From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Wed, 25 Oct 2017 14:36:32 +0200 Subject: [PATCH 1/2] ARM: dts: sun8i: h3-h5: Move pinctrl of mmc0 from dts to dtsi In-Reply-To: <20171022091957.24614-2-joonas.kylmala@iki.fi> References: <20171022091957.24614-1-joonas.kylmala@iki.fi> <20171022091957.24614-2-joonas.kylmala@iki.fi> Message-ID: <20171025123632.3jfjcztztm2qowrp@flea> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sun, Oct 22, 2017 at 12:19:56PM +0300, Joonas Kylm?l? wrote: > Most of the boards use the mmc0 pins and their attributes defined in > mmc0_pins_a and mmc0_cd_pin. Let's default to those by moving the > pinctrl attributes to the dtsi file. This makes it easier to modify > device trees in the future as there is only one place to change the > pinctrl attributes. > > As a side effect this patch also adds the detect pin of Orange Pi > Zero's mmc0 under pinctrl as it should have been there right from the > beginning. We're actually in the process of removing those gpio pinctrl nodes. Could you make that while you're at it? Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: