[PATCH 1/6] ARM: dts: imx51-apf51dev: Fix 'backlight@bl1' node with unit name and no reg property

[PATCH 1/6] ARM: dts: imx51-apf51dev: Fix 'backlight@bl1' node with unit name and no reg property

[Marco Franchi]

The following build warning is seen with W=1:

Warning (unit_address_vs_reg): Node /backlight at bl1 has a unit name, but no reg property

Fix this warning by changing '@' to '-'.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
---
 arch/arm/boot/dts/imx51-apf51dev.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index a5e6091..75a9a4e4 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -16,7 +16,7 @@
 	model = "Armadeus Systems APF51Dev docking/development board";
 	compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
 
-	backlight at bl1{
+	backlight-bl1{
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_backlight>;
 		compatible = "gpio-backlight";
-- 
2.7.4

[PATCH 2/6] ARM: dts: imx51-ts4800: Fix 'port@0' node with unit name and no reg property

[Marco Franchi]

The following build warning is seen with W=1:

Warning (unit_address_vs_reg): Node /display-di0/port at 0 has a unit name, but no reg property

Fix this warning by removing '@' from such node.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
---
 arch/arm/boot/dts/imx51-ts4800.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
index ca1cc5e..7c50b90 100644
--- a/arch/arm/boot/dts/imx51-ts4800.dts
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -71,7 +71,7 @@
 			};
 		};
 
-		port at 0 {
+		port {
 			display0_in: endpoint {
 				remote-endpoint = <&ipu_di0_disp0>;
 			};
-- 
2.7.4

[PATCH 2/6] ARM: dts: imx51-ts4800: Fix 'port@0' node with unit name and no reg property

[Shawn Guo]

On Mon, Oct 16, 2017 at 10:48:26AM -0200, Marco Franchi wrote:
> The following build warning is seen with W=1:
> 
> Warning (unit_address_vs_reg): Node /display-di0/port at 0 has a unit name, but no reg property
> 
> Fix this warning by removing '@' from such node.
> 
> Signed-off-by: Marco Franchi <marco.franchi@nxp.com>

This patch and #6 do not apply to imx/dt branch.  Please rebase.

Shawn

[PATCH 3/6] ARM: dts: imx53: Fix 'usbphy@x' node with unit name and no reg property

[Marco Franchi]

The following build warnings are seen with W=1:

Warning (unit_address_vs_reg): Node /soc/aips at 50000000/usbphy at 0 has a unit
name, but no reg property
Warning (unit_address_vs_reg): Node /soc/aips at 50000000/usbphy at 1 has a unit
name, but no reg property

Fix these warnings by changing '@' to '-'.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
---
 arch/arm/boot/dts/imx53.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 8bf0d89..c937949 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -299,14 +299,14 @@
 				reg = <0x53f00000 0x60>;
 			};
 
-			usbphy0: usbphy at 0 {
+			usbphy0: usbphy-0 {
 				compatible = "usb-nop-xceiv";
 				clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
 				clock-names = "main_clk";
 				status = "okay";
 			};
 
-			usbphy1: usbphy at 1 {
+			usbphy1: usbphy-1 {
 				compatible = "usb-nop-xceiv";
 				clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
 				clock-names = "main_clk";
-- 
2.7.4

[PATCH 4/6] ARM: dts: imx53-m53evk: Fix 'led_gpio@0' node with unit name and no reg property

[Marco Franchi]

The following build warning is seen with W=1:

Warning (unit_address_vs_reg): Node /soc/aips at 50000000/iomuxc at 53fa8000/
imx53-m53evk/led_gpio at 0 has a unit name, but no reg property

Fix this warning by removing '@0' from such node.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
---
 arch/arm/boot/dts/imx53-m53evk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index 4347a32..c2cefe2 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -183,7 +183,7 @@
 			>;
 		};
 
-		led_pin_gpio: led_gpio at 0 {
+		led_pin_gpio: led_gpio {
 			fsl,pins = <
 				MX53_PAD_PATA_DATA8__GPIO2_8		0x80000000
 				MX53_PAD_PATA_DATA9__GPIO2_9		0x80000000
-- 
2.7.4

[PATCH 5/6] ARM: dts: imx53-qsb-common: Fix 'led_gpio7_7@0' node with unit name and no reg property

[Marco Franchi]

The following build warning is seen with W=1:

Warning (unit_address_vs_reg): Node /soc/aips at 50000000/iomuxc at 53fa8000/
imx53-qsb/led_gpio7_7 at 0 has a unit name, but no reg property

Fix this warning by removing '@0' from such node.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
---
 arch/arm/boot/dts/imx53-qsb-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 683dcbe..d214e1f 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -172,7 +172,7 @@
 			>;
 		};
 
-		led_pin_gpio7_7: led_gpio7_7 at 0 {
+		led_pin_gpio7_7: led_gpio7_7 {
 			fsl,pins = <
 				MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
 			>;
-- 
2.7.4

[PATCH 6/6] ARM: dts: imx53-tx53: Fix 'ethernet-phy@0' node with unit name and no reg property

[Marco Franchi]

The following build warning is seen with W=1:

Warning (unit_address_vs_reg): Node /soc/aips at 60000000/ethernet at 63fec000/
ethernet-phy at 0 has a unit name, but no reg property

Fix this warning by removing '@' from such node.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
---
 arch/arm/boot/dts/imx53-tx53.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 7807c1f..27a1aee 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -206,7 +206,7 @@
 	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
 	status = "okay";
 
-	phy0: ethernet-phy at 0 {
+	phy0: ethernet-phy {
 		interrupt-parent = <&gpio2>;
 		interrupts = <4>;
 		device_type = "ethernet-phy";
-- 
2.7.4