x,tft-r0g0b0-pads != [0,8,16] not yet supported\n");
- return -EINVAL;
- }
-
ret = pl111_init_clock_divider(drm);
if (ret)
return ret;
diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c
index 903e948afea1..b7dcf155bd0f 100644
--- a/drivers/gpu/drm/pl111/pl111_drv.c
+++ b/drivers/gpu/drm/pl111/pl111_drv.c
@@ -41,9 +41,6 @@
* - Fix race between setting plane base address and getting IRQ for
* vsync firing the pageflip completion.
*
- * - Expose the correct set of formats we can support based on the
- * "arm,pl11x,tft-r0g0b0-pads" DT property.
- *
* - Use the "max-memory-bandwidth" DT property to filter the
* supported formats.
*
@@ -73,6 +70,7 @@
#include <drm/drm_panel.h>
#include "pl111_drm.h"
+#include "pl111_versatile.h"
#define DRIVER_DESC "DRM module for PL111"
@@ -255,6 +253,10 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
return ret;
}
+ ret = pl111_versatile_init(dev, priv);
+ if (ret)
+ goto dev_unref;
+
ret = pl111_modeset_init(drm);
if (ret != 0)
goto dev_unref;
diff --git a/drivers/gpu/drm/pl111/pl111_versatile.c b/drivers/gpu/drm/pl111/pl111_versatile.c
new file mode 100644
index 000000000000..97d4af6925a3
--- /dev/null
+++ b/drivers/gpu/drm/pl111/pl111_versatile.c
@@ -0,0 +1,270 @@
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <drm/drmP.h>
+#include "pl111_versatile.h"
+#include "pl111_drm.h"
+
+static struct regmap *versatile_syscon_map;
+
+/*
+ * We detect the different syscon types from the compatible strings.
+ */
+enum versatile_clcd {
+ INTEGRATOR_CLCD_CM,
+ VERSATILE_CLCD,
+ REALVIEW_CLCD_EB,
+ REALVIEW_CLCD_PB1176,
+ REALVIEW_CLCD_PB11MP,
+ REALVIEW_CLCD_PBA8,
+ REALVIEW_CLCD_PBX,
+};
+
+static const struct of_device_id versatile_clcd_of_match[] = {
+ {
+ .compatible = "arm,core-module-integrator",
+ .data = (void *)INTEGRATOR_CLCD_CM,
+ },
+ {
+ .compatible = "arm,versatile-sysreg",
+ .data = (void *)VERSATILE_CLCD,
+ },
+ {
+ .compatible = "arm,realview-eb-syscon",
+ .data = (void *)REALVIEW_CLCD_EB,
+ },
+ {
+ .compatible = "arm,realview-pb1176-syscon",
+ .data = (void *)REALVIEW_CLCD_PB1176,
+ },
+ {
+ .compatible = "arm,realview-pb11mp-syscon",
+ .data = (void *)REALVIEW_CLCD_PB11MP,
+ },
+ {
+ .compatible = "arm,realview-pba8-syscon",
+ .data = (void *)REALVIEW_CLCD_PBA8,
+ },
+ {
+ .compatible = "arm,realview-pbx-syscon",
+ .data = (void *)REALVIEW_CLCD_PBX,
+ },
+ {},
+};
+
+/*
+ * Core module CLCD control on the Integrator/CP, bits
+ * 8 thru 19 of the CM_CONTROL register controls a bunch
+ * of CLCD settings.
+ */
+#define INTEGRATOR_HDR_CTRL_OFFSET 0x0C
+#define INTEGRATOR_CLCD_LCDBIASEN BIT(8)
+#define INTEGRATOR_CLCD_LCDBIASUP BIT(9)
+#define INTEGRATOR_CLCD_LCDBIASDN BIT(10)
+/* Bits 11,12,13 controls the LCD type */
+#define INTEGRATOR_CLCD_LCDMUX_MASK (BIT(11)|BIT(12)|BIT(13))
+#define INTEGRATOR_CLCD_LCDMUX_LCD24 BIT(11)
+#define INTEGRATOR_CLCD_LCDMUX_VGA565 BIT(12)
+#define INTEGRATOR_CLCD_LCDMUX_SHARP (BIT(11)|BIT(12))
+#define INTEGRATOR_CLCD_LCDMUX_VGA555 BIT(13)
+#define INTEGRATOR_CLCD_LCDMUX_VGA24 (BIT(11)|BIT(12)|BIT(13))
+#define INTEGRATOR_CLCD_LCD0_EN BIT(14)
+#define INTEGRATOR_CLCD_LCD1_EN BIT(15)
+/* R/L flip on Sharp */
+#define INTEGRATOR_CLCD_LCD_STATIC1 BIT(16)
+/* U/D flip on Sharp */
+#define INTEGRATOR_CLCD_LCD_STATIC2 BIT(17)
+/* No connection on Sharp */
+#define INTEGRATOR_CLCD_LCD_STATIC BIT(18)
+/* 0 = 24bit VGA, 1 = 18bit VGA */
+#define INTEGRATOR_CLCD_LCD_N24BITEN BIT(19)
+
+#define INTEGRATOR_CLCD_MASK (INTEGRATOR_CLCD_LCDBIASEN | \
+ INTEGRATOR_CLCD_LCDBIASUP | \
+ INTEGRATOR_CLCD_LCDBIASDN | \
+ INTEGRATOR_CLCD_LCDMUX_MASK | \
+ INTEGRATOR_CLCD_LCD0_EN | \
+ INTEGRATOR_CLCD_LCD1_EN | \
+ INTEGRATOR_CLCD_LCD_STATIC1 | \
+ INTEGRATOR_CLCD_LCD_STATIC2 | \
+ INTEGRATOR_CLCD_LCD_STATIC | \
+ INTEGRATOR_CLCD_LCD_N24BITEN)
+
+static void pl111_integrator_enable(struct drm_device *drm, u32 format)
+{
+ u32 val;
+
+ dev_info(drm->dev, "enable Integrator CLCD connectors\n");
+
+ /* FIXME: really needed? */
+ val = INTEGRATOR_CLCD_LCD_STATIC1 | INTEGRATOR_CLCD_LCD_STATIC2 |
+ INTEGRATOR_CLCD_LCD0_EN | INTEGRATOR_CLCD_LCD1_EN;
+
+ switch (format) {
+ case DRM_FORMAT_XBGR8888:
+ case DRM_FORMAT_XRGB8888:
+ break;
+ case DRM_FORMAT_BGR565:
+ case DRM_FORMAT_RGB565:
+ /* truecolor RGB565 */
+ val |= INTEGRATOR_CLCD_LCDMUX_VGA565;
+ break;
+ case DRM_FORMAT_XBGR1555:
+ case DRM_FORMAT_XRGB1555:
+ /* Pseudocolor, RGB555, BGR555 */
+ val |= INTEGRATOR_CLCD_LCDMUX_VGA555;
+ break;
+ default:
+ dev_err(drm->dev, "unhandled format on Integrator 0x%08x\n",
+ format);
+ break;
+ }
+
+ regmap_update_bits(versatile_syscon_map,
+ INTEGRATOR_HDR_CTRL_OFFSET,
+ INTEGRATOR_CLCD_MASK,
+ val);
+}
+
+/*
+ * This configuration register in the Versatile and RealView
+ * family is uniformly present but appears more and more
+ * unutilized starting with the RealView series.
+ */
+#define SYS_CLCD 0x50
+#define SYS_CLCD_MODE_MASK (BIT(0)|BIT(1))
+#define SYS_CLCD_MODE_888 0
+#define SYS_CLCD_MODE_5551 BIT(0)
+#define SYS_CLCD_MODE_565_R_LSB BIT(1)
+#define SYS_CLCD_MODE_565_B_LSB (BIT(0)|BIT(1))
+#define SYS_CLCD_CONNECTOR_MASK (BIT(2)|BIT(3)|BIT(4)|BIT(5))
+#define SYS_CLCD_NLCDIOON BIT(2)
+#define SYS_CLCD_VDDPOSSWITCH BIT(3)
+#define SYS_CLCD_PWR3V5SWITCH BIT(4)
+#define SYS_CLCD_VDDNEGSWITCH BIT(5)
+
+static void pl111_versatile_disable(struct drm_device *drm)
+{
+ dev_info(drm->dev, "disable Versatile CLCD connectors\n");
+ regmap_update_bits(versatile_syscon_map,
+ SYS_CLCD,
+ SYS_CLCD_CONNECTOR_MASK,
+ 0);
+}
+
+static void pl111_versatile_enable(struct drm_device *drm, u32 format)
+{
+ u32 val = 0;
+
+ dev_info(drm->dev, "enable Versatile CLCD connectors\n");
+
+ switch (format) {
+ case DRM_FORMAT_ABGR8888:
+ case DRM_FORMAT_XBGR8888:
+ case DRM_FORMAT_ARGB8888:
+ case DRM_FORMAT_XRGB8888:
+ val |= SYS_CLCD_MODE_888;
+ break;
+ case DRM_FORMAT_BGR565:
+ val |= SYS_CLCD_MODE_565_R_LSB;
+ break;
+ case DRM_FORMAT_RGB565:
+ val |= SYS_CLCD_MODE_565_B_LSB;
+ break;
+ case DRM_FORMAT_ABGR1555:
+ case DRM_FORMAT_XBGR1555:
+ case DRM_FORMAT_ARGB1555:
+ case DRM_FORMAT_XRGB1555:
+ val |= SYS_CLCD_MODE_5551;
+ break;
+ default:
+ dev_err(drm->dev, "unhandled format on Versatile 0x%08x\n",
+ format);
+ break;
+ }
+
+ /* Set up the MUX */
+ regmap_update_bits(versatile_syscon_map,
+ SYS_CLCD,
+ SYS_CLCD_MODE_MASK,
+ val);
+
+ /* Then enable the display */
+ regmap_update_bits(versatile_syscon_map,
+ SYS_CLCD,
+ SYS_CLCD_CONNECTOR_MASK,
+ SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH);
+}
+
+static void pl111_realview_clcd_disable(struct drm_device *drm)
+{
+ dev_info(drm->dev, "disable RealView CLCD connectors\n");
+ regmap_update_bits(versatile_syscon_map,
+ SYS_CLCD,
+ SYS_CLCD_CONNECTOR_MASK,
+ 0);
+}
+
+static void pl111_realview_clcd_enable(struct drm_device *drm, u32 format)
+{
+ dev_info(drm->dev, "enable RealView CLCD connectors\n");
+ regmap_update_bits(versatile_syscon_map,
+ SYS_CLCD,
+ SYS_CLCD_CONNECTOR_MASK,
+ SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH);
+}
+
+int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)
+{
+ const struct of_device_id *clcd_id;
+ enum versatile_clcd versatile_clcd_type;
+ struct device_node *np;
+ struct regmap *map;
+
+ np = of_find_matching_node_and_match(NULL, versatile_clcd_of_match,
+ &clcd_id);
+ if (!np) {
+ /* Non-ARM reference designs, just bail out */
+ return 0;
+ }
+ versatile_clcd_type = (enum versatile_clcd)clcd_id->data;
+
+ map = syscon_node_to_regmap(np);
+ if (IS_ERR(map)) {
+ dev_err(dev, "no Versatile syscon regmap\n");
+ return PTR_ERR(map);
+ }
+
+ switch (versatile_clcd_type) {
+ case INTEGRATOR_CLCD_CM:
+ versatile_syscon_map = map;
+ priv->variant_display_enable = pl111_integrator_enable;
+ dev_info(dev, "set up callbacks for Integrator PL110\n");
+ break;
+ case VERSATILE_CLCD:
+ versatile_syscon_map = map;
+ priv->variant_display_enable = pl111_versatile_enable;
+ priv->variant_display_disable = pl111_versatile_disable;
+ dev_info(dev, "set up callbacks for Versatile PL110+\n");
+ break;
+ case REALVIEW_CLCD_EB:
+ case REALVIEW_CLCD_PB1176:
+ case REALVIEW_CLCD_PB11MP:
+ case REALVIEW_CLCD_PBA8:
+ case REALVIEW_CLCD_PBX:
+ versatile_syscon_map = map;
+ priv->variant_display_enable = pl111_realview_clcd_enable;
+ priv->variant_display_disable = pl111_realview_clcd_disable;
+ dev_info(dev, "set up callbacks for RealView PL111\n");
+ break;
+ default:
+ dev_info(dev, "unknown Versatile system controller\n");
+ break;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pl111_versatile_init);
diff --git a/drivers/gpu/drm/pl111/pl111_versatile.h b/drivers/gpu/drm/pl111/pl111_versatile.h
new file mode 100644
index 000000000000..41aa6d969dc6
--- /dev/null
+++ b/drivers/gpu/drm/pl111/pl111_versatile.h
@@ -0,0 +1,9 @@
+#include <linux/device.h>
+#include "pl111_drm.h"
+
+#ifndef PL111_VERSATILE_H
+#define PL111_VERSATILE_H
+
+int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv);
+
+#endif
--
2.13.5
^ permalink raw reply related [flat|nested] 8+ messages in thread