From: dongas86@gmail.com (Dong Aisheng)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 00/10] clk: add imx7ulp clk support
Date: Mon, 11 Sep 2017 15:25:39 +0800 [thread overview]
Message-ID: <20170911072539.GA19297@b29396-OptiPlex-7040> (raw)
In-Reply-To: <1499946435-7177-1-git-send-email-aisheng.dong@nxp.com>
Hi Stephen,
On Thu, Jul 13, 2017 at 07:47:05PM +0800, Dong Aisheng wrote:
> This patch series intends to add imx7ulp clk support.
>
> i.MX7ULP Clock functions are under joint control of the System
> Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
> modules, and Core Mode Controller (CMC)1 blocks
>
> The clocking scheme provides clear separation between M4 domain
> and A7 domain. Except for a few clock sources shared between two
> domains, such as the System Oscillator clock, the Slow IRC (SIRC),
> and and the Fast IRC clock (FIRCLK), clock sources and clock
> management are separated and contained within each domain.
>
> M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
> A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.
>
> Note: this series only adds A7 clock domain support as M4 clock
> domain will be handled by M4 seperately.
>
> Change Log:
> v1->v2:
> * add enable/disable for the type of CLK_DIVIDER_ZERO_GATE dividers
> * use clk_hw apis to register clocks
> * use of_clk_add_hw_provider
> * split the clocks register process into two parts: early part for possible
> timers clocks registered by CLK_OF_DECLARE_DRIVER and the later part for
> the left normal peripheral clocks registered by a platform driver.
Would you please help review this new series when you're free?
This has been pending for a long time.
Regards
Dong Aisheng
>
> Dong Aisheng (10):
> clk: clk-divider: add CLK_DIVIDER_ZERO_GATE clk support
> clk: reparent orphans after critical clocks enabled
> clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support
> clk: imx: add pllv4 support
> clk: imx: add pfdv2 support
> clk: imx: add composite clk support
> dt-bindings: clock: add imx7ulp clock binding doc
> clk: imx: make mux parent strings const
> clk: imx: implement new clk_hw based APIs
> clk: imx: add imx7ulp clk driver
>
> .../devicetree/bindings/clock/imx7ulp-clock.txt | 62 ++++++
> drivers/clk/clk-divider.c | 100 ++++++++-
> drivers/clk/clk-fractional-divider.c | 10 +
> drivers/clk/clk.c | 39 ++--
> drivers/clk/imx/Makefile | 6 +-
> drivers/clk/imx/clk-busy.c | 2 +-
> drivers/clk/imx/clk-composite.c | 90 ++++++++
> drivers/clk/imx/clk-fixup-mux.c | 2 +-
> drivers/clk/imx/clk-imx7ulp.c | 245 +++++++++++++++++++++
> drivers/clk/imx/clk-pfdv2.c | 207 +++++++++++++++++
> drivers/clk/imx/clk-pllv4.c | 188 ++++++++++++++++
> drivers/clk/imx/clk.c | 22 ++
> drivers/clk/imx/clk.h | 92 +++++++-
> include/dt-bindings/clock/imx7ulp-clock.h | 108 +++++++++
> include/linux/clk-provider.h | 17 ++
> 15 files changed, 1159 insertions(+), 31 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/imx7ulp-clock.txt
> create mode 100644 drivers/clk/imx/clk-composite.c
> create mode 100644 drivers/clk/imx/clk-imx7ulp.c
> create mode 100644 drivers/clk/imx/clk-pfdv2.c
> create mode 100644 drivers/clk/imx/clk-pllv4.c
> create mode 100644 include/dt-bindings/clock/imx7ulp-clock.h
>
> --
> 2.7.4
>
prev parent reply other threads:[~2017-09-11 7:25 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-13 11:47 [PATCH V2 00/10] clk: add imx7ulp clk support Dong Aisheng
2017-07-13 11:47 ` [PATCH V2 01/10] clk: clk-divider: add CLK_DIVIDER_ZERO_GATE " Dong Aisheng
2017-11-02 7:50 ` Stephen Boyd
2017-12-20 14:27 ` Dong Aisheng
2017-12-22 1:24 ` Stephen Boyd
2017-12-22 3:42 ` Dong Aisheng
2018-01-17 3:00 ` Dong Aisheng
2017-07-13 11:47 ` [PATCH V2 02/10] clk: reparent orphans after critical clocks enabled Dong Aisheng
2017-11-02 7:36 ` Stephen Boyd
2017-12-20 14:33 ` Dong Aisheng
2017-12-21 18:32 ` Stephen Boyd
2017-12-22 1:55 ` Stephen Boyd
2017-12-22 2:54 ` Dong Aisheng
2017-07-13 11:47 ` [PATCH V2 03/10] clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support Dong Aisheng
2017-07-13 11:47 ` [PATCH V2 04/10] clk: imx: add pllv4 support Dong Aisheng
2017-07-13 11:47 ` [PATCH V2 05/10] clk: imx: add pfdv2 support Dong Aisheng
2017-07-13 11:47 ` [PATCH V2 06/10] clk: imx: add composite clk support Dong Aisheng
2017-07-13 11:47 ` [PATCH V2 07/10] dt-bindings: clock: add imx7ulp clock binding doc Dong Aisheng
2017-07-13 11:47 ` [PATCH V2 08/10] clk: imx: make mux parent strings const Dong Aisheng
2017-07-13 11:47 ` [PATCH V2 09/10] clk: imx: implement new clk_hw based APIs Dong Aisheng
2017-07-13 11:47 ` [PATCH V2 10/10] clk: imx: add imx7ulp clk driver Dong Aisheng
2017-07-26 2:57 ` [PATCH V2 00/10] clk: add imx7ulp clk support A.s. Dong
2017-08-24 7:05 ` A.s. Dong
2017-09-11 7:25 ` Dong Aisheng [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170911072539.GA19297@b29396-OptiPlex-7040 \
--to=dongas86@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox