linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: james.morse@arm.com (James Morse)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 13/20] arm64: cpufeature: Enable IESB on exception entry/return for firmware-first
Date: Thu,  5 Oct 2017 20:18:05 +0100	[thread overview]
Message-ID: <20171005191812.5678-14-james.morse@arm.com> (raw)
In-Reply-To: <20171005191812.5678-1-james.morse@arm.com>

ARM v8.2 has a feature to add implicit error synchronization barriers
whenever the CPU enters or returns from an exception level. Add code to
detect this feature and enable the SCTLR_ELx.IESB bit.

This feature causes RAS errors that are not yet visible to software to
become pending SErrors. We expect to have firmware-first RAS support
so synchronised RAS errors will be take immediately to EL3.
Any system without firmware-first handling of errors will take the SError
either immediately after exception return, or when we unmask SError after
entry.S's work.

Platform level RAS support may require additional firmware support.

Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>

---
Note the sneaky KVM change,

 arch/arm64/Kconfig                 | 15 +++++++++++++++
 arch/arm64/include/asm/cpucaps.h   |  3 ++-
 arch/arm64/include/asm/processor.h |  1 +
 arch/arm64/include/asm/sysreg.h    |  1 +
 arch/arm64/kernel/cpufeature.c     | 21 +++++++++++++++++++++
 arch/arm64/kvm/hyp-init.S          |  3 +++
 6 files changed, 43 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index b68f5e93baac..29df2a93688c 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -989,6 +989,21 @@ config ARM64_RAS_EXTN
 	  and access the new registers if the system supports the extension.
 	  Platform RAS features may additionally depend on firmware support.
 
+config ARM64_IESB
+	bool "Enable Implicit Error Synchronization Barrier (IESB)"
+	default y
+	depends on ARM64_RAS_EXTN
+	help
+	  ARM v8.2 adds a feature to add implicit error synchronization
+	  barriers whenever the CPU enters or exits a particular exception
+	  level.
+
+	  On CPUs with this feature and the 'RAS Extensions' feature, we can
+	  use this to contain detected (but not yet reported) errors to the
+	  relevant exception level.
+
+	  The feature is detected at runtime, selecting this option will
+	  enable these implicit barriers if the CPU supports the feature.
 endmenu
 
 config ARM64_MODULE_CMODEL_LARGE
diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h
index 4820d441bfb9..7a2bbbfdff49 100644
--- a/arch/arm64/include/asm/cpucaps.h
+++ b/arch/arm64/include/asm/cpucaps.h
@@ -41,7 +41,8 @@
 #define ARM64_WORKAROUND_CAVIUM_30115		20
 #define ARM64_HAS_DCPOP				21
 #define ARM64_HAS_RAS_EXTN			22
+#define ARM64_HAS_IESB				23
 
-#define ARM64_NCAPS				23
+#define ARM64_NCAPS				24
 
 #endif /* __ASM_CPUCAPS_H */
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 29adab8138c3..6b72ddc33d06 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -193,5 +193,6 @@ static inline void spin_lock_prefetch(const void *ptr)
 
 int cpu_enable_pan(void *__unused);
 int cpu_enable_cache_maint_trap(void *__unused);
+int cpu_enable_iesb(void *__unused);
 
 #endif /* __ASM_PROCESSOR_H */
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 64e2a80fd749..4500a70c6a57 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -297,6 +297,7 @@
 
 /* Common SCTLR_ELx flags. */
 #define SCTLR_ELx_EE    (1 << 25)
+#define SCTLR_ELx_IESB	(1 << 21)
 #define SCTLR_ELx_I	(1 << 12)
 #define SCTLR_ELx_SA	(1 << 3)
 #define SCTLR_ELx_C	(1 << 2)
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 0fc017b55cb1..626539995316 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -912,6 +912,19 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.field_pos = ID_AA64PFR0_RAS_SHIFT,
 		.min_field_value = ID_AA64PFR0_RAS_V1,
 	},
+#ifdef CONFIG_ARM64_IESB
+	{
+		.desc = "Implicit Error Synchronization Barrier",
+		.capability = ARM64_HAS_IESB,
+		.def_scope = SCOPE_SYSTEM,
+		.matches = has_cpuid_feature,
+		.sys_reg = SYS_ID_AA64MMFR2_EL1,
+		.sign = FTR_UNSIGNED,
+		.field_pos = ID_AA64MMFR2_IESB_SHIFT,
+		.min_field_value = 1,
+		.enable = cpu_enable_iesb,
+	},
+#endif /* CONFIG_ARM64_IESB */
 #endif /* CONFIG_ARM64_RAS_EXTN */
 	{},
 };
@@ -1321,3 +1334,11 @@ static int __init enable_mrs_emulation(void)
 }
 
 late_initcall(enable_mrs_emulation);
+
+int cpu_enable_iesb(void *__unused)
+{
+	if (cpus_have_cap(ARM64_HAS_RAS_EXTN))
+		config_sctlr_el1(0, SCTLR_ELx_IESB);
+
+	return 0;
+}
diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S
index 3f9615582377..8983e9473017 100644
--- a/arch/arm64/kvm/hyp-init.S
+++ b/arch/arm64/kvm/hyp-init.S
@@ -113,6 +113,9 @@ __do_hyp_init:
 	 */
 	ldr	x4, =(SCTLR_EL2_RES1 | (SCTLR_ELx_FLAGS & ~SCTLR_ELx_A))
 CPU_BE(	orr	x4, x4, #SCTLR_ELx_EE)
+alternative_if ARM64_HAS_IESB
+	orr	x4, x4, #SCTLR_ELx_IESB
+alternative_else_nop_endif
 	msr	sctlr_el2, x4
 	isb
 
-- 
2.13.3

  parent reply	other threads:[~2017-10-05 19:18 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-05 19:17 [PATCH v3 00/20] SError rework + RAS&IESB for firmware first support James Morse
2017-10-05 19:17 ` [PATCH v3 01/20] arm64: explicitly mask all exceptions James Morse
2017-10-11 16:30   ` Julien Thierry
2017-10-12 12:26     ` James Morse
2017-10-18 14:23   ` Catalin Marinas
2017-10-18 14:25     ` Catalin Marinas
2017-10-05 19:17 ` [PATCH v3 02/20] arm64: introduce an order for exceptions James Morse
2017-10-11 17:11   ` Julien Thierry
2017-10-05 19:17 ` [PATCH v3 03/20] arm64: Move the async/fiq helpers to explicitly set process context flags James Morse
2017-10-05 19:17 ` [PATCH v3 04/20] arm64: Mask all exceptions during kernel_exit James Morse
2017-10-05 19:17 ` [PATCH v3 05/20] arm64: entry.S: Remove disable_dbg James Morse
2017-10-05 19:17 ` [PATCH v3 06/20] arm64: entry.S: convert el1_sync James Morse
2017-10-05 19:17 ` [PATCH v3 07/20] arm64: entry.S convert el0_sync James Morse
2017-10-05 19:18 ` [PATCH v3 08/20] arm64: entry.S: convert elX_irq James Morse
2017-10-11 17:13   ` Julien Thierry
2017-10-12 12:26     ` James Morse
2017-10-05 19:18 ` [PATCH v3 09/20] KVM: arm/arm64: mask/unmask daif around VHE guests James Morse
2017-10-11  9:01   ` Marc Zyngier
2017-10-11 15:40     ` James Morse
2017-10-05 19:18 ` [PATCH v3 10/20] arm64: entry.S: move SError handling into a C function for future expansion James Morse
2017-10-05 19:18 ` [PATCH v3 11/20] arm64: cpufeature: Detect CPU RAS Extentions James Morse
2017-10-05 19:18 ` [PATCH v3 12/20] arm64: kernel: Survive corrected RAS errors notified by SError James Morse
2017-10-05 19:18 ` James Morse [this message]
2017-10-18 16:43   ` [PATCH v3 13/20] arm64: cpufeature: Enable IESB on exception entry/return for firmware-first Catalin Marinas
2017-10-18 17:14     ` James Morse
2017-10-05 19:18 ` [PATCH v3 14/20] arm64: kernel: Prepare for a DISR user James Morse
2017-10-05 19:18 ` [PATCH v3 15/20] KVM: arm64: Set an impdef ESR for Virtual-SError using VSESR_EL2 James Morse
2017-10-13  9:25   ` gengdongjiu
2017-10-13 16:53     ` James Morse
2017-10-05 19:18 ` [PATCH v3 16/20] KVM: arm64: Save/Restore guest DISR_EL1 James Morse
2017-10-05 19:18 ` [PATCH v3 17/20] KVM: arm64: Save ESR_EL2 on guest SError James Morse
2017-10-05 19:18 ` [PATCH v3 18/20] KVM: arm64: Handle RAS SErrors from EL1 on guest exit James Morse
2017-10-05 19:18 ` [PATCH v3 19/20] KVM: arm64: Handle RAS SErrors from EL2 " James Morse
2017-10-11 10:37   ` Marc Zyngier
2017-10-12 12:28     ` James Morse
2017-10-05 19:18 ` [PATCH v3 20/20] KVM: arm64: Take any host SError before entering the guest James Morse
2017-10-18 16:55 ` [PATCH v3 00/20] SError rework + RAS&IESB for firmware first support Catalin Marinas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171005191812.5678-14-james.morse@arm.com \
    --to=james.morse@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).