Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: sebastian.reichel@collabora.co.uk (Sebastian Reichel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 7/7] arm: omap: pdata-quirks: Remove unused timer pdata
Date: Thu, 9 Nov 2017 17:29:02 +0100	[thread overview]
Message-ID: <20171109162902.gmqcznrvegvkwrrz@earth> (raw)
In-Reply-To: <1510144108-29563-8-git-send-email-j-keerthy@ti.com>

Hi,

On Wed, Nov 08, 2017 at 05:58:28PM +0530, Keerthy wrote:
> Remove unused timer pdata.
> 
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> ---
> 
> No code changes in this v2 version. Only enhanced patch
> statistics for renames.

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

-- Sebastian

>  arch/arm/mach-omap2/pdata-quirks.c | 32 --------------------------------
>  1 file changed, 32 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
> index ad9df86..e7d7fc7 100644
> --- a/arch/arm/mach-omap2/pdata-quirks.c
> +++ b/arch/arm/mach-omap2/pdata-quirks.c
> @@ -24,10 +24,8 @@
>  #include <linux/platform_data/hsmmc-omap.h>
>  #include <linux/platform_data/iommu-omap.h>
>  #include <linux/platform_data/wkup_m3.h>
> -#include <linux/platform_data/pwm_omap_dmtimer.h>
>  #include <linux/platform_data/media/ir-rx51.h>
>  #include <linux/platform_data/asoc-ti-mcbsp.h>
> -#include <clocksource/dmtimer.h>
>  
>  #include "common.h"
>  #include "common-board-devices.h"
> @@ -477,33 +475,6 @@ void omap_auxdata_legacy_init(struct device *dev)
>  	dev->platform_data = &twl_gpio_auxdata;
>  }
>  
> -/* Dual mode timer PWM callbacks platdata */
> -#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
> -static struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
> -	.request_by_node = omap_dm_timer_request_by_node,
> -	.request_specific = omap_dm_timer_request_specific,
> -	.request = omap_dm_timer_request,
> -	.set_source = omap_dm_timer_set_source,
> -	.get_irq = omap_dm_timer_get_irq,
> -	.set_int_enable = omap_dm_timer_set_int_enable,
> -	.set_int_disable = omap_dm_timer_set_int_disable,
> -	.free = omap_dm_timer_free,
> -	.enable = omap_dm_timer_enable,
> -	.disable = omap_dm_timer_disable,
> -	.get_fclk = omap_dm_timer_get_fclk,
> -	.start = omap_dm_timer_start,
> -	.stop = omap_dm_timer_stop,
> -	.set_load = omap_dm_timer_set_load,
> -	.set_match = omap_dm_timer_set_match,
> -	.set_pwm = omap_dm_timer_set_pwm,
> -	.set_prescaler = omap_dm_timer_set_prescaler,
> -	.read_counter = omap_dm_timer_read_counter,
> -	.write_counter = omap_dm_timer_write_counter,
> -	.read_status = omap_dm_timer_read_status,
> -	.write_status = omap_dm_timer_write_status,
> -};
> -#endif
> -
>  static struct ir_rx51_platform_data __maybe_unused rx51_ir_data = {
>  	.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
>  };
> @@ -572,9 +543,6 @@ static void __init omap3_mcbsp_init(void) {}
>  	OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
>  		       &wkup_m3_data),
>  #endif
> -#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
> -	OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata),
> -#endif
>  #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
>  	OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
>  		       &omap4_iommu_pdata),
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20171109/71320ddc/attachment.sig>

  reply	other threads:[~2017-11-09 16:29 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-08 12:28 [PATCH v2 0/7] omap: dmtimer: Move driver out of plat-omap Keerthy
2017-11-08 12:28 ` [PATCH v2 1/7] clocksource: dmtimer: Remove all the exports Keerthy
2017-11-09 16:13   ` Sebastian Reichel
2017-11-08 12:28 ` [PATCH v2 2/7] arm: omap: Move dmtimer.h out of plat-omap Keerthy
2017-11-08 16:42   ` Tony Lindgren
2017-11-09  4:25     ` Keerthy
2017-11-09  8:06       ` Keerthy
2017-11-09 14:52         ` Tony Lindgren
2017-11-09 16:16   ` Sebastian Reichel
2017-11-08 12:28 ` [PATCH v2 3/7] arm: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource Keerthy
2017-11-09 16:17   ` Sebastian Reichel
2017-11-08 12:28 ` [PATCH v2 4/7] dmtimer: Add timer ops to the platform data structure Keerthy
2017-11-09 16:27   ` Sebastian Reichel
2017-11-08 12:28 ` [PATCH v2 5/7] clocksource: dmtimer: Populate the timer ops to the pdata Keerthy
2017-11-09 16:28   ` Sebastian Reichel
2017-11-08 12:28 ` [PATCH v2 6/7] pwm: pwm-omap-dmtimer: Adapt driver to utilize dmtimer pdata ops Keerthy
2017-11-09 16:28   ` Sebastian Reichel
2017-11-09 21:15   ` Grygorii Strashko
2017-11-08 12:28 ` [PATCH v2 7/7] arm: omap: pdata-quirks: Remove unused timer pdata Keerthy
2017-11-09 16:29   ` Sebastian Reichel [this message]
2017-11-08 12:51 ` [PATCH v2 0/7] omap: dmtimer: Move driver out of plat-omap Ladislav Michl
2017-11-09  4:31   ` Keerthy
2017-11-09  4:41     ` Keerthy
2017-11-08 22:57 ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171109162902.gmqcznrvegvkwrrz@earth \
    --to=sebastian.reichel@collabora.co.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox