From: wenyou.yang@microchip.com (Wenyou Yang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 3/5] media: atmel-isc: Enable the clocks during probe
Date: Fri, 27 Oct 2017 11:21:30 +0800 [thread overview]
Message-ID: <20171027032132.16418-4-wenyou.yang@microchip.com> (raw)
In-Reply-To: <20171027032132.16418-1-wenyou.yang@microchip.com>
To meet the relationship, enable the HCLOCK and ispck during the
device probe, "isc_pck frequency is less than or equal to isc_ispck,
and isc_ispck is greater than or equal to HCLOCK."
Meanwhile, call the pm_runtime_enable() in the right place.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
Changes in v5:
- Fix the clock ID to ISC_ISPCK, instead of ISC_MCK for
isc_clk_is_enabled().
Changes in v4:
- Move pm_runtime_enable() call from the complete callback to the
end of probe.
- Call pm_runtime_get_sync() and pm_runtime_put_sync() in
->is_enabled() callbacks.
- Call clk_disable_unprepare() in ->remove callback.
Changes in v3: None
Changes in v2: None
drivers/media/platform/atmel/atmel-isc.c | 34 ++++++++++++++++++++++++++++----
1 file changed, 30 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
index 329ee8f256bb..4431c27dfb09 100644
--- a/drivers/media/platform/atmel/atmel-isc.c
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -389,8 +389,14 @@ static int isc_clk_is_enabled(struct clk_hw *hw)
struct isc_clk *isc_clk = to_isc_clk(hw);
u32 status;
+ if (isc_clk->id == ISC_ISPCK)
+ pm_runtime_get_sync(isc_clk->dev);
+
regmap_read(isc_clk->regmap, ISC_CLKSR, &status);
+ if (isc_clk->id == ISC_ISPCK)
+ pm_runtime_put_sync(isc_clk->dev);
+
return status & ISC_CLK(isc_clk->id) ? 1 : 0;
}
@@ -1866,25 +1872,37 @@ static int atmel_isc_probe(struct platform_device *pdev)
return ret;
}
+ ret = clk_prepare_enable(isc->hclock);
+ if (ret) {
+ dev_err(dev, "failed to enable hclock: %d\n", ret);
+ return ret;
+ }
+
ret = isc_clk_init(isc);
if (ret) {
dev_err(dev, "failed to init isc clock: %d\n", ret);
- goto clean_isc_clk;
+ goto unprepare_hclk;
}
isc->ispck = isc->isc_clks[ISC_ISPCK].clk;
+ ret = clk_prepare_enable(isc->ispck);
+ if (ret) {
+ dev_err(dev, "failed to enable ispck: %d\n", ret);
+ goto unprepare_hclk;
+ }
+
/* ispck should be greater or equal to hclock */
ret = clk_set_rate(isc->ispck, clk_get_rate(isc->hclock));
if (ret) {
dev_err(dev, "failed to set ispck rate: %d\n", ret);
- goto clean_isc_clk;
+ goto unprepare_clk;
}
ret = v4l2_device_register(dev, &isc->v4l2_dev);
if (ret) {
dev_err(dev, "unable to register v4l2 device.\n");
- goto clean_isc_clk;
+ goto unprepare_clk;
}
ret = isc_parse_dt(dev, isc);
@@ -1917,7 +1935,9 @@ static int atmel_isc_probe(struct platform_device *pdev)
break;
}
+ pm_runtime_set_active(dev);
pm_runtime_enable(dev);
+ pm_request_idle(dev);
return 0;
@@ -1927,7 +1947,11 @@ static int atmel_isc_probe(struct platform_device *pdev)
unregister_v4l2_device:
v4l2_device_unregister(&isc->v4l2_dev);
-clean_isc_clk:
+unprepare_clk:
+ clk_disable_unprepare(isc->ispck);
+unprepare_hclk:
+ clk_disable_unprepare(isc->hclock);
+
isc_clk_cleanup(isc);
return ret;
@@ -1938,6 +1962,8 @@ static int atmel_isc_remove(struct platform_device *pdev)
struct isc_device *isc = platform_get_drvdata(pdev);
pm_runtime_disable(&pdev->dev);
+ clk_disable_unprepare(isc->ispck);
+ clk_disable_unprepare(isc->hclock);
isc_subdev_cleanup(isc);
--
2.13.0
next prev parent reply other threads:[~2017-10-27 3:21 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-27 3:21 [PATCH v5 0/5] media: atmel-isc: Rework the format list and clock provider Wenyou Yang
2017-10-27 3:21 ` [PATCH v5 1/5] media: atmel-isc: Add spin lock for clock enable ops Wenyou Yang
2017-10-27 3:21 ` [PATCH v5 2/5] media: atmel-isc: Add prepare and unprepare ops Wenyou Yang
2017-10-27 3:21 ` Wenyou Yang [this message]
2017-10-27 3:21 ` [PATCH v5 4/5] media: atmel-isc: Remove unnecessary member Wenyou Yang
2017-10-27 3:21 ` [PATCH v5 5/5] media: atmel-isc: Rework the format list Wenyou Yang
2017-10-27 12:41 ` [PATCH v5 0/5] media: atmel-isc: Rework the format list and clock provider Hans Verkuil
2017-10-30 0:25 ` Yang, Wenyou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171027032132.16418-4-wenyou.yang@microchip.com \
--to=wenyou.yang@microchip.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).