From: cdall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 18/21] KVM: arm64: Handle RAS SErrors from EL1 on guest exit
Date: Tue, 31 Oct 2017 06:56:40 +0100 [thread overview]
Message-ID: <20171031055640.GW2166@lvm> (raw)
In-Reply-To: <20171019145807.23251-19-james.morse@arm.com>
On Thu, Oct 19, 2017 at 03:58:04PM +0100, James Morse wrote:
> We expect to have firmware-first handling of RAS SErrors, with errors
> notified via an APEI method. For systems without firmware-first, add
> some minimal handling to KVM.
>
> There are two ways KVM can take an SError due to a guest, either may be a
> RAS error: we exit the guest due to an SError routed to EL2 by HCR_EL2.AMO,
> or we take an SError from EL2 when we unmask PSTATE.A from __guest_exit.
>
> For SError that interrupt a guest and are routed to EL2 the existing
> behaviour is to inject an impdef SError into the guest.
>
> Add code to handle RAS SError based on the ESR. For uncontained errors
> arm64_is_blocking_ras_serror() will panic(), these errors compromise
> the host too. All other error types are contained: For the 'blocking'
> errors the vCPU can't make progress, so we inject a virtual SError.
> We ignore contained errors where we can make progress as if we're lucky,
> we may not hit them again.
>
> Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
> ---
> arch/arm64/kvm/handle_exit.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
> index 7debb74843a0..345fdbba6c2e 100644
> --- a/arch/arm64/kvm/handle_exit.c
> +++ b/arch/arm64/kvm/handle_exit.c
> @@ -28,12 +28,19 @@
> #include <asm/kvm_emulate.h>
> #include <asm/kvm_mmu.h>
> #include <asm/kvm_psci.h>
> +#include <asm/traps.h>
>
> #define CREATE_TRACE_POINTS
> #include "trace.h"
>
> typedef int (*exit_handle_fn)(struct kvm_vcpu *, struct kvm_run *);
>
> +static void kvm_handle_guest_serror(struct kvm_vcpu *vcpu, u32 esr)
> +{
> + if (!arm64_is_ras_serror(esr) || arm64_blocking_ras_serror(NULL, esr))
> + kvm_inject_vabt(vcpu);
> +}
> +
> static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run)
> {
> int ret;
> @@ -211,7 +218,7 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run,
> case ARM_EXCEPTION_IRQ:
> return 1;
> case ARM_EXCEPTION_EL1_SERROR:
> - kvm_inject_vabt(vcpu);
> + kvm_handle_guest_serror(vcpu, kvm_vcpu_get_hsr(vcpu));
> return 1;
> case ARM_EXCEPTION_TRAP:
> /*
> --
> 2.13.3
>
next prev parent reply other threads:[~2017-10-31 5:56 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-19 14:57 [PATCH v4 00/21] SError rework + RAS&IESB for firmware first support James Morse
2017-10-19 14:57 ` [PATCH v4 01/21] arm64: explicitly mask all exceptions James Morse
2017-10-19 14:57 ` [PATCH v4 02/21] arm64: introduce an order for exceptions James Morse
2017-10-19 14:57 ` [PATCH v4 03/21] arm64: Move the async/fiq helpers to explicitly set process context flags James Morse
2017-10-19 14:57 ` [PATCH v4 04/21] arm64: Mask all exceptions during kernel_exit James Morse
2017-10-19 14:57 ` [PATCH v4 05/21] arm64: entry.S: Remove disable_dbg James Morse
2017-10-19 14:57 ` [PATCH v4 06/21] arm64: entry.S: convert el1_sync James Morse
2017-10-19 14:57 ` [PATCH v4 07/21] arm64: entry.S convert el0_sync James Morse
2017-10-19 14:57 ` [PATCH v4 08/21] arm64: entry.S: convert elX_irq James Morse
2017-10-19 14:57 ` [PATCH v4 09/21] KVM: arm/arm64: mask/unmask daif around VHE guests James Morse
2017-10-30 7:40 ` Christoffer Dall
2017-11-02 12:14 ` James Morse
2017-11-03 12:45 ` Christoffer Dall
2017-11-03 17:19 ` James Morse
2017-11-06 12:42 ` Christoffer Dall
2017-10-19 14:57 ` [PATCH v4 10/21] arm64: entry.S: move SError handling into a C function for future expansion James Morse
2018-01-02 21:07 ` Adam Wallis
2018-01-03 16:00 ` James Morse
2017-10-19 14:57 ` [PATCH v4 11/21] arm64: cpufeature: Detect CPU RAS Extentions James Morse
2017-10-31 13:14 ` Will Deacon
2017-11-02 12:15 ` James Morse
2017-10-19 14:57 ` [PATCH v4 12/21] arm64: kernel: Survive corrected RAS errors notified by SError James Morse
2017-10-31 13:50 ` Will Deacon
2017-11-02 12:15 ` James Morse
2017-10-19 14:57 ` [PATCH v4 13/21] arm64: cpufeature: Enable IESB on exception entry/return for firmware-first James Morse
2017-10-31 13:56 ` Will Deacon
2017-10-19 14:58 ` [PATCH v4 14/21] arm64: kernel: Prepare for a DISR user James Morse
2017-10-19 14:58 ` [PATCH v4 15/21] KVM: arm64: Set an impdef ESR for Virtual-SError using VSESR_EL2 James Morse
2017-10-20 16:44 ` gengdongjiu
2017-10-23 15:26 ` James Morse
2017-10-24 9:53 ` gengdongjiu
2017-10-30 7:59 ` Christoffer Dall
2017-10-30 10:51 ` Christoffer Dall
2017-10-30 15:44 ` James Morse
2017-10-31 5:48 ` Christoffer Dall
2017-10-31 6:34 ` Marc Zyngier
2017-10-19 14:58 ` [PATCH v4 16/21] KVM: arm64: Save/Restore guest DISR_EL1 James Morse
2017-10-31 4:27 ` Marc Zyngier
2017-10-31 5:27 ` Christoffer Dall
2017-10-19 14:58 ` [PATCH v4 17/21] KVM: arm64: Save ESR_EL2 on guest SError James Morse
2017-10-31 4:26 ` Marc Zyngier
2017-10-31 5:47 ` Marc Zyngier
2017-11-01 17:42 ` James Morse
2017-10-19 14:58 ` [PATCH v4 18/21] KVM: arm64: Handle RAS SErrors from EL1 on guest exit James Morse
2017-10-31 5:55 ` Marc Zyngier
2017-10-31 5:56 ` Christoffer Dall [this message]
2017-10-19 14:58 ` [PATCH v4 19/21] KVM: arm64: Handle RAS SErrors from EL2 " James Morse
2017-10-27 6:26 ` gengdongjiu
2017-10-27 17:38 ` James Morse
2017-10-31 6:13 ` Marc Zyngier
2017-10-31 6:13 ` Christoffer Dall
2017-10-19 14:58 ` [PATCH v4 20/21] KVM: arm64: Take any host SError before entering the guest James Morse
2017-10-31 6:23 ` Christoffer Dall
2017-10-31 11:43 ` James Morse
2017-11-01 4:55 ` Christoffer Dall
2017-11-02 12:18 ` James Morse
2017-11-03 12:49 ` Christoffer Dall
2017-11-03 16:14 ` James Morse
2017-11-06 12:45 ` Christoffer Dall
2017-10-19 14:58 ` [PATCH v4 21/21] KVM: arm64: Trap RAS error registers and set HCR_EL2's TERR & TEA James Morse
2017-10-31 6:32 ` Christoffer Dall
2017-10-31 6:32 ` Marc Zyngier
2017-10-31 6:35 ` [PATCH v4 00/21] SError rework + RAS&IESB for firmware first support Christoffer Dall
2017-10-31 10:08 ` Will Deacon
2017-11-01 15:23 ` James Morse
2017-11-02 8:14 ` Christoffer Dall
2017-11-09 18:14 ` James Morse
2017-11-10 12:03 ` gengdongjiu
2017-11-13 11:29 ` Christoffer Dall
2017-11-13 13:05 ` Peter Maydell
2017-11-20 8:53 ` Christoffer Dall
2017-11-13 16:14 ` Andrew Jones
2017-11-13 17:56 ` Peter Maydell
2017-11-14 16:11 ` James Morse
2017-11-15 9:59 ` gengdongjiu
2017-11-14 16:03 ` James Morse
2017-11-15 9:15 ` gengdongjiu
2017-11-15 18:25 ` James Morse
2017-11-21 11:31 ` gengdongjiu
2017-11-20 8:55 ` Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171031055640.GW2166@lvm \
--to=cdall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).