* [PATCH] arm: omap: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1
@ 2017-09-06 10:33 Keerthy
2017-09-18 11:39 ` Keerthy
0 siblings, 1 reply; 3+ messages in thread
From: Keerthy @ 2017-09-06 10:33 UTC (permalink / raw)
To: linux-arm-kernel
gpio1 soft reset fails in the kexec path as the optional clock
is not enabled hence enable the HWMOD_CONTROL_OPT_CLKS_IN_RESET
flag for gpio1 hwmod.
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 7cc3247..6ae729a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1037,6 +1037,7 @@ struct omap_hwmod dra7xx_sha0_hwmod = {
.name = "gpio1",
.class = &dra7xx_gpio_hwmod_class,
.clkdm_name = "wkupaon_clkdm",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.main_clk = "wkupaon_iclk_mux",
.prcm = {
.omap4 = {
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH] arm: omap: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1
2017-09-06 10:33 [PATCH] arm: omap: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1 Keerthy
@ 2017-09-18 11:39 ` Keerthy
2017-09-19 17:44 ` Tony Lindgren
0 siblings, 1 reply; 3+ messages in thread
From: Keerthy @ 2017-09-18 11:39 UTC (permalink / raw)
To: linux-arm-kernel
On Wednesday 06 September 2017 04:03 PM, Keerthy wrote:
> gpio1 soft reset fails in the kexec path as the optional clock
> is not enabled hence enable the HWMOD_CONTROL_OPT_CLKS_IN_RESET
> flag for gpio1 hwmod.
A gentle ping on this as well.
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> ---
> arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> index 7cc3247..6ae729a 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> @@ -1037,6 +1037,7 @@ struct omap_hwmod dra7xx_sha0_hwmod = {
> .name = "gpio1",
> .class = &dra7xx_gpio_hwmod_class,
> .clkdm_name = "wkupaon_clkdm",
> + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
> .main_clk = "wkupaon_iclk_mux",
> .prcm = {
> .omap4 = {
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH] arm: omap: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1
2017-09-18 11:39 ` Keerthy
@ 2017-09-19 17:44 ` Tony Lindgren
0 siblings, 0 replies; 3+ messages in thread
From: Tony Lindgren @ 2017-09-19 17:44 UTC (permalink / raw)
To: linux-arm-kernel
* Keerthy <j-keerthy@ti.com> [170918 04:40]:
>
>
> On Wednesday 06 September 2017 04:03 PM, Keerthy wrote:
> > gpio1 soft reset fails in the kexec path as the optional clock
> > is not enabled hence enable the HWMOD_CONTROL_OPT_CLKS_IN_RESET
> > flag for gpio1 hwmod.
>
> A gentle ping on this as well.
With v4.14-rc1 now out, applying into omap-for-v4.14/fixes.
I usually don't start applying fixes during the merge window
unless really needed.
Regards,
Tony
> > Signed-off-by: Keerthy <j-keerthy@ti.com>
> > ---
> > arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> > index 7cc3247..6ae729a 100644
> > --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> > +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> > @@ -1037,6 +1037,7 @@ struct omap_hwmod dra7xx_sha0_hwmod = {
> > .name = "gpio1",
> > .class = &dra7xx_gpio_hwmod_class,
> > .clkdm_name = "wkupaon_clkdm",
> > + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
> > .main_clk = "wkupaon_iclk_mux",
> > .prcm = {
> > .omap4 = {
> >
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-09-19 17:44 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-09-06 10:33 [PATCH] arm: omap: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1 Keerthy
2017-09-18 11:39 ` Keerthy
2017-09-19 17:44 ` Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).