From: wenyou.yang@microchip.com (Wenyou Yang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/5] media: atmel-isc: Enable the clocks during probe
Date: Mon, 18 Sep 2017 14:39:23 +0800 [thread overview]
Message-ID: <20170918063925.6372-4-wenyou.yang@microchip.com> (raw)
In-Reply-To: <20170918063925.6372-1-wenyou.yang@microchip.com>
To meet the relationship, enable the HCLOCK and ispck during the
device probe, "isc_pck frequency is less than or equal to isc_ispck,
and isc_ispck is greater than or equal to HCLOCK."
Meanwhile, call the pm_runtime_enable() in the right place.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
Changes in v2: None
drivers/media/platform/atmel/atmel-isc.c | 31 +++++++++++++++++++++++++------
1 file changed, 25 insertions(+), 6 deletions(-)
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
index 8b9c1cafa348..3ecd2bf016a8 100644
--- a/drivers/media/platform/atmel/atmel-isc.c
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -1593,6 +1593,7 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
struct isc_subdev_entity *sd_entity;
struct video_device *vdev = &isc->video_dev;
struct vb2_queue *q = &isc->vb2_vidq;
+ struct device *dev = isc->dev;
int ret;
ret = v4l2_device_register_subdev_nodes(&isc->v4l2_dev);
@@ -1676,6 +1677,10 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
return ret;
}
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ pm_request_idle(dev);
+
return 0;
}
@@ -1855,25 +1860,37 @@ static int atmel_isc_probe(struct platform_device *pdev)
return ret;
}
+ ret = clk_prepare_enable(isc->hclock);
+ if (ret) {
+ dev_err(dev, "failed to enable hclock: %d\n", ret);
+ return ret;
+ }
+
ret = isc_clk_init(isc);
if (ret) {
dev_err(dev, "failed to init isc clock: %d\n", ret);
- goto clean_isc_clk;
+ goto unprepare_hclk;
}
isc->ispck = isc->isc_clks[ISC_ISPCK].clk;
+ ret = clk_prepare_enable(isc->ispck);
+ if (ret) {
+ dev_err(dev, "failed to enable ispck: %d\n", ret);
+ goto unprepare_hclk;
+ }
+
/* ispck should be greater or equal to hclock */
ret = clk_set_rate(isc->ispck, clk_get_rate(isc->hclock));
if (ret) {
dev_err(dev, "failed to set ispck rate: %d\n", ret);
- goto clean_isc_clk;
+ goto unprepare_clk;
}
ret = v4l2_device_register(dev, &isc->v4l2_dev);
if (ret) {
dev_err(dev, "unable to register v4l2 device.\n");
- goto clean_isc_clk;
+ goto unprepare_clk;
}
ret = isc_parse_dt(dev, isc);
@@ -1906,8 +1923,6 @@ static int atmel_isc_probe(struct platform_device *pdev)
break;
}
- pm_runtime_enable(dev);
-
return 0;
cleanup_subdev:
@@ -1916,7 +1931,11 @@ static int atmel_isc_probe(struct platform_device *pdev)
unregister_v4l2_device:
v4l2_device_unregister(&isc->v4l2_dev);
-clean_isc_clk:
+unprepare_clk:
+ clk_disable_unprepare(isc->ispck);
+unprepare_hclk:
+ clk_disable_unprepare(isc->hclock);
+
isc_clk_cleanup(isc);
return ret;
--
2.13.0
next prev parent reply other threads:[~2017-09-18 6:39 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-18 6:39 [PATCH v2 0/5] media: atmel-isc: Rework the format list and the clock Wenyou Yang
2017-09-18 6:39 ` [PATCH v2 1/5] media: atmel_isc: Add spin lock for clock enable ops Wenyou Yang
2017-09-27 7:16 ` Sakari Ailus
2017-09-28 6:11 ` Yang, Wenyou
2017-09-18 6:39 ` [PATCH v2 2/5] media: atmel-isc: Add prepare and unprepare ops Wenyou Yang
2017-09-18 6:39 ` Wenyou Yang [this message]
2017-09-18 6:39 ` [PATCH v2 4/5] media: atmel-isc: Remove unnecessary member Wenyou Yang
2017-09-18 6:39 ` [PATCH v2 5/5] media: atmel-isc: Rework the format list Wenyou Yang
2017-09-25 13:24 ` Hans Verkuil
2017-09-27 5:15 ` Yang, Wenyou
2017-09-27 8:03 ` Hans Verkuil
2017-09-28 5:32 ` Yang, Wenyou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170918063925.6372-4-wenyou.yang@microchip.com \
--to=wenyou.yang@microchip.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).