From mboxrd@z Thu Jan  1 00:00:00 1970
From: boris.brezillon@free-electrons.com (Boris Brezillon)
Date: Thu, 5 Oct 2017 14:53:43 +0200
Subject: [PATCH 0/3] Enable NAND on Armada-7040-DB board
In-Reply-To: <20170925145352.13145-1-miquel.raynal@free-electrons.com>
References: <20170925145352.13145-1-miquel.raynal@free-electrons.com>
Message-ID: <20171005145343.1ba59fb7@bbrezillon>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Mon, 25 Sep 2017 16:53:49 +0200
Miquel Raynal <miquel.raynal@free-electrons.com> wrote:

> Hi,
> 
> This series adds support for NAND on Armada-7040-DB board.
> 
> Besides standard NAND node addition, it also introduces a new compatible
> string for the pxa3xx_nand driver to support the subitilities of A7k/A8k
> SoCs, as well as a new property used by the pxa3xx_nand driver to grab a
> phandle on the system control node in order to enable the NAND
> controller itself.
> 
> Regards,
> Miquel
> 
> 
> Gregory CLEMENT (1):
>   arm64: dts: marvell: add NAND support on the 7040-DB board
> 
> Miquel Raynal (2):
>   Documentation: devicetree: add pxa3xx compatible and syscon property
>   mtd: nand: pxa3xx: enable NAND controller if the SoC needs it

Applied patch 1 and 2.

Thanks,

Boris

> 
>  .../devicetree/bindings/mtd/pxa3xx-nand.txt        |  4 +++
>  arch/arm64/boot/dts/marvell/armada-7040-db.dts     | 24 +++++++++++++
>  arch/arm64/boot/dts/marvell/armada-70x0.dtsi       | 14 ++++++++
>  .../boot/dts/marvell/armada-cp110-master.dtsi      |  3 +-
>  drivers/mtd/nand/pxa3xx_nand.c                     | 41 +++++++++++++++++++---
>  5 files changed, 81 insertions(+), 5 deletions(-)
>