From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Fri, 3 Nov 2017 09:44:27 +0100 Subject: [PATCH] ARM: sun7i: Add Cubietech Einstein A20 board device-tree In-Reply-To: <4661874.z7VF5iD9hg@donald> References: <20171102143534.19353-1-mailinglists@kunz-im-inter.net> <20171102155736.qab746tkaspfe47n@flea> <4661874.z7VF5iD9hg@donald> Message-ID: <20171103084427.rba6zc333fawbrv4@flea> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Frank, On Thu, Nov 02, 2017 at 07:59:04PM +0100, Frank Kunz wrote: > > > +&mmc2 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&mmc2_pins_a>; > > > + vmmc-supply = <®_vcc3v3>; > > > > What regulator is this connected to on the PMIC? > > Fixed, On the schematic it is finally connected to 3v0. Sorry, it wasn't really what I meant. Surely there's a PMIC regulator providing that 3.0V, you should put that regulator here. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: