From: bjorn.andersson@linaro.org (Bjorn Andersson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: qcom: add MSM8660 GSBI6 and GSBI7
Date: Tue, 10 Oct 2017 11:07:48 -0700 [thread overview]
Message-ID: <20171010180748.GC1165@minitux> (raw)
In-Reply-To: <20171010083924.19244-1-linus.walleij@linaro.org>
On Tue 10 Oct 01:39 PDT 2017, Linus Walleij wrote:
> This adds the GSBI6 and GSBI7 IO blocks to the MSM8660 DTSI file.
> On the APQ8060 DragonBoard, GSBI6 DM is used for Bluetooth UART,
> and GSBI7 I2C is used for FM radio I2C.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> ---
> arch/arm/boot/dts/qcom-msm8660.dtsi | 67 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 67 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
> index 1b5d31b33b5e..4f02489bcb2e 100644
> --- a/arch/arm/boot/dts/qcom-msm8660.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
> @@ -123,6 +123,73 @@
> reg = <0x900000 0x4000>;
> };
>
> + gsbi6: gsbi at 16500000 {
> + compatible = "qcom,gsbi-v1.0.0";
> + cell-index = <12>;
> + reg = <0x16500000 0x100>;
> + clocks = <&gcc GSBI6_H_CLK>;
> + clock-names = "iface";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + syscon-tcsr = <&tcsr>;
> +
> + gsbi6_serial: serial at 16540000 {
> + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> + reg = <0x16540000 0x1000>,
> + <0x16500000 0x1000>;
> + interrupts = <GIC_SPI 156 IRQ_TYPE_NONE>;
> + clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
> + clock-names = "core", "iface";
> + status = "disabled";
> + };
> +
> + gsbi6_i2c: i2c at 16580000 {
> + compatible = "qcom,i2c-qup-v1.1.1";
> + reg = <0x16580000 0x1000>;
> + interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
> + clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
> + clock-names = "core", "iface";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> + };
> +
> + gsbi7: gsbi at 16600000 {
> + compatible = "qcom,gsbi-v1.0.0";
> + cell-index = <12>;
> + reg = <0x16600000 0x100>;
> + clocks = <&gcc GSBI7_H_CLK>;
> + clock-names = "iface";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + syscon-tcsr = <&tcsr>;
> +
> + gsbi7_serial: serial at 16640000 {
> + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> + reg = <0x16640000 0x1000>,
> + <0x16600000 0x1000>;
> + interrupts = <GIC_SPI 158 IRQ_TYPE_NONE>;
> + clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
> + clock-names = "core", "iface";
> + status = "disabled";
> + };
> +
> + gsbi7_i2c: i2c at 16680000 {
> + compatible = "qcom,i2c-qup-v1.1.1";
> + reg = <0x16680000 0x1000>;
> + interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
> + clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
> + clock-names = "core", "iface";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> + };
>
> gsbi8: gsbi at 19800000 {
> compatible = "qcom,gsbi-v1.0.0";
> --
> 2.13.5
>
prev parent reply other threads:[~2017-10-10 18:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-10 8:39 [PATCH] ARM: dts: qcom: add MSM8660 GSBI6 and GSBI7 Linus Walleij
2017-10-10 18:07 ` Bjorn Andersson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171010180748.GC1165@minitux \
--to=bjorn.andersson@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).