From: cdall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/37] KVM: arm64: Avoid storing the vcpu pointer on the stack
Date: Thu, 12 Oct 2017 19:02:16 +0200 [thread overview]
Message-ID: <20171012170216.GA26425@cbox> (raw)
In-Reply-To: <ef4bffe5-b3c5-5fdd-cb8b-1840d2243ae1@arm.com>
On Thu, Oct 12, 2017 at 04:49:44PM +0100, Marc Zyngier wrote:
> On 12/10/17 11:41, Christoffer Dall wrote:
> > We already have the percpu area for the host cpu state, which points to
> > the VCPU, so there's no need to store the VCPU pointer on the stack on
> > every context switch. We can be a little more clever and just use
> > tpidr_el2 for the percpu offset and load the VCPU pointer from the host
> > context.
> >
> > This requires us to have a scratch register though, so we take the
> > chance to rearrange some of the el1_sync code to only look at the
> > vttbr_el2 to determine if this is a trap from the guest or an HVC from
> > the host. We do add an extra check to call the panic code if the kernel
> > is configured with debugging enabled and we saw a trap from the host
> > which wasn't an HVC, indicating that we left some EL2 trap configured by
> > mistake.
> >
> > Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
> > ---
> > arch/arm64/include/asm/kvm_asm.h | 20 ++++++++++++++++++++
> > arch/arm64/kernel/asm-offsets.c | 1 +
> > arch/arm64/kvm/hyp/entry.S | 5 +----
> > arch/arm64/kvm/hyp/hyp-entry.S | 39 ++++++++++++++++++---------------------
> > arch/arm64/kvm/hyp/switch.c | 2 +-
> > 5 files changed, 41 insertions(+), 26 deletions(-)
> >
> > diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
> > index ab4d0a9..7e48a39 100644
> > --- a/arch/arm64/include/asm/kvm_asm.h
> > +++ b/arch/arm64/include/asm/kvm_asm.h
> > @@ -70,4 +70,24 @@ extern u32 __init_stage2_translation(void);
> >
> > #endif
> >
> > +#ifdef __ASSEMBLY__
> > +.macro get_host_ctxt reg, tmp
> > + /*
> > + * '=kvm_host_cpu_state' is a host VA from the constant pool, it may
> > + * not be accessible by this address from EL2, hyp_panic() converts
> > + * it with kern_hyp_va() before use.
> > + */
>
> This really looks like a stale comment, as there is no hyp_panic
> involved here anymore (thankfully!).
>
yeah, I suppose.
> > + ldr \reg, =kvm_host_cpu_state
> > + mrs \tmp, tpidr_el2
> > + add \reg, \reg, \tmp
> > + kern_hyp_va \reg
>
> Here, we're trading a load from the stack for a load from the constant
> pool. Can't we do something like:
>
> adr_l \reg, kvm_host_cpu_state
> msr \tmp, tpidr_el2
> add \reg, \reg, \tmp
>
> and that's it?
That's definitely what the compiler generates from C code...
> This relies on the property that the kernel/hyp offset is
> constant, and that it doesn't matter if we add the offset to a kernel VA
> or a HYP VA... Completely untested of course!
>
You're the hyp VA expert. Is it valid to rely on that assumption?
> > +.endm
> > +
> > +.macro get_vcpu vcpu, ctxt
> > + ldr \vcpu, [\ctxt, #HOST_CONTEXT_VCPU]
> > + kern_hyp_va \vcpu
> > +.endm
> > +
> > +#endif
> > +
> > #endif /* __ARM_KVM_ASM_H__ */
> > diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
> > index 71bf088..612021d 100644
> > --- a/arch/arm64/kernel/asm-offsets.c
> > +++ b/arch/arm64/kernel/asm-offsets.c
> > @@ -135,6 +135,7 @@ int main(void)
> > DEFINE(CPU_FP_REGS, offsetof(struct kvm_regs, fp_regs));
> > DEFINE(VCPU_FPEXC32_EL2, offsetof(struct kvm_vcpu, arch.ctxt.sys_regs[FPEXC32_EL2]));
> > DEFINE(VCPU_HOST_CONTEXT, offsetof(struct kvm_vcpu, arch.host_cpu_context));
> > + DEFINE(HOST_CONTEXT_VCPU, offsetof(struct kvm_cpu_context, __hyp_running_vcpu));
> > #endif
> > #ifdef CONFIG_CPU_PM
> > DEFINE(CPU_SUSPEND_SZ, sizeof(struct cpu_suspend_ctx));
> > diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S
> > index 9a8ab5d..76cd48f 100644
> > --- a/arch/arm64/kvm/hyp/entry.S
> > +++ b/arch/arm64/kvm/hyp/entry.S
> > @@ -62,9 +62,6 @@ ENTRY(__guest_enter)
> > // Store the host regs
> > save_callee_saved_regs x1
> >
> > - // Store host_ctxt and vcpu for use at exit time
> > - stp x1, x0, [sp, #-16]!
> > -
> > add x18, x0, #VCPU_CONTEXT
> >
> > // Restore guest regs x0-x17
> > @@ -119,7 +116,7 @@ ENTRY(__guest_exit)
> > save_callee_saved_regs x1
> >
> > // Restore the host_ctxt from the stack
>
> Stale comment again.
>
yeah...
> > - ldr x2, [sp], #16
> > + get_host_ctxt x2, x3
> >
> > // Now restore the host regs
> > restore_callee_saved_regs x2
> > diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S
> > index e4f37b9..2950f26 100644
> > --- a/arch/arm64/kvm/hyp/hyp-entry.S
> > +++ b/arch/arm64/kvm/hyp/hyp-entry.S
> > @@ -56,19 +56,16 @@ ENDPROC(__vhe_hyp_call)
> > el1_sync: // Guest trapped into EL2
> > stp x0, x1, [sp, #-16]!
> >
> > -alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
> > - mrs x1, esr_el2
> > -alternative_else
> > - mrs x1, esr_el1
> > -alternative_endif
> > - lsr x0, x1, #ESR_ELx_EC_SHIFT
> > -
> > - cmp x0, #ESR_ELx_EC_HVC64
> > - b.ne el1_trap
> > -
> > mrs x1, vttbr_el2 // If vttbr is valid, the 64bit guest
> > cbnz x1, el1_trap // called HVC
>
> Comment is outdated. Any guest trap will take this path.
>
yeah...
> >
> > +#ifdef CONFIG_DEBUG
> > + mrs x0, esr_el2
> > + lsr x0, x0, #ESR_ELx_EC_SHIFT
> > + cmp x0, #ESR_ELx_EC_HVC64
> > + b.ne __hyp_panic
> > +#endif
> > +
> > /* Here, we're pretty sure the host called HVC. */
> > ldp x0, x1, [sp], #16
> >
> > @@ -101,10 +98,15 @@ alternative_endif
> > eret
> >
> > el1_trap:
> > + get_host_ctxt x0, x1
> > + get_vcpu x1, x0
> > +
> > + mrs x0, esr_el2
> > + lsr x0, x0, #ESR_ELx_EC_SHIFT
> > /*
> > * x0: ESR_EC
> > + * x1: vcpu pointer
> > */
> > - ldr x1, [sp, #16 + 8] // vcpu stored by __guest_enter
> >
> > /*
> > * We trap the first access to the FP/SIMD to save the host context
> > @@ -122,13 +124,15 @@ alternative_else_nop_endif
> >
> > el1_irq:
> > stp x0, x1, [sp, #-16]!
> > - ldr x1, [sp, #16 + 8]
> > + get_host_ctxt x0, x1
> > + get_vcpu x1, x0
> > mov x0, #ARM_EXCEPTION_IRQ
> > b __guest_exit
> >
> > el1_error:
> > stp x0, x1, [sp, #-16]!
> > - ldr x1, [sp, #16 + 8]
> > + get_host_ctxt x0, x1
> > + get_vcpu x1, x0
> > mov x0, #ARM_EXCEPTION_EL1_SERROR
> > b __guest_exit
> >
> > @@ -164,14 +168,7 @@ ENTRY(__hyp_do_panic)
> > ENDPROC(__hyp_do_panic)
> >
> > ENTRY(__hyp_panic)
> > - /*
> > - * '=kvm_host_cpu_state' is a host VA from the constant pool, it may
> > - * not be accessible by this address from EL2, hyp_panic() converts
> > - * it with kern_hyp_va() before use.
> > - */
> > - ldr x0, =kvm_host_cpu_state
> > - mrs x1, tpidr_el2
> > - add x0, x0, x1
> > + get_host_ctxt x0, x1
> > b hyp_panic
> > ENDPROC(__hyp_panic)
> >
> > diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> > index 69ef24a..a0123ad 100644
> > --- a/arch/arm64/kvm/hyp/switch.c
> > +++ b/arch/arm64/kvm/hyp/switch.c
> > @@ -435,7 +435,7 @@ void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *__host_ctxt)
> > if (read_sysreg(vttbr_el2)) {
> > struct kvm_cpu_context *host_ctxt;
> >
> > - host_ctxt = kern_hyp_va(__host_ctxt);
> > + host_ctxt = __host_ctxt;
>
> Can't we just rename __host_ctxt to host_ctxt and drop the local definition?
>
yes, patch splitting snafu. Will fix.
By the way, what I'm going for is anything in the hyp address space has
leading __, and otherwise ot.
> > vcpu = host_ctxt->__hyp_running_vcpu;
> > __timer_disable_traps(vcpu);
> > __deactivate_traps(vcpu);
> >
>
Thanks,
-Christoffer
next prev parent reply other threads:[~2017-10-12 17:02 UTC|newest]
Thread overview: 127+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-12 10:41 [PATCH 00/37] Optimize KVM/ARM for VHE systems Christoffer Dall
2017-10-12 10:41 ` [PATCH 01/37] KVM: arm64: Avoid storing the vcpu pointer on the stack Christoffer Dall
2017-10-12 15:49 ` Marc Zyngier
2017-10-12 17:02 ` Christoffer Dall [this message]
2017-10-13 11:31 ` Marc Zyngier
2017-11-23 20:59 ` Christoffer Dall
2017-11-27 11:11 ` James Morse
2017-11-29 18:20 ` Christoffer Dall
2017-11-06 17:22 ` Andrew Jones
2017-11-07 8:24 ` Christoffer Dall
2017-10-12 10:41 ` [PATCH 02/37] KVM: arm64: Rework hyp_panic for VHE and non-VHE Christoffer Dall
2017-10-12 15:55 ` Marc Zyngier
2017-10-12 17:06 ` Christoffer Dall
2017-10-12 10:41 ` [PATCH 03/37] KVM: arm64: Move HCR_INT_OVERRIDE to default HCR_EL2 guest flag Christoffer Dall
2017-10-12 16:20 ` Marc Zyngier
2017-10-12 10:41 ` [PATCH 04/37] KVM: arm/arm64: Get rid of vcpu->arch.irq_lines Christoffer Dall
2017-10-12 16:24 ` Marc Zyngier
2017-11-06 17:58 ` Andrew Jones
2017-11-14 12:17 ` Julien Thierry
2017-11-16 16:11 ` Julien Thierry
2017-11-26 16:04 ` Christoffer Dall
2017-10-12 10:41 ` [PATCH 05/37] KVM: Record the executing ioctl number on the vcpu struct Christoffer Dall
2017-10-13 17:13 ` Radim Krčmář
2017-10-13 17:31 ` Christoffer Dall
2017-10-13 18:38 ` Radim Krčmář
2017-10-13 18:51 ` Christoffer Dall
2017-11-07 10:45 ` Andrew Jones
2017-11-22 20:28 ` Christoffer Dall
2017-10-12 10:41 ` [PATCH 06/37] KVM: arm/arm64: Only load/put VCPU state for KVM_RUN Christoffer Dall
2017-10-12 10:41 ` [PATCH 07/37] KVM: arm/arm64: Add kvm_vcpu_load_sysregs and kvm_vcpu_put_sysregs Christoffer Dall
2017-11-07 10:56 ` Andrew Jones
2017-11-07 11:10 ` Andrew Jones
2017-11-22 20:34 ` Christoffer Dall
2017-11-23 11:08 ` Andrew Jones
2017-10-12 10:41 ` [PATCH 08/37] KVM: arm64: Defer restoring host VFP state to vcpu_put Christoffer Dall
2017-11-07 13:15 ` Andrew Jones
2017-11-26 16:24 ` Christoffer Dall
2017-11-15 16:04 ` Andrew Jones
2017-11-26 16:17 ` Christoffer Dall
2017-11-27 8:32 ` Andrew Jones
2017-11-25 7:52 ` Yury Norov
2017-11-26 16:17 ` Christoffer Dall
2017-11-26 18:58 ` Yury Norov
2017-11-26 19:18 ` Christoffer Dall
2017-11-27 6:25 ` Yury Norov
2017-11-30 19:07 ` Marc Zyngier
2017-10-12 10:41 ` [PATCH 09/37] KVM: arm64: Move debug dirty flag calculation out of world switch Christoffer Dall
2017-11-07 14:09 ` Andrew Jones
2017-11-25 8:09 ` Yury Norov
2017-12-01 17:25 ` Christoffer Dall
2017-12-03 13:17 ` Andrew Jones
2017-10-12 10:41 ` [PATCH 10/37] KVM: arm64: Slightly improve debug save/restore functions Christoffer Dall
2017-11-07 14:22 ` Andrew Jones
2017-12-01 17:51 ` Christoffer Dall
2017-11-14 16:42 ` Julien Thierry
2017-12-01 15:19 ` Christoffer Dall
2017-12-06 15:38 ` Julien Thierry
2017-10-12 10:41 ` [PATCH 11/37] KVM: arm64: Improve debug register save/restore flow Christoffer Dall
2017-11-07 14:48 ` Andrew Jones
2017-12-01 17:52 ` Christoffer Dall
2017-12-03 13:49 ` Andrew Jones
2017-12-03 20:47 ` Christoffer Dall
2017-10-12 10:41 ` [PATCH 12/37] KVM: arm64: Factor out fault info population and gic workarounds Christoffer Dall
2017-11-07 15:12 ` Andrew Jones
2017-10-12 10:41 ` [PATCH 13/37] KVM: arm64: Introduce VHE-specific kvm_vcpu_run Christoffer Dall
2017-11-07 15:25 ` Andrew Jones
2017-12-01 18:10 ` Christoffer Dall
2017-10-12 10:41 ` [PATCH 14/37] KVM: arm64: Remove kern_hyp_va() use in VHE switch function Christoffer Dall
2017-11-07 16:07 ` Andrew Jones
2017-10-12 10:41 ` [PATCH 15/37] KVM: arm64: Don't deactivate VM on VHE systems Christoffer Dall
2017-11-07 16:14 ` Andrew Jones
2017-12-03 19:27 ` Christoffer Dall
2017-10-12 10:41 ` [PATCH 16/37] KVM: arm64: Remove noop calls to timer save/restore from VHE switch Christoffer Dall
2017-11-07 16:25 ` Andrew Jones
2017-12-03 19:27 ` Christoffer Dall
2017-10-12 10:41 ` [PATCH 17/37] KVM: arm64: Move userspace system registers into separate function Christoffer Dall
2017-11-08 9:32 ` Andrew Jones
2017-12-03 19:36 ` Christoffer Dall
2017-10-12 10:41 ` [PATCH 18/37] KVM: arm64: Rewrite sysreg alternatives to static keys Christoffer Dall
2017-10-12 10:41 ` [PATCH 19/37] KVM: arm64: Introduce separate VHE/non-VHE sysreg save/restore functions Christoffer Dall
2017-11-08 10:31 ` Andrew Jones
2017-10-12 10:41 ` [PATCH 20/37] KVM: arm64: Unify non-VHE host/guest sysreg save and restore functions Christoffer Dall
2017-11-08 10:39 ` Andrew Jones
2017-12-03 19:41 ` Christoffer Dall
2017-10-12 10:41 ` [PATCH 21/37] KVM: arm64: Don't save the host ELR_EL2 and SPSR_EL2 on VHE systems Christoffer Dall
2017-11-08 17:03 ` Andrew Jones
2017-12-03 19:45 ` Christoffer Dall
2017-10-12 10:41 ` [PATCH 22/37] KVM: arm64: Change 32-bit handling of VM system registers Christoffer Dall
2017-11-13 16:25 ` Andrew Jones
2017-10-12 10:41 ` [PATCH 23/37] KVM: arm64: Prepare to handle traps on deferred VM sysregs Christoffer Dall
2017-11-13 17:54 ` Andrew Jones
2017-12-03 19:50 ` Christoffer Dall
2017-12-04 10:05 ` Andrew Jones
2017-10-12 10:41 ` [PATCH 24/37] KVM: arm64: Prepare to handle traps on deferred EL0 sysregs Christoffer Dall
2017-11-15 9:25 ` Julien Thierry
2017-12-03 19:51 ` Christoffer Dall
2017-10-12 10:41 ` [PATCH 25/37] KVM: arm64: Prepare to handle traps on remaining deferred EL1 sysregs Christoffer Dall
2017-11-13 18:56 ` Andrew Jones
2017-12-03 20:29 ` Christoffer Dall
2017-10-12 10:41 ` [PATCH 26/37] KVM: arm64: Prepare to handle traps on deferred AArch32 sysregs Christoffer Dall
2017-11-13 19:07 ` Andrew Jones
2017-12-03 20:35 ` Christoffer Dall
2017-10-12 10:41 ` [PATCH 27/37] KVM: arm64: Defer saving/restoring system registers to vcpu load/put on VHE Christoffer Dall
2017-10-12 10:41 ` [PATCH 28/37] KVM: arm64: Move common VHE/non-VHE trap config in separate functions Christoffer Dall
2017-11-25 10:43 ` Yury Norov
2017-11-25 10:49 ` Russell King - ARM Linux
2017-10-12 10:41 ` [PATCH 29/37] KVM: arm64: Configure FPSIMD traps on vcpu load/put for VHE Christoffer Dall
2017-10-12 10:41 ` [PATCH 30/37] KVM: arm64: Configure c15, PMU, and debug register traps on cpu " Christoffer Dall
2017-10-12 10:41 ` [PATCH 31/37] KVM: arm64: Separate activate_traps and deactive_traps for VHE and non-VHE Christoffer Dall
2017-10-12 10:41 ` [PATCH 32/37] KVM: arm/arm64: Handle VGICv2 save/restore from the main VGIC code Christoffer Dall
2017-11-15 17:50 ` Andre Przywara
2017-11-26 10:29 ` Yury Norov
2017-11-26 19:46 ` Christoffer Dall
2017-11-30 12:09 ` Yury Norov
2017-11-26 19:37 ` Christoffer Dall
2017-10-12 10:41 ` [PATCH 33/37] KVM: arm/arm64: Move arm64-only vgic-v2-sr.c file to arm64 Christoffer Dall
2017-11-15 17:52 ` Andre Przywara
2017-10-12 10:41 ` [PATCH 34/37] KVM: arm/arm64: Handle VGICv3 save/restore from the main VGIC code on VHE Christoffer Dall
2017-10-12 10:41 ` [PATCH 35/37] KVM: arm/arm64: Get rid of vgic_elrsr Christoffer Dall
2017-11-26 14:39 ` Yury Norov
2017-11-26 19:53 ` Christoffer Dall
2017-10-12 10:41 ` [PATCH 36/37] KVM: arm/arm64: Move VGIC APR save/restore to vgic put/load Christoffer Dall
2017-11-26 15:09 ` Yury Norov
2017-11-26 19:55 ` Christoffer Dall
2017-10-12 10:41 ` [PATCH 37/37] KVM: arm/arm64: Avoid VGICv3 save/restore on VHE with no IRQs Christoffer Dall
2017-11-30 18:33 ` Yury Norov
2017-12-03 20:38 ` Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171012170216.GA26425@cbox \
--to=cdall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).