linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/8] arm/arm64: KVM: limit icache invalidation to prefetch aborts
Date: Fri, 20 Oct 2017 16:48:56 +0100	[thread overview]
Message-ID: <20171020154904.31427-1-marc.zyngier@arm.com> (raw)

It was recently reported that on a VM restore, we seem to spend a
disproportionate amount of time invalidation the icache. This is
partially due to some HW behaviour, but also because we're being a bit
dumb and are invalidating the icache for every page we map at S2, even
if that on a data access.

The slightly better way of doing this is to mark the pages XN at S2,
and wait for the the guest to execute something in that page, at which
point we perform the invalidation. As it is likely that there is a lot
less instruction than data, we win (or so we hope).

We also take this opportunity to drop the extra dcache clean to the
PoU which is pretty useless, as we already clean all the way to the
PoC...

Running a bare metal test that touches 1GB of memory (using a 4kB
stride) leads to the following results on Seattle:

4.13:
do_fault_read.bin:       0.565885992 seconds time elapsed
do_fault_write.bin:       0.738296337 seconds time elapsed
do_fault_read_write.bin:       1.241812231 seconds time elapsed

4.14-rc3+patches:
do_fault_read.bin:       0.244961803 seconds time elapsed
do_fault_write.bin:       0.422740092 seconds time elapsed
do_fault_read_write.bin:       0.643402470 seconds time elapsed

We're almost halving the time of something that more or less looks
like a restore operation. Some larger systems will show much bigger
benefits as they become less impacted by the icache invalidation
(which is broadcast in the inner shareable domain). I've tried to
measure the impact on a VM boot in order to assess the impact of
taking an extra permission fault, but found that any difference was
simply noise.

I've also given it a test run on both Cubietruck and Jetson-TK1.

Tests are archived here:
https://git.kernel.org/pub/scm/linux/kernel/git/maz/kvm-ws-tests.git/

I'd value some additional test results on HW I don't have access to.

* From v1:
  - Some function renaming (coherent->clean/invalidate)
  - Made the arm64 icache invalidation a macro that's now used in
    two places
  - Fixed BTB flushing on 32bit
  - Added stage2_is_exec as a predicate for XN being absent from the
    entry
  - Dropped patch #10 which was both useless and broken, and patch #9
    that thus became useless
  - Tried to measure the impact on kernel boot time and failed to see
    any difference

Marc Zyngier (8):
  arm64: KVM: Add invalidate_icache_range helper
  arm: KVM: Add optimized PIPT icache flushing
  arm64: KVM: PTE/PMD S2 XN bit definition
  KVM: arm/arm64: Limit icache invalidation to prefetch aborts
  KVM: arm/arm64: Only clean the dcache on translation fault
  KVM: arm/arm64: Preserve Exec permission across R/W permission faults
  KVM: arm/arm64: Drop vcpu parameter from guest cache maintenance
    operartions
  KVM: arm/arm64: Detangle kvm_mmu.h from kvm_hyp.h

 arch/arm/include/asm/kvm_hyp.h         |  3 +-
 arch/arm/include/asm/kvm_mmu.h         | 61 +++++++++++++++++++++++++++-----
 arch/arm/include/asm/pgtable.h         |  4 +--
 arch/arm/kvm/hyp/switch.c              |  1 +
 arch/arm/kvm/hyp/tlb.c                 |  1 +
 arch/arm64/include/asm/assembler.h     | 26 ++++++++++++++
 arch/arm64/include/asm/cacheflush.h    |  8 +++++
 arch/arm64/include/asm/kvm_hyp.h       |  1 -
 arch/arm64/include/asm/kvm_mmu.h       | 33 ++++++++++++++----
 arch/arm64/include/asm/pgtable-hwdef.h |  2 ++
 arch/arm64/include/asm/pgtable-prot.h  |  4 +--
 arch/arm64/kvm/hyp/debug-sr.c          |  1 +
 arch/arm64/kvm/hyp/switch.c            |  1 +
 arch/arm64/kvm/hyp/tlb.c               |  1 +
 arch/arm64/mm/cache.S                  | 26 ++++++++------
 virt/kvm/arm/hyp/vgic-v2-sr.c          |  1 +
 virt/kvm/arm/mmu.c                     | 64 +++++++++++++++++++++++++++-------
 17 files changed, 195 insertions(+), 43 deletions(-)

-- 
2.14.1

             reply	other threads:[~2017-10-20 15:48 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-20 15:48 Marc Zyngier [this message]
2017-10-20 15:48 ` [PATCH v2 1/8] arm64: KVM: Add invalidate_icache_range helper Marc Zyngier
2017-10-23 12:05   ` Will Deacon
2017-10-23 12:37     ` Marc Zyngier
2017-10-23 13:07       ` Will Deacon
2017-10-20 15:48 ` [PATCH v2 2/8] arm: KVM: Add optimized PIPT icache flushing Marc Zyngier
2017-10-20 16:27   ` Mark Rutland
2017-10-20 16:53     ` Marc Zyngier
2017-10-20 16:54       ` Mark Rutland
2017-10-21 15:18         ` Christoffer Dall
2017-10-31 13:51           ` Mark Rutland
2017-10-20 15:48 ` [PATCH v2 3/8] arm64: KVM: PTE/PMD S2 XN bit definition Marc Zyngier
2017-10-20 15:49 ` [PATCH v2 4/8] KVM: arm/arm64: Limit icache invalidation to prefetch aborts Marc Zyngier
2017-10-20 15:49 ` [PATCH v2 5/8] KVM: arm/arm64: Only clean the dcache on translation fault Marc Zyngier
2017-10-20 15:49 ` [PATCH v2 6/8] KVM: arm/arm64: Preserve Exec permission across R/W permission faults Marc Zyngier
2017-10-21 15:17   ` Christoffer Dall
2017-10-20 15:49 ` [PATCH v2 7/8] KVM: arm/arm64: Drop vcpu parameter from guest cache maintenance operartions Marc Zyngier
2017-10-20 15:49 ` [PATCH v2 8/8] KVM: arm/arm64: Detangle kvm_mmu.h from kvm_hyp.h Marc Zyngier
2017-10-21 15:24 ` [PATCH v2 0/8] arm/arm64: KVM: limit icache invalidation to prefetch aborts Christoffer Dall
2017-10-22  9:20 ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171020154904.31427-1-marc.zyngier@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).