* [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series
@ 2017-10-17 8:53 Lothar Waßmann
2017-10-17 8:53 ` [PATCH 01/12] ARM: dts: imx6-tx6: update model property to match current module HW revision Lothar Waßmann
` (12 more replies)
0 siblings, 13 replies; 27+ messages in thread
From: Lothar Waßmann @ 2017-10-17 8:53 UTC (permalink / raw)
To: linux-arm-kernel
This patchset updates the dts files for the Ka-Ro electronics GmbH TX6
module series and adds some include files to facilitate supporting
various SoM/baseboard combinations.
Changes vs. v1:
- rebased to imx/dt branch
- eliminate use of 'interrupts-extended' property according to Uwe
Kleine-K?nig's comment
^ permalink raw reply [flat|nested] 27+ messages in thread* [PATCH 01/12] ARM: dts: imx6-tx6: update model property to match current module HW revision 2017-10-17 8:53 [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann @ 2017-10-17 8:53 ` Lothar Waßmann 2017-10-17 8:53 ` [PATCH 02/12] ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts Lothar Waßmann ` (11 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 8:53 UTC (permalink / raw) To: linux-arm-kernel The current TX6Q module HW revision is 3 reflected in the module name suffix '-1030' (-1130 for LVDS). Change the model string to prevent confusion about what DTS file to use for these modules. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6q-tx6q-1010.dts | 4 ++-- arch/arm/boot/dts/imx6q-tx6q-1110.dts | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts index e14e6be..17ff7e7 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -44,7 +44,7 @@ #include "imx6qdl-tx6.dtsi" / { - model = "Ka-Ro electronics TX6Q-1010 Module"; + model = "Ka-Ro electronics TX6Q-1010/-1030 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; aliases { diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts index 0433e22..0f5e638 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -44,7 +44,7 @@ #include "imx6qdl-tx6.dtsi" / { - model = "Ka-Ro electronics TX6Q-1110 Module"; + model = "Ka-Ro electronics TX6Q-1110/-1130 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; aliases { -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 02/12] ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts 2017-10-17 8:53 [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann 2017-10-17 8:53 ` [PATCH 01/12] ARM: dts: imx6-tx6: update model property to match current module HW revision Lothar Waßmann @ 2017-10-17 8:53 ` Lothar Waßmann 2017-10-17 8:53 ` [PATCH 03/12] ARM: dts: imx6-tx6: remove obsolete ipu1 alias Lothar Waßmann ` (10 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 8:53 UTC (permalink / raw) To: linux-arm-kernel The display, that incorporates this touchpanel is obsolete and won't be supported any more. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6dl-tx6u-811x.dts | 23 +---------------------- arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts | 22 +--------------------- arch/arm/boot/dts/imx6q-tx6q-1110.dts | 21 --------------------- arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts | 22 +--------------------- 4 files changed, 3 insertions(+), 85 deletions(-) diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts index 5e0c6bb..f0f759a 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -98,19 +98,6 @@ }; }; -&i2c3 { - polytouch2: eeti at 04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti>; - interrupt-parent = <&gpio3>; - interrupts = <22 0>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; -}; - &kpp { status = "disabled"; /* pad conflict with backlight1 PWM */ }; @@ -168,11 +155,3 @@ &pwm1 { status = "okay"; }; - -&iomuxc { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts index b9a783f..c817324 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts @@ -1,5 +1,5 @@ /* - * Copyright 2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2016-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -106,18 +106,6 @@ xceiver-supply = <®_3v3>; }; -&i2c3 { - polytouch1: eeti at 04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti>; - interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; -}; - &kpp { status = "disabled"; /* pads partially clash with backlight1 PWM */ }; @@ -245,11 +233,3 @@ &pwm1 { status = "okay"; }; - -&iomuxc { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts index 0f5e638..900557d 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts @@ -98,19 +98,6 @@ }; }; -&i2c3 { - polytouch1: eeti at 04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti>; - interrupt-parent = <&gpio3>; - interrupts = <22 0>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; -}; - &kpp { status = "disabled"; /* pad conflict with backlight1 PWM */ }; @@ -172,11 +159,3 @@ &sata { status = "okay"; }; - -&iomuxc { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts index d78b129..6b42c44 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts @@ -1,5 +1,5 @@ /* - * Copyright 2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2016-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -107,18 +107,6 @@ xceiver-supply = <®_3v3>; }; -&i2c3 { - polytouch1: eeti at 04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti>; - interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; -}; - &ipu2 { status = "disabled"; }; @@ -254,11 +242,3 @@ &sata { status = "okay"; }; - -&iomuxc { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; -}; -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 03/12] ARM: dts: imx6-tx6: remove obsolete ipu1 alias 2017-10-17 8:53 [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann 2017-10-17 8:53 ` [PATCH 01/12] ARM: dts: imx6-tx6: update model property to match current module HW revision Lothar Waßmann 2017-10-17 8:53 ` [PATCH 02/12] ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts Lothar Waßmann @ 2017-10-17 8:53 ` Lothar Waßmann 2017-10-17 8:53 ` [PATCH 04/12] ARM: dts: imx6-tx6: add trickle-charge config for DS1339 Lothar Waßmann ` (9 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 8:53 UTC (permalink / raw) To: linux-arm-kernel The 'ipu1' alias is already defined in imx6q.dtsi. There is no need to redefine it here. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts index 6b42c44..be9233d 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts @@ -49,7 +49,6 @@ aliases { display = &lvds0; - ipu1 = &ipu2; lvds0 = &lvds0; lvds1 = &lvds1; }; -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 04/12] ARM: dts: imx6-tx6: add trickle-charge config for DS1339 2017-10-17 8:53 [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (2 preceding siblings ...) 2017-10-17 8:53 ` [PATCH 03/12] ARM: dts: imx6-tx6: remove obsolete ipu1 alias Lothar Waßmann @ 2017-10-17 8:53 ` Lothar Waßmann 2017-10-17 8:53 ` [PATCH 05/12] ARM: dts: imx6-tx6: improve ethernet related pinctrl setup Lothar Waßmann ` (8 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 8:53 UTC (permalink / raw) To: linux-arm-kernel As the DS1339 driver now supports enabling the trickle charge feature via DTB, add the appropriate properties to utilize this feature. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index c6bec97..a50bf71 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -284,6 +284,8 @@ ds1339: rtc at 68 { compatible = "dallas,ds1339"; reg = <0x68>; + trickle-resistor-ohms = <250>; + trickle-diode-disable; }; }; -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 05/12] ARM: dts: imx6-tx6: improve ethernet related pinctrl setup 2017-10-17 8:53 [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (3 preceding siblings ...) 2017-10-17 8:53 ` [PATCH 04/12] ARM: dts: imx6-tx6: add trickle-charge config for DS1339 Lothar Waßmann @ 2017-10-17 8:53 ` Lothar Waßmann 2017-10-17 8:53 ` [PATCH 06/12] ARM: dts: imx6-tx6: specify ethernet phy reset post-delay Lothar Waßmann ` (7 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 8:53 UTC (permalink / raw) To: linux-arm-kernel Remove the PHY INT and RESET pins from hog section and put them into their own pinctrl nodes referenced by the appropriate driver nodes. Also, the MDIO pins are required for probing the Ethernet PHY, so they must be configured by the FEC driver, not by the PHY driver. Move the corresponding pinctrl settings from the PHY subnode to the FEC node. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index a50bf71..aa32956 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -241,7 +241,7 @@ &fec { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; + pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>; clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET_REF>, @@ -261,7 +261,7 @@ compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_mdio>; + pinctrl-0 = <&pinctrl_etnphy_int>; interrupts-extended = <&gpio7 1 IRQ_TYPE_EDGE_FALLING>; }; }; @@ -334,8 +334,6 @@ pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */ >; }; @@ -453,12 +451,24 @@ >; }; + pinctrl_etnphy_int: etnphy-intgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */ + >; + }; + pinctrl_etnphy_power: etnphy-pwrgrp { fsl,pins = < MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */ >; }; + pinctrl_etnphy_rst: etnphy-rstgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ + >; + }; + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 06/12] ARM: dts: imx6-tx6: specify ethernet phy reset post-delay 2017-10-17 8:53 [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (4 preceding siblings ...) 2017-10-17 8:53 ` [PATCH 05/12] ARM: dts: imx6-tx6: improve ethernet related pinctrl setup Lothar Waßmann @ 2017-10-17 8:53 ` Lothar Waßmann 2017-10-17 8:53 ` [PATCH 07/12] ARM: dts: imx6-tx6: convert to using simple-audio-card Lothar Waßmann ` (6 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 8:53 UTC (permalink / raw) To: linux-arm-kernel Under certain circumstances the ethernet PHY cannot be detected on Ka-Ro electronics TX6 modules. Using a phy-reset-post-delay of at least 2ms alleviates this problem. Define it to 10ms to be on the safe side. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index aa32956..c6b2d63 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -249,6 +249,7 @@ clock-names = "ipg", "ahb", "ptp", "enet_out"; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; + phy-reset-post-delay = <10>; phy-handle = <&etnphy>; phy-supply = <®_3v3_etn>; status = "okay"; -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 07/12] ARM: dts: imx6-tx6: convert to using simple-audio-card 2017-10-17 8:53 [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (5 preceding siblings ...) 2017-10-17 8:53 ` [PATCH 06/12] ARM: dts: imx6-tx6: specify ethernet phy reset post-delay Lothar Waßmann @ 2017-10-17 8:53 ` Lothar Waßmann 2017-10-17 8:53 ` [PATCH 08/12] ARM: dts: imx6-tx6: add support for I2C bus recovery Lothar Waßmann ` (5 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 8:53 UTC (permalink / raw) To: linux-arm-kernel Convert the DTS sound setup to use the simple-audio-card driver. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 50 ++++++++++++++++++++++++++++++++------ 1 file changed, 42 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index c6b2d63..e0dbf8b 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -43,6 +43,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> / { aliases { @@ -183,24 +184,56 @@ }; sound { - compatible = "karo,imx6qdl-tx6qdl-sgtl5000", - "fsl,imx-audio-sgtl5000"; - model = "sgtl5000-audio"; + compatible = "karo,imx6qdl-tx6-sgtl5000", + "simple-audio-card"; + simple-audio-card,name = "imx6qdl-tx6-sgtl5000-audio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; - ssi-controller = <&ssi1>; - audio-codec = <&sgtl5000>; - audio-routing = + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", "Headphone Jack", "HP_OUT"; - mux-int-port = <1>; - mux-ext-port = <5>; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; }; }; &audmux { status = "okay"; + + ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSEL(4) | + IMX_AUDMUX_V2_PTCR_TCSEL(4) | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(4) + >; + }; + + pins5 { + fsl,audmux-port = <4>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(0) + >; + }; }; &can1 { @@ -298,6 +331,7 @@ sgtl5000: sgtl5000 at 0a { compatible = "fsl,sgtl5000"; + #sound-dai-cells = <0>; reg = <0x0a>; VDDA-supply = <®_2v5>; VDDIO-supply = <®_3v3>; -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 08/12] ARM: dts: imx6-tx6: add support for I2C bus recovery 2017-10-17 8:53 [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (6 preceding siblings ...) 2017-10-17 8:53 ` [PATCH 07/12] ARM: dts: imx6-tx6: convert to using simple-audio-card Lothar Waßmann @ 2017-10-17 8:53 ` Lothar Waßmann 2017-10-17 8:53 ` [PATCH 09/12] ARM: dts: imx6-tx6: move display configuration to .dtsi file Lothar Waßmann ` (4 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 8:53 UTC (permalink / raw) To: linux-arm-kernel Define the required properties to enable I2C bus recovery supported by the I2C subsystem. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index e0dbf8b..9b563d4 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -310,8 +310,11 @@ }; &i2c1 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; clock-frequency = <400000>; status = "okay"; @@ -324,8 +327,11 @@ }; &i2c3 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; clock-frequency = <400000>; status = "okay"; @@ -551,6 +557,13 @@ >; }; + pinctrl_i2c1_gpio: i2c1-gpiogrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1 + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1 + >; + }; + pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 @@ -558,6 +571,13 @@ >; }; + pinctrl_i2c3_gpio: i2c3-gpiogrp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 + >; + }; + pinctrl_kpp: kppgrp { fsl,pins = < MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1 -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 09/12] ARM: dts: imx6-tx6: move display configuration to .dtsi file 2017-10-17 8:53 [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (7 preceding siblings ...) 2017-10-17 8:53 ` [PATCH 08/12] ARM: dts: imx6-tx6: add support for I2C bus recovery Lothar Waßmann @ 2017-10-17 8:53 ` Lothar Waßmann 2017-10-17 8:53 ` [PATCH 10/12] ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard Lothar Waßmann ` (3 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 8:53 UTC (permalink / raw) To: linux-arm-kernel Currently the display (LCD or LVDS) configuration is duplicated with slight variations in each TX6 module specific file. Move it to an include file for simplification and consistency. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts | 74 +------ arch/arm/boot/dts/imx6dl-tx6s-8034.dts | 171 +--------------- arch/arm/boot/dts/imx6dl-tx6s-8035.dts | 171 +--------------- arch/arm/boot/dts/imx6dl-tx6u-801x.dts | 161 +-------------- arch/arm/boot/dts/imx6dl-tx6u-8033.dts | 170 +--------------- arch/arm/boot/dts/imx6dl-tx6u-811x.dts | 109 +--------- arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts | 185 +---------------- arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts | 74 +------ arch/arm/boot/dts/imx6q-tx6q-1010.dts | 159 +-------------- arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts | 74 +------ arch/arm/boot/dts/imx6q-tx6q-1020.dts | 162 +-------------- arch/arm/boot/dts/imx6q-tx6q-1036.dts | 170 +--------------- arch/arm/boot/dts/imx6q-tx6q-1110.dts | 109 +--------- arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts | 187 ++---------------- arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi | 252 +++++++++++++++++++++++ arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi | 286 +++++++++++++++++++++++++++ arch/arm/boot/dts/imx6qdl-tx6.dtsi | 4 +- 17 files changed, 616 insertions(+), 1902 deletions(-) create mode 100644 arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi create mode 100644 arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts index 389fc16..51a9bb9 100644 --- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts +++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,70 +42,16 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6DL Module on CoMpact TFT"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; +}; - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&ET070001DM6>; - - ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; +&backlight { + pwms = <&pwm2 0 500000 0>; + /delete-property/ turn-on-delay-ms; }; &can1 { @@ -116,14 +62,14 @@ xceiver-supply = <®_3v3>; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - &kpp { status = "disabled"; }; +&lcd_panel { + compatible = "edt,etm0700g0edh6"; +}; + ®_can_xcvr { status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts index a21075b..9eb2ef1 100644 --- a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts +++ b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts @@ -1,5 +1,5 @@ /* - * Copyright 2015-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2015-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,174 +42,15 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6S-8034 Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - aliases { - display = &display; - ipu1 = &ipu1; - }; - cpus { /delete-node/ cpu at 1; }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_2>; - interface-pix-fmt = "rgb24"; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&vga>; - - vga: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -227,11 +68,3 @@ MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */ >; }; - -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - -®_lcd0_pwr { - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts index fee8854..a5532ec 100644 --- a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts +++ b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts @@ -1,5 +1,5 @@ /* - * Copyright 2015-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2015-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,174 +42,15 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6S-8035 Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - aliases { - display = &display; - ipu1 = &ipu1; - }; - cpus { /delete-node/ cpu at 1; }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_2>; - interface-pix-fmt = "rgb24"; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&vga>; - - vga: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -220,14 +61,6 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - -®_lcd0_pwr { - status = "disabled"; -}; - &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts index efe5772..67ed045 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,166 +42,9 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6U-801x Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; - -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; }; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts index e222086..7030b26 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,169 +42,11 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6U-8033 Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_2>; - interface-pix-fmt = "rgb24"; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&vga>; - - vga: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -215,14 +57,6 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - -®_lcd0_pwr { - status = "disabled"; -}; - &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts index f0f759a..5342f2f 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts @@ -42,116 +42,9 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lvds.dtsi" / { model = "Ka-Ro electronics TX6U-811x Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - - aliases { - display = &lvds0; - lvds0 = &lvds0; - lvds1 = &lvds1; - }; - - backlight0: backlight0 { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_lcd0_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - backlight1: backlight1 { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 500000 0>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; -}; - -&kpp { - status = "disabled"; /* pad conflict with backlight1 PWM */ -}; - -&ldb { - status = "okay"; - - lvds0: lvds-channel at 0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds_timing0>; - lvds_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - - lvds1: lvds-channel at 1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "disabled"; - - display-timings { - native-mode = <&lvds_timing1>; - lvds_timing1: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; -}; - -&pwm1 { - status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts index c817324..e43ff12 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts @@ -42,60 +42,21 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lvds.dtsi" / { model = "Ka-Ro electronics TX6U-81xx Module on MB7 baseboard"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; +}; - aliases { - display = &lvds0; - lvds0 = &lvds0; - lvds1 = &lvds1; - }; - - backlight0: backlight0 { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_lcd0_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; +&backlight0 { + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + turn-on-delay-ms = <35>; +}; - backlight1: backlight1 { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; +&backlight1 { + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + turn-on-delay-ms = <35>; }; &can1 { @@ -105,131 +66,3 @@ &can2 { xceiver-supply = <®_3v3>; }; - -&kpp { - status = "disabled"; /* pads partially clash with backlight1 PWM */ -}; - -&ldb { - status = "okay"; - - lvds0: lvds-channel at 0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds0_timing1>; - - lvds0_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - lvds0_timing1: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hfront-porch = <16>; - vback-porch = <31>; - vfront-porch = <12>; - hsync-len = <96>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - lvds0_timing2: nl12880bc20 { - clock-frequency = <71000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <50>; - hfront-porch = <50>; - vback-porch = <5>; - vfront-porch = <5>; - hsync-len = <60>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - - lvds1: lvds-channel at 1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds1_timing2>; - - lvds1_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - lvds1_timing1: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hfront-porch = <16>; - vback-porch = <31>; - vfront-porch = <12>; - hsync-len = <96>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - lvds1_timing2: nl12880bc20 { - clock-frequency = <71000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <50>; - hfront-porch = <50>; - vback-porch = <5>; - vfront-porch = <5>; - hsync-len = <60>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; -}; - -&pwm1 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts index d3ee1f5..ac3050a 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,70 +42,16 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; +}; - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&ET070001DM6>; - - ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; +&backlight { + pwms = <&pwm2 0 500000 0>; + /delete-property/ turn-on-delay-ms; }; &can1 { @@ -116,14 +62,14 @@ xceiver-supply = <®_3v3>; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - &kpp { status = "disabled"; }; +&lcd_panel { + compatible = "edt,etm0700g0edh6"; +}; + ®_can_xcvr { status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts index 17ff7e7..4ee860b 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts @@ -42,166 +42,13 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1010/-1030 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; +&ipu2 { + status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts index ea84561..a773f25 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,70 +42,16 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; +}; - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&ET070001DM6>; - - ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; +&backlight { + pwms = <&pwm2 0 500000 0>; + /delete-property/ turn-on-delay-ms; }; &can1 { @@ -124,14 +70,14 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - &kpp { status = "disabled"; }; +&lcd_panel { + compatible = "edt,etm0700g0edh6"; +}; + ®_can_xcvr { status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts index 9c168ee..0a4daec 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,164 +42,11 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1020 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -210,14 +57,15 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; +&ipu2 { + status = "disabled"; }; &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <4>; + non-removable; no-1-8-v; fsl,wp-controller; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/imx6q-tx6q-1036.dts index c81e8bd..cb2fcb4 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1036.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1036.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,169 +42,11 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1036 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_2>; - interface-pix-fmt = "rgb24"; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&vga>; - - vga: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -215,18 +57,10 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - &ipu2 { status = "disabled"; }; -®_lcd0_pwr { - status = "disabled"; -}; - &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts index 900557d..f7b0acb 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts @@ -42,118 +42,15 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lvds.dtsi" / { model = "Ka-Ro electronics TX6Q-1110/-1130 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &lvds0; - lvds0 = &lvds0; - lvds1 = &lvds1; - }; - - backlight0: backlight0 { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_lcd0_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - backlight1: backlight1 { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 500000 0>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; }; -&kpp { - status = "disabled"; /* pad conflict with backlight1 PWM */ -}; - -&ldb { - status = "okay"; - - lvds0: lvds-channel at 0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds_timing0>; - lvds_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - - lvds1: lvds-channel at 1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "disabled"; - - display-timings { - native-mode = <&lvds_timing1>; - lvds_timing1: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; -}; - -&pwm1 { - status = "okay"; +&ipu2 { + status = "disabled"; }; &sata { diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts index be9233d..9648c21 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts @@ -42,60 +42,23 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lvds.dtsi" / { model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; +}; - aliases { - display = &lvds0; - lvds0 = &lvds0; - lvds1 = &lvds1; - }; - - backlight0: backlight0 { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_lcd0_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; +&backlight0 { + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + turn-on-delay-ms = <35>; + power-supply = <®_lcd1_pwr>; +}; - backlight1: backlight1 { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; +&backlight1 { + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + turn-on-delay-ms = <35>; + power-supply = <®_lcd1_pwr>; }; &can1 { @@ -110,132 +73,12 @@ status = "disabled"; }; -&kpp { - status = "disabled"; /* pads partially clash with backlight1 PWM */ +&lvds0_panel { + compatible = "edt,et057090dhu"; }; -&ldb { - status = "okay"; - - lvds0: lvds-channel at 0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds0_timing1>; - - lvds0_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - lvds0_timing1: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hfront-porch = <16>; - vback-porch = <31>; - vfront-porch = <12>; - hsync-len = <96>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - lvds0_timing2: nl12880bc20 { - clock-frequency = <71000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <50>; - hfront-porch = <50>; - vback-porch = <5>; - vfront-porch = <5>; - hsync-len = <60>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - - lvds1: lvds-channel at 1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds1_timing2>; - - lvds1_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - lvds1_timing1: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hfront-porch = <16>; - vback-porch = <31>; - vfront-porch = <12>; - hsync-len = <96>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - lvds1_timing2: nl12880bc20 { - clock-frequency = <71000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <50>; - hfront-porch = <50>; - vback-porch = <5>; - vfront-porch = <5>; - hsync-len = <60>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; -}; - -&pwm1 { - status = "okay"; +&lvds1_panel { + compatible = "edt,et057090dhu"; }; &sata { diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi new file mode 100644 index 0000000..5102fc4 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi @@ -0,0 +1,252 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd1_pwr>; + enable-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + turn-on-delay-ms = <35>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + lcd_panel: lcd-panel { + compatible = "edt,etm0700g0dh6"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + backlight = <&backlight>; + bus-format-override = "rgb24"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_out>; + }; + }; + }; + + display: disp0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port at 0 { + reg = <0>; + + lcd_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port at 1 { + reg = <1>; + + lcd_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + + display-timings { + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + u-boot,panel-name = "edt,et057090dhu"; + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + u-boot,panel-name = "edt,et0350g0dh6"; + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + u-boot,panel-name = "edt,et0430g0dh6"; + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + u-boot,panel-name = "edt,etm0700g0dh6"; + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + CoMTFT { /* same as ET0700 but with inverted pixel clock */ + u-boot,panel-name = "edt,etm0700g0edh6"; + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_in>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi new file mode 100644 index 0000000..2ca2eb3 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi @@ -0,0 +1,286 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + aliases { + display = &lvds0; + lvds0 = &lvds0; + lvds1 = &lvds1; + }; + + backlight0: backlight0 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 0>; + power-supply = <®_lcd0_pwr>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + backlight1: backlight1 { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 0>; + power-supply = <®_lcd1_pwr>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + lvds0_panel: lvds0-panel { + compatible = "nlt,nl12880bc20-spwg-24"; + backlight = <&backlight0>; + power-supply = <®_3v3>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + lvds1_panel: lvds1-panel { + compatible = "nlt,nl12880bc20-spwg-24"; + backlight = <&backlight1>; + power-supply = <®_3v3>; + + port { + panel_in_lvds1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; +}; + +&kpp { + status = "disabled"; /* pad conflict with backlight1 PWM */ +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel at 0 { + fsl,data-width = <18>; + status = "okay"; + + port at 4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + + display-timings { + hsd100pxn1 { + u-boot,panel-name = "hannstar,hsd100pxn1"; + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hfront-porch = <16>; + vback-porch = <31>; + vfront-porch = <12>; + hsync-len = <96>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + nl12880bc20 { + u-boot,panel-name = "nlt,nl12880bc20-spwg-24"; + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <50>; + hfront-porch = <50>; + vback-porch = <5>; + vfront-porch = <5>; + hsync-len = <60>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0700 { + u-boot,panel-name = "edt,etm0700g0dh6"; + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + u-boot,panel-name = "edt,et057090dhu"; + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; + + lvds1: lvds-channel at 1 { + fsl,data-width = <18>; + status = "okay"; + + port at 4 { + reg = <4>; + + lvds1_out: endpoint { + remote-endpoint = <&panel_in_lvds1>; + }; + }; + + display-timings { + hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hfront-porch = <16>; + vback-porch = <31>; + vfront-porch = <12>; + hsync-len = <96>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + nl12880bc20 { + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <50>; + hfront-porch = <50>; + vback-porch = <5>; + vfront-porch = <5>; + hsync-len = <60>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +®_lcd0_pwr { + status = "okay"; +}; + +®_lcd1_pwr { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index 9b563d4..015757c 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -146,7 +146,7 @@ pinctrl-0 = <&pinctrl_lcd0_pwr>; gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-boot-on; + status = "disabled"; }; reg_lcd1_pwr: regulator-lcd1-pwr { @@ -158,7 +158,7 @@ pinctrl-0 = <&pinctrl_lcd1_pwr>; gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-boot-on; + status = "disabled"; }; reg_usbh1_vbus: regulator-usbh1-vbus { -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 10/12] ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard 2017-10-17 8:53 [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (8 preceding siblings ...) 2017-10-17 8:53 ` [PATCH 09/12] ARM: dts: imx6-tx6: move display configuration to .dtsi file Lothar Waßmann @ 2017-10-17 8:53 ` Lothar Waßmann 2017-10-17 8:53 ` [PATCH 11/12] ARM: dts: imx: add support for TX6QP Lothar Waßmann ` (2 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 8:53 UTC (permalink / raw) To: linux-arm-kernel Move the MB7 specific settings to a separate .dtsi file to facilitate supporting more module variants with this baseboard. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts | 9 +-- arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts | 42 +------------ arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi | 99 ++++++++++++++++++++++++++++++ 3 files changed, 102 insertions(+), 48 deletions(-) create mode 100644 arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts index e43ff12..21eaec9 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts @@ -43,6 +43,7 @@ #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" #include "imx6qdl-tx6-lvds.dtsi" +#include "imx6qdl-tx6-mb7.dtsi" / { model = "Ka-Ro electronics TX6U-81xx Module on MB7 baseboard"; @@ -58,11 +59,3 @@ pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; turn-on-delay-ms = <35>; }; - -&can1 { - status = "disabled"; -}; - -&can2 { - xceiver-supply = <®_3v3>; -}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts index 9648c21..387edf2 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts @@ -40,47 +40,9 @@ */ /dts-v1/; -#include "imx6q.dtsi" -#include "imx6qdl-tx6.dtsi" -#include "imx6qdl-tx6-lvds.dtsi" +#include "imx6q-tx6q-1110.dts" +#include "imx6qdl-tx6-mb7.dtsi" / { model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard"; - compatible = "karo,imx6q-tx6q", "fsl,imx6q"; -}; - -&backlight0 { - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - turn-on-delay-ms = <35>; - power-supply = <®_lcd1_pwr>; -}; - -&backlight1 { - pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; - turn-on-delay-ms = <35>; - power-supply = <®_lcd1_pwr>; -}; - -&can1 { - status = "disabled"; -}; - -&can2 { - xceiver-supply = <®_3v3>; -}; - -&ipu2 { - status = "disabled"; -}; - -&lvds0_panel { - compatible = "edt,et057090dhu"; -}; - -&lvds1_panel { - compatible = "edt,et057090dhu"; -}; - -&sata { - status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi new file mode 100644 index 0000000..4c4e2e1 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi @@ -0,0 +1,99 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + backlight0 { + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + turn-on-delay-ms = <35>; + power-supply = <®_lcd1_pwr>; + }; + + backlight1 { + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + turn-on-delay-ms = <35>; + power-supply = <®_lcd1_pwr>; + }; + + lcd-panel { + compatible = "edt,et057090dhu"; + bus-format-override = "rgb24"; + pixelclk-active = <0>; + }; + + lvds0-panel { + compatible = "edt,etml1010g0dka"; + bus-format-override = "spwg-18"; + pixelclk-active = <0>; + }; + + lvds1-panel { + compatible = "edt,etml1010g0dka"; + bus-format-override = "spwg-18"; + pixelclk-active = <0>; + }; +}; + +&can1 { + status = "disabled"; +}; + +&can2 { + xceiver-supply = <®_3v3>; +}; + +&ds1339 { + /* + * The backup voltage of the module internal RTC is not wired + * by default on the MB7, so disable that RTC chip. + */ + status = "disabled"; +}; + +&i2c3 { + rtc: mcp7940x at 6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + }; +}; + +®_lcd0_pwr { + status = "disabled"; +}; -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 11/12] ARM: dts: imx: add support for TX6QP 2017-10-17 8:53 [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (9 preceding siblings ...) 2017-10-17 8:53 ` [PATCH 10/12] ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard Lothar Waßmann @ 2017-10-17 8:53 ` Lothar Waßmann 2017-10-17 8:53 ` [PATCH 12/12] ARM: dts: imx: add support for TX6 modules on MB7 baseboard Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 8:53 UTC (permalink / raw) To: linux-arm-kernel The TX6QP-8037 is a Computer On Module manufactured by Ka-Ro electronics GmbH with the following characteristics: Processor Freescale i.MX 6QuadPlus MCIMX6QP7, 1 GHz RAM 1GiB 64-bit DDR3 SDRAM ROM 4GB HiRel eMMC Power supply Single 3.3 to 5V Size 26mm SO-DIMM Temp. Range -40?C to 105?C Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx6qp-tx6qp-8037.dts | 86 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6qp-tx6qp-8137.dts | 90 +++++++++++++++++++++++++++++++++ 3 files changed, 178 insertions(+) create mode 100644 arch/arm/boot/dts/imx6qp-tx6qp-8037.dts create mode 100644 arch/arm/boot/dts/imx6qp-tx6qp-8137.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 946a4b1..add34d1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -462,6 +462,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6qp-nitrogen6_som2.dtb \ imx6qp-sabreauto.dtb \ imx6qp-sabresd.dtb \ + imx6qp-tx6qp-8037.dtb \ + imx6qp-tx6qp-8137.dtb \ imx6qp-wandboard-revd1.dtb \ imx6qp-zii-rdu2.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts new file mode 100644 index 0000000..ffc0f2e --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts @@ -0,0 +1,86 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6qp.dtsi" +#include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" + +/ { + model = "Ka-Ro electronics TX6QP-8037 Module"; + compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp"; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&ipu2 { + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + non-removable; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts new file mode 100644 index 0000000..dd494d5 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts @@ -0,0 +1,90 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6qp.dtsi" +#include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lvds.dtsi" + +/ { + model = "Ka-Ro electronics TX6QP-8137 Module"; + compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp"; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&ipu2 { + status = "disabled"; +}; + +&sata { + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + non-removable; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; +}; -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 12/12] ARM: dts: imx: add support for TX6 modules on MB7 baseboard 2017-10-17 8:53 [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (10 preceding siblings ...) 2017-10-17 8:53 ` [PATCH 11/12] ARM: dts: imx: add support for TX6QP Lothar Waßmann @ 2017-10-17 8:53 ` Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 8:53 UTC (permalink / raw) To: linux-arm-kernel Create .dts files for various Ka-Ro electronics TX modules on the MB7 baseboard. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/Makefile | 8 ++++ arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts | 48 ++++++++++++++++++++++++ arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts | 48 ++++++++++++++++++++++++ arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts | 48 ++++++++++++++++++++++++ arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts | 48 ++++++++++++++++++++++++ arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts | 17 +-------- arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts | 48 ++++++++++++++++++++++++ arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts | 48 ++++++++++++++++++++++++ arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts | 48 ++++++++++++++++++++++++ arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts | 57 +++++++++++++++++++++++++++++ 10 files changed, 403 insertions(+), 15 deletions(-) create mode 100644 arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts create mode 100644 arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts create mode 100644 arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts create mode 100644 arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts create mode 100644 arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index add34d1..79226b7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -389,9 +389,13 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-ts4900.dtb \ imx6dl-tx6dl-comtft.dtb \ imx6dl-tx6s-8034.dtb \ + imx6dl-tx6s-8034-mb7.dtb \ imx6dl-tx6s-8035.dtb \ + imx6dl-tx6s-8035-mb7.dtb \ imx6dl-tx6u-801x.dtb \ + imx6dl-tx6u-80xx-mb7.dtb \ imx6dl-tx6u-8033.dtb \ + imx6dl-tx6u-8033-mb7.dtb \ imx6dl-tx6u-811x.dtb \ imx6dl-tx6u-81xx-mb7.dtb \ imx6dl-udoo.dtb \ @@ -450,6 +454,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-tx6q-1020.dtb \ imx6q-tx6q-1020-comtft.dtb \ imx6q-tx6q-1036.dtb \ + imx6q-tx6q-1036-mb7.dtb \ + imx6q-tx6q-10x0-mb7.dtb \ imx6q-tx6q-1110.dtb \ imx6q-tx6q-11x0-mb7.dtb \ imx6q-udoo.dtb \ @@ -463,7 +469,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6qp-sabreauto.dtb \ imx6qp-sabresd.dtb \ imx6qp-tx6qp-8037.dtb \ + imx6qp-tx6qp-8037-mb7.dtb \ imx6qp-tx6qp-8137.dtb \ + imx6qp-tx6qp-8137-mb7.dtb \ imx6qp-wandboard-revd1.dtb \ imx6qp-zii-rdu2.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts new file mode 100644 index 0000000..fc23b4d --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl-tx6s-8034.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6S-8034 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts new file mode 100644 index 0000000..4101c65 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl-tx6s-8035.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-8035 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts new file mode 100644 index 0000000..d34189f --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl-tx6u-8033.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-8033 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts new file mode 100644 index 0000000..aef5fcc --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl-tx6u-801x.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-8030/-8010/-8012 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts index 21eaec9..c4588fb 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts @@ -40,22 +40,9 @@ */ /dts-v1/; -#include "imx6dl.dtsi" -#include "imx6qdl-tx6.dtsi" -#include "imx6qdl-tx6-lvds.dtsi" +#include "imx6dl-tx6u-811x.dts" #include "imx6qdl-tx6-mb7.dtsi" / { - model = "Ka-Ro electronics TX6U-81xx Module on MB7 baseboard"; - compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; -}; - -&backlight0 { - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - turn-on-delay-ms = <35>; -}; - -&backlight1 { - pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; - turn-on-delay-ms = <35>; + model = "Ka-Ro electronics TX6U-8130/-8110 Module on MB7 baseboard"; }; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts new file mode 100644 index 0000000..9ffbb0fe7 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q-tx6q-1036.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1036 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts new file mode 100644 index 0000000..d43a5d8 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q-tx6q-1010.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1010/-1030 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts new file mode 100644 index 0000000..92b38e6 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6qp-tx6qp-8037.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-8037 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts new file mode 100644 index 0000000..07ad707 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts @@ -0,0 +1,57 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6qp-tx6qp-8137.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-8137 Module on MB7 baseboard"; + compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp"; +}; + +&ipu2 { + status = "disabled"; +}; + +&sata { + status = "okay"; +}; -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series 2017-10-17 8:53 [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (11 preceding siblings ...) 2017-10-17 8:53 ` [PATCH 12/12] ARM: dts: imx: add support for TX6 modules on MB7 baseboard Lothar Waßmann @ 2017-10-17 9:17 ` Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 01/12] ARM: dts: imx6-tx6: update model property to match current module HW revision Lothar Waßmann ` (12 more replies) 12 siblings, 13 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 9:17 UTC (permalink / raw) To: linux-arm-kernel Please ignore the V2 series. I accidentally sent the patches from a wrong directory. This patchset updates the dts files for the Ka-Ro electronics GmbH TX6 module series and adds some include files to facilitate supporting various SoM/baseboard combinations. Changes vs. v2: - resent the correct patches Changes vs. v1: - rebased to imx/dt branch - eliminate use of 'interrupts-extended' property according to Uwe Kleine-K?nig's comment ^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCHv3 01/12] ARM: dts: imx6-tx6: update model property to match current module HW revision 2017-10-17 9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann @ 2017-10-17 9:17 ` Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 02/12] ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts Lothar Waßmann ` (11 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 9:17 UTC (permalink / raw) To: linux-arm-kernel The current TX6Q module HW revision is 3 reflected in the module name suffix '-1030' (-1130 for LVDS). Change the model string to prevent confusion about what DTS file to use for these modules. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6q-tx6q-1010.dts | 4 ++-- arch/arm/boot/dts/imx6q-tx6q-1110.dts | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts index e14e6be..17ff7e7 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -44,7 +44,7 @@ #include "imx6qdl-tx6.dtsi" / { - model = "Ka-Ro electronics TX6Q-1010 Module"; + model = "Ka-Ro electronics TX6Q-1010/-1030 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; aliases { diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts index 0433e22..0f5e638 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -44,7 +44,7 @@ #include "imx6qdl-tx6.dtsi" / { - model = "Ka-Ro electronics TX6Q-1110 Module"; + model = "Ka-Ro electronics TX6Q-1110/-1130 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; aliases { -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCHv3 02/12] ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts 2017-10-17 9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 01/12] ARM: dts: imx6-tx6: update model property to match current module HW revision Lothar Waßmann @ 2017-10-17 9:17 ` Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 03/12] ARM: dts: imx6-tx6: remove obsolete ipu1 alias Lothar Waßmann ` (10 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 9:17 UTC (permalink / raw) To: linux-arm-kernel The display, that incorporates this touchpanel is obsolete and won't be supported any more. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6dl-tx6u-811x.dts | 23 +---------------------- arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts | 22 +--------------------- arch/arm/boot/dts/imx6q-tx6q-1110.dts | 21 --------------------- arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts | 22 +--------------------- 4 files changed, 3 insertions(+), 85 deletions(-) diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts index 5e0c6bb..f0f759a 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -98,19 +98,6 @@ }; }; -&i2c3 { - polytouch2: eeti at 04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti>; - interrupt-parent = <&gpio3>; - interrupts = <22 0>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; -}; - &kpp { status = "disabled"; /* pad conflict with backlight1 PWM */ }; @@ -168,11 +155,3 @@ &pwm1 { status = "okay"; }; - -&iomuxc { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts index b9a783f..c817324 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts @@ -1,5 +1,5 @@ /* - * Copyright 2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2016-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -106,18 +106,6 @@ xceiver-supply = <®_3v3>; }; -&i2c3 { - polytouch1: eeti at 04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti>; - interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; -}; - &kpp { status = "disabled"; /* pads partially clash with backlight1 PWM */ }; @@ -245,11 +233,3 @@ &pwm1 { status = "okay"; }; - -&iomuxc { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts index 0f5e638..900557d 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts @@ -98,19 +98,6 @@ }; }; -&i2c3 { - polytouch1: eeti at 04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti>; - interrupt-parent = <&gpio3>; - interrupts = <22 0>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; -}; - &kpp { status = "disabled"; /* pad conflict with backlight1 PWM */ }; @@ -172,11 +159,3 @@ &sata { status = "okay"; }; - -&iomuxc { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts index d78b129..6b42c44 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts @@ -1,5 +1,5 @@ /* - * Copyright 2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2016-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -107,18 +107,6 @@ xceiver-supply = <®_3v3>; }; -&i2c3 { - polytouch1: eeti at 04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti>; - interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; -}; - &ipu2 { status = "disabled"; }; @@ -254,11 +242,3 @@ &sata { status = "okay"; }; - -&iomuxc { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; -}; -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCHv3 03/12] ARM: dts: imx6-tx6: remove obsolete ipu1 alias 2017-10-17 9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 01/12] ARM: dts: imx6-tx6: update model property to match current module HW revision Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 02/12] ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts Lothar Waßmann @ 2017-10-17 9:17 ` Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 04/12] ARM: dts: imx6-tx6: add trickle-charge config for DS1339 Lothar Waßmann ` (9 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 9:17 UTC (permalink / raw) To: linux-arm-kernel The 'ipu1' alias is already defined in imx6q.dtsi. There is no need to redefine it here. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts index 6b42c44..be9233d 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts @@ -49,7 +49,6 @@ aliases { display = &lvds0; - ipu1 = &ipu2; lvds0 = &lvds0; lvds1 = &lvds1; }; -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCHv3 04/12] ARM: dts: imx6-tx6: add trickle-charge config for DS1339 2017-10-17 9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (2 preceding siblings ...) 2017-10-17 9:17 ` [PATCHv3 03/12] ARM: dts: imx6-tx6: remove obsolete ipu1 alias Lothar Waßmann @ 2017-10-17 9:17 ` Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 05/12] ARM: dts: imx6-tx6: improve ethernet related pinctrl setup Lothar Waßmann ` (8 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 9:17 UTC (permalink / raw) To: linux-arm-kernel As the DS1339 driver now supports enabling the trickle charge feature via DTB, add the appropriate properties to utilize this feature. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index c6bec97..a50bf71 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -284,6 +284,8 @@ ds1339: rtc at 68 { compatible = "dallas,ds1339"; reg = <0x68>; + trickle-resistor-ohms = <250>; + trickle-diode-disable; }; }; -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCHv3 05/12] ARM: dts: imx6-tx6: improve ethernet related pinctrl setup 2017-10-17 9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (3 preceding siblings ...) 2017-10-17 9:17 ` [PATCHv3 04/12] ARM: dts: imx6-tx6: add trickle-charge config for DS1339 Lothar Waßmann @ 2017-10-17 9:17 ` Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 06/12] ARM: dts: imx6-tx6: specify ethernet phy reset post-delay Lothar Waßmann ` (7 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 9:17 UTC (permalink / raw) To: linux-arm-kernel Remove the PHY INT and RESET pins from hog section and put them into their own pinctrl nodes referenced by the appropriate driver nodes. Also, the MDIO pins are required for probing the Ethernet PHY, so they must be configured by the FEC driver, not by the PHY driver. Move the corresponding pinctrl settings from the PHY subnode to the FEC node. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index a50bf71..f2cd3e7 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -241,7 +241,7 @@ &fec { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; + pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>; clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET_REF>, @@ -261,8 +261,9 @@ compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_mdio>; - interrupts-extended = <&gpio7 1 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&pinctrl_etnphy_int>; + interrupt-parent = <&gpio7>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; }; }; }; @@ -334,8 +335,6 @@ pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */ >; }; @@ -453,12 +452,24 @@ >; }; + pinctrl_etnphy_int: etnphy-intgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */ + >; + }; + pinctrl_etnphy_power: etnphy-pwrgrp { fsl,pins = < MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */ >; }; + pinctrl_etnphy_rst: etnphy-rstgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ + >; + }; + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCHv3 06/12] ARM: dts: imx6-tx6: specify ethernet phy reset post-delay 2017-10-17 9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (4 preceding siblings ...) 2017-10-17 9:17 ` [PATCHv3 05/12] ARM: dts: imx6-tx6: improve ethernet related pinctrl setup Lothar Waßmann @ 2017-10-17 9:17 ` Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 07/12] ARM: dts: imx6-tx6: convert to using simple-audio-card Lothar Waßmann ` (6 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 9:17 UTC (permalink / raw) To: linux-arm-kernel Under certain circumstances the ethernet PHY cannot be detected on Ka-Ro electronics TX6 modules. Using a phy-reset-post-delay of at least 2ms alleviates this problem. Define it to 10ms to be on the safe side. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index f2cd3e7..f1655b3 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -249,6 +249,7 @@ clock-names = "ipg", "ahb", "ptp", "enet_out"; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; + phy-reset-post-delay = <10>; phy-handle = <&etnphy>; phy-supply = <®_3v3_etn>; status = "okay"; -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCHv3 07/12] ARM: dts: imx6-tx6: convert to using simple-audio-card 2017-10-17 9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (5 preceding siblings ...) 2017-10-17 9:17 ` [PATCHv3 06/12] ARM: dts: imx6-tx6: specify ethernet phy reset post-delay Lothar Waßmann @ 2017-10-17 9:17 ` Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 08/12] ARM: dts: imx6-tx6: add support for I2C bus recovery Lothar Waßmann ` (5 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 9:17 UTC (permalink / raw) To: linux-arm-kernel Convert the DTS sound setup to use the simple-audio-card driver. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 50 ++++++++++++++++++++++++++++++++------ 1 file changed, 42 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index f1655b3..eb5accd 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -43,6 +43,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> / { aliases { @@ -183,24 +184,56 @@ }; sound { - compatible = "karo,imx6qdl-tx6qdl-sgtl5000", - "fsl,imx-audio-sgtl5000"; - model = "sgtl5000-audio"; + compatible = "karo,imx6qdl-tx6-sgtl5000", + "simple-audio-card"; + simple-audio-card,name = "imx6qdl-tx6-sgtl5000-audio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; - ssi-controller = <&ssi1>; - audio-codec = <&sgtl5000>; - audio-routing = + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", "Headphone Jack", "HP_OUT"; - mux-int-port = <1>; - mux-ext-port = <5>; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; }; }; &audmux { status = "okay"; + + ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSEL(4) | + IMX_AUDMUX_V2_PTCR_TCSEL(4) | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(4) + >; + }; + + pins5 { + fsl,audmux-port = <4>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(0) + >; + }; }; &can1 { @@ -299,6 +332,7 @@ sgtl5000: sgtl5000 at 0a { compatible = "fsl,sgtl5000"; + #sound-dai-cells = <0>; reg = <0x0a>; VDDA-supply = <®_2v5>; VDDIO-supply = <®_3v3>; -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCHv3 08/12] ARM: dts: imx6-tx6: add support for I2C bus recovery 2017-10-17 9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (6 preceding siblings ...) 2017-10-17 9:17 ` [PATCHv3 07/12] ARM: dts: imx6-tx6: convert to using simple-audio-card Lothar Waßmann @ 2017-10-17 9:17 ` Lothar Waßmann 2017-10-17 9:18 ` [PATCHv3 09/12] ARM: dts: imx6-tx6: move display configuration to .dtsi file Lothar Waßmann ` (4 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 9:17 UTC (permalink / raw) To: linux-arm-kernel Define the required properties to enable I2C bus recovery supported by the I2C subsystem. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index eb5accd..c140402 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -311,8 +311,11 @@ }; &i2c1 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; clock-frequency = <400000>; status = "okay"; @@ -325,8 +328,11 @@ }; &i2c3 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; clock-frequency = <400000>; status = "okay"; @@ -552,6 +558,13 @@ >; }; + pinctrl_i2c1_gpio: i2c1-gpiogrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1 + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1 + >; + }; + pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 @@ -559,6 +572,13 @@ >; }; + pinctrl_i2c3_gpio: i2c3-gpiogrp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 + >; + }; + pinctrl_kpp: kppgrp { fsl,pins = < MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1 -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCHv3 09/12] ARM: dts: imx6-tx6: move display configuration to .dtsi file 2017-10-17 9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (7 preceding siblings ...) 2017-10-17 9:17 ` [PATCHv3 08/12] ARM: dts: imx6-tx6: add support for I2C bus recovery Lothar Waßmann @ 2017-10-17 9:18 ` Lothar Waßmann 2017-10-17 9:18 ` [PATCHv3 10/12] ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard Lothar Waßmann ` (3 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 9:18 UTC (permalink / raw) To: linux-arm-kernel Currently the display (LCD or LVDS) configuration is duplicated with slight variations in each TX6 module specific file. Move it to an include file for simplification and consistency. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts | 74 +------ arch/arm/boot/dts/imx6dl-tx6s-8034.dts | 171 +--------------- arch/arm/boot/dts/imx6dl-tx6s-8035.dts | 171 +--------------- arch/arm/boot/dts/imx6dl-tx6u-801x.dts | 161 +-------------- arch/arm/boot/dts/imx6dl-tx6u-8033.dts | 170 +--------------- arch/arm/boot/dts/imx6dl-tx6u-811x.dts | 109 +--------- arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts | 185 +---------------- arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts | 74 +------ arch/arm/boot/dts/imx6q-tx6q-1010.dts | 159 +-------------- arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts | 74 +------ arch/arm/boot/dts/imx6q-tx6q-1020.dts | 162 +-------------- arch/arm/boot/dts/imx6q-tx6q-1036.dts | 170 +--------------- arch/arm/boot/dts/imx6q-tx6q-1110.dts | 109 +--------- arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts | 187 ++---------------- arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi | 252 +++++++++++++++++++++++ arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi | 286 +++++++++++++++++++++++++++ arch/arm/boot/dts/imx6qdl-tx6.dtsi | 4 +- 17 files changed, 616 insertions(+), 1902 deletions(-) create mode 100644 arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi create mode 100644 arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts index 389fc16..51a9bb9 100644 --- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts +++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,70 +42,16 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6DL Module on CoMpact TFT"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; +}; - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&ET070001DM6>; - - ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; +&backlight { + pwms = <&pwm2 0 500000 0>; + /delete-property/ turn-on-delay-ms; }; &can1 { @@ -116,14 +62,14 @@ xceiver-supply = <®_3v3>; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - &kpp { status = "disabled"; }; +&lcd_panel { + compatible = "edt,etm0700g0edh6"; +}; + ®_can_xcvr { status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts index a21075b..9eb2ef1 100644 --- a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts +++ b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts @@ -1,5 +1,5 @@ /* - * Copyright 2015-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2015-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,174 +42,15 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6S-8034 Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - aliases { - display = &display; - ipu1 = &ipu1; - }; - cpus { /delete-node/ cpu at 1; }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_2>; - interface-pix-fmt = "rgb24"; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&vga>; - - vga: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -227,11 +68,3 @@ MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */ >; }; - -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - -®_lcd0_pwr { - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts index fee8854..a5532ec 100644 --- a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts +++ b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts @@ -1,5 +1,5 @@ /* - * Copyright 2015-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2015-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,174 +42,15 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6S-8035 Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - aliases { - display = &display; - ipu1 = &ipu1; - }; - cpus { /delete-node/ cpu at 1; }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_2>; - interface-pix-fmt = "rgb24"; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&vga>; - - vga: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -220,14 +61,6 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - -®_lcd0_pwr { - status = "disabled"; -}; - &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts index efe5772..67ed045 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,166 +42,9 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6U-801x Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; - -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; }; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts index e222086..7030b26 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,169 +42,11 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6U-8033 Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_2>; - interface-pix-fmt = "rgb24"; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&vga>; - - vga: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -215,14 +57,6 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - -®_lcd0_pwr { - status = "disabled"; -}; - &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts index f0f759a..5342f2f 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts @@ -42,116 +42,9 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lvds.dtsi" / { model = "Ka-Ro electronics TX6U-811x Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - - aliases { - display = &lvds0; - lvds0 = &lvds0; - lvds1 = &lvds1; - }; - - backlight0: backlight0 { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_lcd0_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - backlight1: backlight1 { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 500000 0>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; -}; - -&kpp { - status = "disabled"; /* pad conflict with backlight1 PWM */ -}; - -&ldb { - status = "okay"; - - lvds0: lvds-channel at 0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds_timing0>; - lvds_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - - lvds1: lvds-channel at 1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "disabled"; - - display-timings { - native-mode = <&lvds_timing1>; - lvds_timing1: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; -}; - -&pwm1 { - status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts index c817324..e43ff12 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts @@ -42,60 +42,21 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lvds.dtsi" / { model = "Ka-Ro electronics TX6U-81xx Module on MB7 baseboard"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; +}; - aliases { - display = &lvds0; - lvds0 = &lvds0; - lvds1 = &lvds1; - }; - - backlight0: backlight0 { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_lcd0_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; +&backlight0 { + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + turn-on-delay-ms = <35>; +}; - backlight1: backlight1 { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; +&backlight1 { + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + turn-on-delay-ms = <35>; }; &can1 { @@ -105,131 +66,3 @@ &can2 { xceiver-supply = <®_3v3>; }; - -&kpp { - status = "disabled"; /* pads partially clash with backlight1 PWM */ -}; - -&ldb { - status = "okay"; - - lvds0: lvds-channel at 0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds0_timing1>; - - lvds0_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - lvds0_timing1: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hfront-porch = <16>; - vback-porch = <31>; - vfront-porch = <12>; - hsync-len = <96>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - lvds0_timing2: nl12880bc20 { - clock-frequency = <71000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <50>; - hfront-porch = <50>; - vback-porch = <5>; - vfront-porch = <5>; - hsync-len = <60>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - - lvds1: lvds-channel at 1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds1_timing2>; - - lvds1_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - lvds1_timing1: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hfront-porch = <16>; - vback-porch = <31>; - vfront-porch = <12>; - hsync-len = <96>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - lvds1_timing2: nl12880bc20 { - clock-frequency = <71000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <50>; - hfront-porch = <50>; - vback-porch = <5>; - vfront-porch = <5>; - hsync-len = <60>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; -}; - -&pwm1 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts index d3ee1f5..ac3050a 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,70 +42,16 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; +}; - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&ET070001DM6>; - - ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; +&backlight { + pwms = <&pwm2 0 500000 0>; + /delete-property/ turn-on-delay-ms; }; &can1 { @@ -116,14 +62,14 @@ xceiver-supply = <®_3v3>; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - &kpp { status = "disabled"; }; +&lcd_panel { + compatible = "edt,etm0700g0edh6"; +}; + ®_can_xcvr { status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts index 17ff7e7..4ee860b 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts @@ -42,166 +42,13 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1010/-1030 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; +&ipu2 { + status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts index ea84561..a773f25 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,70 +42,16 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; +}; - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&ET070001DM6>; - - ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; +&backlight { + pwms = <&pwm2 0 500000 0>; + /delete-property/ turn-on-delay-ms; }; &can1 { @@ -124,14 +70,14 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - &kpp { status = "disabled"; }; +&lcd_panel { + compatible = "edt,etm0700g0edh6"; +}; + ®_can_xcvr { status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts index 9c168ee..0a4daec 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,164 +42,11 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1020 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -210,14 +57,15 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; +&ipu2 { + status = "disabled"; }; &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <4>; + non-removable; no-1-8-v; fsl,wp-controller; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/imx6q-tx6q-1036.dts index c81e8bd..cb2fcb4 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1036.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1036.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Wa?mann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Wa?mann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,169 +42,11 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1036 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: disp0 { - compatible = "fsl,imx-parallel-display"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_2>; - interface-pix-fmt = "rgb24"; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&vga>; - - vga: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -215,18 +57,10 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - &ipu2 { status = "disabled"; }; -®_lcd0_pwr { - status = "disabled"; -}; - &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts index 900557d..f7b0acb 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts @@ -42,118 +42,15 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lvds.dtsi" / { model = "Ka-Ro electronics TX6Q-1110/-1130 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &lvds0; - lvds0 = &lvds0; - lvds1 = &lvds1; - }; - - backlight0: backlight0 { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_lcd0_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - backlight1: backlight1 { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 500000 0>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; }; -&kpp { - status = "disabled"; /* pad conflict with backlight1 PWM */ -}; - -&ldb { - status = "okay"; - - lvds0: lvds-channel at 0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds_timing0>; - lvds_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - - lvds1: lvds-channel at 1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "disabled"; - - display-timings { - native-mode = <&lvds_timing1>; - lvds_timing1: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; -}; - -&pwm1 { - status = "okay"; +&ipu2 { + status = "disabled"; }; &sata { diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts index be9233d..9648c21 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts @@ -42,60 +42,23 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lvds.dtsi" / { model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; +}; - aliases { - display = &lvds0; - lvds0 = &lvds0; - lvds1 = &lvds1; - }; - - backlight0: backlight0 { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_lcd0_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; +&backlight0 { + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + turn-on-delay-ms = <35>; + power-supply = <®_lcd1_pwr>; +}; - backlight1: backlight1 { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; +&backlight1 { + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + turn-on-delay-ms = <35>; + power-supply = <®_lcd1_pwr>; }; &can1 { @@ -110,132 +73,12 @@ status = "disabled"; }; -&kpp { - status = "disabled"; /* pads partially clash with backlight1 PWM */ +&lvds0_panel { + compatible = "edt,et057090dhu"; }; -&ldb { - status = "okay"; - - lvds0: lvds-channel at 0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds0_timing1>; - - lvds0_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - lvds0_timing1: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hfront-porch = <16>; - vback-porch = <31>; - vfront-porch = <12>; - hsync-len = <96>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - lvds0_timing2: nl12880bc20 { - clock-frequency = <71000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <50>; - hfront-porch = <50>; - vback-porch = <5>; - vfront-porch = <5>; - hsync-len = <60>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - - lvds1: lvds-channel at 1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds1_timing2>; - - lvds1_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - lvds1_timing1: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hfront-porch = <16>; - vback-porch = <31>; - vfront-porch = <12>; - hsync-len = <96>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - lvds1_timing2: nl12880bc20 { - clock-frequency = <71000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <50>; - hfront-porch = <50>; - vback-porch = <5>; - vfront-porch = <5>; - hsync-len = <60>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; -}; - -&pwm1 { - status = "okay"; +&lvds1_panel { + compatible = "edt,et057090dhu"; }; &sata { diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi new file mode 100644 index 0000000..5102fc4 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi @@ -0,0 +1,252 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd1_pwr>; + enable-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + turn-on-delay-ms = <35>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + lcd_panel: lcd-panel { + compatible = "edt,etm0700g0dh6"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + backlight = <&backlight>; + bus-format-override = "rgb24"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_out>; + }; + }; + }; + + display: disp0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port at 0 { + reg = <0>; + + lcd_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port at 1 { + reg = <1>; + + lcd_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + + display-timings { + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + u-boot,panel-name = "edt,et057090dhu"; + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + u-boot,panel-name = "edt,et0350g0dh6"; + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + u-boot,panel-name = "edt,et0430g0dh6"; + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + u-boot,panel-name = "edt,etm0700g0dh6"; + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + CoMTFT { /* same as ET0700 but with inverted pixel clock */ + u-boot,panel-name = "edt,etm0700g0edh6"; + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_in>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi new file mode 100644 index 0000000..2ca2eb3 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi @@ -0,0 +1,286 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + aliases { + display = &lvds0; + lvds0 = &lvds0; + lvds1 = &lvds1; + }; + + backlight0: backlight0 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 0>; + power-supply = <®_lcd0_pwr>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + backlight1: backlight1 { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 0>; + power-supply = <®_lcd1_pwr>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + lvds0_panel: lvds0-panel { + compatible = "nlt,nl12880bc20-spwg-24"; + backlight = <&backlight0>; + power-supply = <®_3v3>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + lvds1_panel: lvds1-panel { + compatible = "nlt,nl12880bc20-spwg-24"; + backlight = <&backlight1>; + power-supply = <®_3v3>; + + port { + panel_in_lvds1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; +}; + +&kpp { + status = "disabled"; /* pad conflict with backlight1 PWM */ +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel at 0 { + fsl,data-width = <18>; + status = "okay"; + + port at 4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + + display-timings { + hsd100pxn1 { + u-boot,panel-name = "hannstar,hsd100pxn1"; + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hfront-porch = <16>; + vback-porch = <31>; + vfront-porch = <12>; + hsync-len = <96>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + nl12880bc20 { + u-boot,panel-name = "nlt,nl12880bc20-spwg-24"; + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <50>; + hfront-porch = <50>; + vback-porch = <5>; + vfront-porch = <5>; + hsync-len = <60>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0700 { + u-boot,panel-name = "edt,etm0700g0dh6"; + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + u-boot,panel-name = "edt,et057090dhu"; + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; + + lvds1: lvds-channel at 1 { + fsl,data-width = <18>; + status = "okay"; + + port at 4 { + reg = <4>; + + lvds1_out: endpoint { + remote-endpoint = <&panel_in_lvds1>; + }; + }; + + display-timings { + hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hfront-porch = <16>; + vback-porch = <31>; + vfront-porch = <12>; + hsync-len = <96>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + nl12880bc20 { + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <50>; + hfront-porch = <50>; + vback-porch = <5>; + vfront-porch = <5>; + hsync-len = <60>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +®_lcd0_pwr { + status = "okay"; +}; + +®_lcd1_pwr { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index c140402..6e24ac9 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -146,7 +146,7 @@ pinctrl-0 = <&pinctrl_lcd0_pwr>; gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-boot-on; + status = "disabled"; }; reg_lcd1_pwr: regulator-lcd1-pwr { @@ -158,7 +158,7 @@ pinctrl-0 = <&pinctrl_lcd1_pwr>; gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-boot-on; + status = "disabled"; }; reg_usbh1_vbus: regulator-usbh1-vbus { -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCHv3 10/12] ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard 2017-10-17 9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (8 preceding siblings ...) 2017-10-17 9:18 ` [PATCHv3 09/12] ARM: dts: imx6-tx6: move display configuration to .dtsi file Lothar Waßmann @ 2017-10-17 9:18 ` Lothar Waßmann 2017-10-17 9:18 ` [PATCHv3 11/12] ARM: dts: imx: add support for TX6QP Lothar Waßmann ` (2 subsequent siblings) 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 9:18 UTC (permalink / raw) To: linux-arm-kernel Move the MB7 specific settings to a separate .dtsi file to facilitate supporting more module variants with this baseboard. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts | 9 +-- arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts | 42 +------------ arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi | 99 ++++++++++++++++++++++++++++++ 3 files changed, 102 insertions(+), 48 deletions(-) create mode 100644 arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts index e43ff12..21eaec9 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts @@ -43,6 +43,7 @@ #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" #include "imx6qdl-tx6-lvds.dtsi" +#include "imx6qdl-tx6-mb7.dtsi" / { model = "Ka-Ro electronics TX6U-81xx Module on MB7 baseboard"; @@ -58,11 +59,3 @@ pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; turn-on-delay-ms = <35>; }; - -&can1 { - status = "disabled"; -}; - -&can2 { - xceiver-supply = <®_3v3>; -}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts index 9648c21..387edf2 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts @@ -40,47 +40,9 @@ */ /dts-v1/; -#include "imx6q.dtsi" -#include "imx6qdl-tx6.dtsi" -#include "imx6qdl-tx6-lvds.dtsi" +#include "imx6q-tx6q-1110.dts" +#include "imx6qdl-tx6-mb7.dtsi" / { model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard"; - compatible = "karo,imx6q-tx6q", "fsl,imx6q"; -}; - -&backlight0 { - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - turn-on-delay-ms = <35>; - power-supply = <®_lcd1_pwr>; -}; - -&backlight1 { - pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; - turn-on-delay-ms = <35>; - power-supply = <®_lcd1_pwr>; -}; - -&can1 { - status = "disabled"; -}; - -&can2 { - xceiver-supply = <®_3v3>; -}; - -&ipu2 { - status = "disabled"; -}; - -&lvds0_panel { - compatible = "edt,et057090dhu"; -}; - -&lvds1_panel { - compatible = "edt,et057090dhu"; -}; - -&sata { - status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi new file mode 100644 index 0000000..4c4e2e1 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi @@ -0,0 +1,99 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + backlight0 { + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + turn-on-delay-ms = <35>; + power-supply = <®_lcd1_pwr>; + }; + + backlight1 { + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + turn-on-delay-ms = <35>; + power-supply = <®_lcd1_pwr>; + }; + + lcd-panel { + compatible = "edt,et057090dhu"; + bus-format-override = "rgb24"; + pixelclk-active = <0>; + }; + + lvds0-panel { + compatible = "edt,etml1010g0dka"; + bus-format-override = "spwg-18"; + pixelclk-active = <0>; + }; + + lvds1-panel { + compatible = "edt,etml1010g0dka"; + bus-format-override = "spwg-18"; + pixelclk-active = <0>; + }; +}; + +&can1 { + status = "disabled"; +}; + +&can2 { + xceiver-supply = <®_3v3>; +}; + +&ds1339 { + /* + * The backup voltage of the module internal RTC is not wired + * by default on the MB7, so disable that RTC chip. + */ + status = "disabled"; +}; + +&i2c3 { + rtc: mcp7940x at 6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + }; +}; + +®_lcd0_pwr { + status = "disabled"; +}; -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCHv3 11/12] ARM: dts: imx: add support for TX6QP 2017-10-17 9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (9 preceding siblings ...) 2017-10-17 9:18 ` [PATCHv3 10/12] ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard Lothar Waßmann @ 2017-10-17 9:18 ` Lothar Waßmann 2017-10-17 9:18 ` [PATCHv3 12/12] ARM: dts: imx: add support for TX6 modules on MB7 baseboard Lothar Waßmann 2017-10-18 3:06 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Shawn Guo 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 9:18 UTC (permalink / raw) To: linux-arm-kernel The TX6QP-8037 is a Computer On Module manufactured by Ka-Ro electronics GmbH with the following characteristics: Processor Freescale i.MX 6QuadPlus MCIMX6QP7, 1 GHz RAM 1GiB 64-bit DDR3 SDRAM ROM 4GB HiRel eMMC Power supply Single 3.3 to 5V Size 26mm SO-DIMM Temp. Range -40?C to 105?C Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx6qp-tx6qp-8037.dts | 86 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6qp-tx6qp-8137.dts | 90 +++++++++++++++++++++++++++++++++ 3 files changed, 178 insertions(+) create mode 100644 arch/arm/boot/dts/imx6qp-tx6qp-8037.dts create mode 100644 arch/arm/boot/dts/imx6qp-tx6qp-8137.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 946a4b1..add34d1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -462,6 +462,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6qp-nitrogen6_som2.dtb \ imx6qp-sabreauto.dtb \ imx6qp-sabresd.dtb \ + imx6qp-tx6qp-8037.dtb \ + imx6qp-tx6qp-8137.dtb \ imx6qp-wandboard-revd1.dtb \ imx6qp-zii-rdu2.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts new file mode 100644 index 0000000..ffc0f2e --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts @@ -0,0 +1,86 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6qp.dtsi" +#include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" + +/ { + model = "Ka-Ro electronics TX6QP-8037 Module"; + compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp"; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&ipu2 { + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + non-removable; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts new file mode 100644 index 0000000..dd494d5 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts @@ -0,0 +1,90 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6qp.dtsi" +#include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lvds.dtsi" + +/ { + model = "Ka-Ro electronics TX6QP-8137 Module"; + compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp"; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&ipu2 { + status = "disabled"; +}; + +&sata { + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + non-removable; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; +}; -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCHv3 12/12] ARM: dts: imx: add support for TX6 modules on MB7 baseboard 2017-10-17 9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (10 preceding siblings ...) 2017-10-17 9:18 ` [PATCHv3 11/12] ARM: dts: imx: add support for TX6QP Lothar Waßmann @ 2017-10-17 9:18 ` Lothar Waßmann 2017-10-18 3:06 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Shawn Guo 12 siblings, 0 replies; 27+ messages in thread From: Lothar Waßmann @ 2017-10-17 9:18 UTC (permalink / raw) To: linux-arm-kernel Create .dts files for various Ka-Ro electronics TX modules on the MB7 baseboard. Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> --- arch/arm/boot/dts/Makefile | 8 ++++ arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts | 48 ++++++++++++++++++++++++ arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts | 48 ++++++++++++++++++++++++ arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts | 48 ++++++++++++++++++++++++ arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts | 48 ++++++++++++++++++++++++ arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts | 17 +-------- arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts | 48 ++++++++++++++++++++++++ arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts | 48 ++++++++++++++++++++++++ arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts | 48 ++++++++++++++++++++++++ arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts | 57 +++++++++++++++++++++++++++++ 10 files changed, 403 insertions(+), 15 deletions(-) create mode 100644 arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts create mode 100644 arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts create mode 100644 arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts create mode 100644 arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts create mode 100644 arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index add34d1..79226b7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -389,9 +389,13 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-ts4900.dtb \ imx6dl-tx6dl-comtft.dtb \ imx6dl-tx6s-8034.dtb \ + imx6dl-tx6s-8034-mb7.dtb \ imx6dl-tx6s-8035.dtb \ + imx6dl-tx6s-8035-mb7.dtb \ imx6dl-tx6u-801x.dtb \ + imx6dl-tx6u-80xx-mb7.dtb \ imx6dl-tx6u-8033.dtb \ + imx6dl-tx6u-8033-mb7.dtb \ imx6dl-tx6u-811x.dtb \ imx6dl-tx6u-81xx-mb7.dtb \ imx6dl-udoo.dtb \ @@ -450,6 +454,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-tx6q-1020.dtb \ imx6q-tx6q-1020-comtft.dtb \ imx6q-tx6q-1036.dtb \ + imx6q-tx6q-1036-mb7.dtb \ + imx6q-tx6q-10x0-mb7.dtb \ imx6q-tx6q-1110.dtb \ imx6q-tx6q-11x0-mb7.dtb \ imx6q-udoo.dtb \ @@ -463,7 +469,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6qp-sabreauto.dtb \ imx6qp-sabresd.dtb \ imx6qp-tx6qp-8037.dtb \ + imx6qp-tx6qp-8037-mb7.dtb \ imx6qp-tx6qp-8137.dtb \ + imx6qp-tx6qp-8137-mb7.dtb \ imx6qp-wandboard-revd1.dtb \ imx6qp-zii-rdu2.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts new file mode 100644 index 0000000..fc23b4d --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl-tx6s-8034.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6S-8034 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts new file mode 100644 index 0000000..4101c65 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl-tx6s-8035.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-8035 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts new file mode 100644 index 0000000..d34189f --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl-tx6u-8033.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-8033 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts new file mode 100644 index 0000000..aef5fcc --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl-tx6u-801x.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-8030/-8010/-8012 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts index 21eaec9..c4588fb 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts @@ -40,22 +40,9 @@ */ /dts-v1/; -#include "imx6dl.dtsi" -#include "imx6qdl-tx6.dtsi" -#include "imx6qdl-tx6-lvds.dtsi" +#include "imx6dl-tx6u-811x.dts" #include "imx6qdl-tx6-mb7.dtsi" / { - model = "Ka-Ro electronics TX6U-81xx Module on MB7 baseboard"; - compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; -}; - -&backlight0 { - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - turn-on-delay-ms = <35>; -}; - -&backlight1 { - pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; - turn-on-delay-ms = <35>; + model = "Ka-Ro electronics TX6U-8130/-8110 Module on MB7 baseboard"; }; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts new file mode 100644 index 0000000..9ffbb0fe7 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q-tx6q-1036.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1036 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts new file mode 100644 index 0000000..d43a5d8 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q-tx6q-1010.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1010/-1030 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts new file mode 100644 index 0000000..92b38e6 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6qp-tx6qp-8037.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-8037 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts new file mode 100644 index 0000000..07ad707 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts @@ -0,0 +1,57 @@ +/* + * Copyright 2017 Lothar Wa?mann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6qp-tx6qp-8137.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-8137 Module on MB7 baseboard"; + compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp"; +}; + +&ipu2 { + status = "disabled"; +}; + +&sata { + status = "okay"; +}; -- 2.1.4 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series 2017-10-17 9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann ` (11 preceding siblings ...) 2017-10-17 9:18 ` [PATCHv3 12/12] ARM: dts: imx: add support for TX6 modules on MB7 baseboard Lothar Waßmann @ 2017-10-18 3:06 ` Shawn Guo 12 siblings, 0 replies; 27+ messages in thread From: Shawn Guo @ 2017-10-18 3:06 UTC (permalink / raw) To: linux-arm-kernel On Tue, Oct 17, 2017 at 11:17:51AM +0200, Lothar Wa?mann wrote: > Please ignore the V2 series. I accidentally sent the patches from a > wrong directory. > > This patchset updates the dts files for the Ka-Ro electronics GmbH TX6 > module series and adds some include files to facilitate supporting > various SoM/baseboard combinations. Applied all, thanks. > Changes vs. v2: > - resent the correct patches > > Changes vs. v1: > - rebased to imx/dt branch > - eliminate use of 'interrupts-extended' property according to Uwe > Kleine-K?nig's comment > ^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2017-10-18 3:06 UTC | newest] Thread overview: 27+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2017-10-17 8:53 [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann 2017-10-17 8:53 ` [PATCH 01/12] ARM: dts: imx6-tx6: update model property to match current module HW revision Lothar Waßmann 2017-10-17 8:53 ` [PATCH 02/12] ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts Lothar Waßmann 2017-10-17 8:53 ` [PATCH 03/12] ARM: dts: imx6-tx6: remove obsolete ipu1 alias Lothar Waßmann 2017-10-17 8:53 ` [PATCH 04/12] ARM: dts: imx6-tx6: add trickle-charge config for DS1339 Lothar Waßmann 2017-10-17 8:53 ` [PATCH 05/12] ARM: dts: imx6-tx6: improve ethernet related pinctrl setup Lothar Waßmann 2017-10-17 8:53 ` [PATCH 06/12] ARM: dts: imx6-tx6: specify ethernet phy reset post-delay Lothar Waßmann 2017-10-17 8:53 ` [PATCH 07/12] ARM: dts: imx6-tx6: convert to using simple-audio-card Lothar Waßmann 2017-10-17 8:53 ` [PATCH 08/12] ARM: dts: imx6-tx6: add support for I2C bus recovery Lothar Waßmann 2017-10-17 8:53 ` [PATCH 09/12] ARM: dts: imx6-tx6: move display configuration to .dtsi file Lothar Waßmann 2017-10-17 8:53 ` [PATCH 10/12] ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard Lothar Waßmann 2017-10-17 8:53 ` [PATCH 11/12] ARM: dts: imx: add support for TX6QP Lothar Waßmann 2017-10-17 8:53 ` [PATCH 12/12] ARM: dts: imx: add support for TX6 modules on MB7 baseboard Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 01/12] ARM: dts: imx6-tx6: update model property to match current module HW revision Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 02/12] ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 03/12] ARM: dts: imx6-tx6: remove obsolete ipu1 alias Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 04/12] ARM: dts: imx6-tx6: add trickle-charge config for DS1339 Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 05/12] ARM: dts: imx6-tx6: improve ethernet related pinctrl setup Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 06/12] ARM: dts: imx6-tx6: specify ethernet phy reset post-delay Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 07/12] ARM: dts: imx6-tx6: convert to using simple-audio-card Lothar Waßmann 2017-10-17 9:17 ` [PATCHv3 08/12] ARM: dts: imx6-tx6: add support for I2C bus recovery Lothar Waßmann 2017-10-17 9:18 ` [PATCHv3 09/12] ARM: dts: imx6-tx6: move display configuration to .dtsi file Lothar Waßmann 2017-10-17 9:18 ` [PATCHv3 10/12] ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard Lothar Waßmann 2017-10-17 9:18 ` [PATCHv3 11/12] ARM: dts: imx: add support for TX6QP Lothar Waßmann 2017-10-17 9:18 ` [PATCHv3 12/12] ARM: dts: imx: add support for TX6 modules on MB7 baseboard Lothar Waßmann 2017-10-18 3:06 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Shawn Guo
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).