From mboxrd@z Thu Jan 1 00:00:00 1970 From: clabbe.montjoie@gmail.com (Corentin Labbe) Date: Thu, 21 Sep 2017 19:21:43 +0200 Subject: [PATCH 04/12] ARM: dts: nanopi: Fix node with unit name and no reg property In-Reply-To: <20170921172151.29779-1-clabbe.montjoie@gmail.com> References: <20170921172151.29779-1-clabbe.montjoie@gmail.com> Message-ID: <20170921172151.29779-5-clabbe.montjoie@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch fix the warning "xxx has a unit name, but no reg property" by removing "@0" from such node. Signed-off-by: Corentin Labbe --- arch/arm/boot/dts/sun8i-h3-nanopi.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi index c6decee41a27..7646e331bd29 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -81,7 +81,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sw_r_npi>; - k1 at 0 { + k1 { label = "k1"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; @@ -108,19 +108,19 @@ }; &pio { - leds_npi: led_pins at 0 { + leds_npi: led_pins { pins = "PA10"; function = "gpio_out"; }; }; &r_pio { - leds_r_npi: led_pins at 0 { + leds_r_npi: led_pins { pins = "PL10"; function = "gpio_out"; }; - sw_r_npi: key_pins at 0 { + sw_r_npi: key_pins { pins = "PL3"; function = "gpio_in"; }; -- 2.13.5