From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Wed, 20 Sep 2017 09:52:23 +0200 Subject: [linux-sunxi] Re: [PATCH v4 1/6] dt-bindings: update the Allwinner GPADC device tree binding for H3 In-Reply-To: References: <20170914145251.21784-1-icenowy@aosc.io> <20170914145251.21784-2-icenowy@aosc.io> <20170918073336.j7finend3g76chsu@flea.lan> <310CE549-B8CE-4C0C-95B1-B545E38BDAF5@aosc.io> <20170918083045.7bfiialtbm7w6i7j@flea.lan> Message-ID: <20170920075223.jaeswlhcqgu4yhse@flea.home> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Sep 18, 2017 at 03:47:25PM +0000, icenowy at aosc.io wrote: > ? 2017-09-18 16:30?Maxime Ripard ??? > > On Mon, Sep 18, 2017 at 03:36:43PM +0800, Icenowy Zheng wrote: > > > ? 2017?9?18? GMT+08:00 ??3:33:36, Maxime Ripard > > > ??: > > > >On Thu, Sep 14, 2017 at 10:52:46PM +0800, Icenowy Zheng wrote: > > > >> Allwinner H3 features a thermal sensor like the one in A33, but has > > > >its > > > >> register re-arranged, the clock divider moved to CCU (originally the > > > >> clock divider is in ADC) and added a pair of bus clock and reset. > > > >> > > > >> Update the binding document to cover H3. > > > >> > > > >> Signed-off-by: Icenowy Zheng > > > >> Reviewed-by: Chen-Yu Tsai > > > >> --- > > > >> Changes in v4: > > > >> - Add nvmem calibration data (not yet used by the driver) > > > >> Changes in v3: > > > >> - Clock name changes. > > > >> - Example node name changes. > > > >> - Add interupts (not yet used by the driver). > > > >> > > > >> .../devicetree/bindings/mfd/sun4i-gpadc.txt | 30 > > > >++++++++++++++++++++-- > > > >> 1 file changed, 28 insertions(+), 2 deletions(-) > > > >> > > > >> diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt > > > >b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt > > > >> index badff3611a98..6c470d584bf9 100644 > > > >> --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt > > > >> +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt > > > >> @@ -4,12 +4,26 @@ The Allwinner SoCs all have an ADC that can also > > > >act as a thermal sensor > > > >> and sometimes as a touchscreen controller. > > > >> > > > >> Required properties: > > > >> - - compatible: "allwinner,sun8i-a33-ths", > > > >> + - compatible: must contain one of the following compatibles: > > > >> + - "allwinner,sun8i-a33-ths" > > > >> + - "allwinner,sun8i-h3-ths" > > > >> - reg: mmio address range of the chip, > > > >> - #thermal-sensor-cells: shall be 0, > > > >> - #io-channel-cells: shall be 0, > > > >> > > > >> -Example: > > > >> +Optional properties: > > > >> + - nvmem-cells: A phandle to the calibration data provided by a > > > >nvmem device. > > > >> + If unspecified default values shall be used. > > > >> + - nvmem-cell-names: Should be "calibration-data" > > > > > > > >I'd prefer to have which sensor it applies to here. It wouldn't change > > > >anything for the H3, but it definitely does for example for the A83t > > > >that has two sensors, one for each cluster, and one for the GPU, each > > > >with calibration data. > > > > > > > >What about cluster0-calibration? > > I prefer sensor0-calibration to sensor3-calibration now. > (Theortically the new generation THS can support up to 4 sensors) The mapping that explains what sensor0 means can change in the future. It's better to be explicit here, and just say upfront what it's about. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: