From: jan.glauber@caviumnetworks.com (Jan Glauber)
To: linux-arm-kernel@lists.infradead.org
Subject: RCU stall with high number of KVM vcpus
Date: Mon, 13 Nov 2017 18:35:52 +0100 [thread overview]
Message-ID: <20171113173552.GA13282@hc> (raw)
In-Reply-To: <2832f775-3cbe-d984-fe4f-e018642b6f1d@arm.com>
On Mon, Nov 13, 2017 at 01:47:38PM +0000, Marc Zyngier wrote:
> On 13/11/17 13:10, Jan Glauber wrote:
> > I'm seeing RCU stalls in the host with 4.14 when I run KVM on ARM64 (ThunderX2) with a high
> > number of vcpus (60). I only use one guest that does kernel compiles in
>
> Is that only reproducible on 4.14? With or without VHE? Can you
> reproduce this on another implementation (such as ThunderX-1)?
I've reproduced it on a distro 4.13 and several vanilla 4.14 rc's and
tip/locking. VHE is enabled. I've not yet tried to reproduce it with
older kernels or ThunderX-1. I can check if it happens also on ThunderX-1.
> > a loop. After some hours (less likely the more debugging options are
> > enabled, more likely with more vcpus) RCU stalls are happening in both host & guest.
> >
> > Both host & guest recover after some time, until the issue is triggered
> > again.
> >
> > Stack traces in the guest are next to useless, everything is messed up
> > there. The host seems to stave on kvm->mmu_lock spin lock, the lock_stat
>
> Please elaborate. Messed in what way? Corrupted? The guest crashing? Or
> is that a tooling issue?
Every vcpu that oopses prints one line in parallel, so I get blocks like:
[58880.179814] [<ffff000008084b98>] ret_from_fork+0x10/0x18
[58880.179834] [<ffff000008084b98>] ret_from_fork+0x10/0x18
[58880.179847] [<ffff000008084b98>] ret_from_fork+0x10/0x18
[58880.179873] [<ffff000008084b98>] ret_from_fork+0x10/0x18
[58880.179893] [<ffff000008084b98>] ret_from_fork+0x10/0x18
[58880.179911] [<ffff000008084b98>] ret_from_fork+0x10/0x18
[58880.179917] [<ffff000008084b98>] ret_from_fork+0x10/0x18
[58880.180288] [<ffff000008084b98>] ret_from_fork+0x10/0x18
[58880.180303] [<ffff000008084b98>] ret_from_fork+0x10/0x18
[58880.180336] [<ffff000008084b98>] ret_from_fork+0x10/0x18
[58880.180363] [<ffff000008084b98>] ret_from_fork+0x10/0x18
[58880.180384] [<ffff000008084b98>] ret_from_fork+0x10/0x18
[58880.180415] [<ffff000008084b98>] ret_from_fork+0x10/0x18
[58880.180461] [<ffff000008084b98>] ret_from_fork+0x10/0x18
I can send the full log if you want to have a look.
> > numbers don't look good, see waittime-max:
> >
> > -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> > class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
> > -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> >
> > &(&kvm->mmu_lock)->rlock: 99346764 99406604 0.14 1321260806.59 710654434972.0 7148.97 154228320 225122857 0.13 917688890.60 3705916481.39 16.46
> > ------------------------
> > &(&kvm->mmu_lock)->rlock 99365598 [<ffff0000080b43b8>] kvm_handle_guest_abort+0x4c0/0x950
> > &(&kvm->mmu_lock)->rlock 25164 [<ffff0000080a4e30>] kvm_mmu_notifier_invalidate_range_start+0x70/0xe8
> > &(&kvm->mmu_lock)->rlock 14934 [<ffff0000080a7eec>] kvm_mmu_notifier_invalidate_range_end+0x24/0x68
> > &(&kvm->mmu_lock)->rlock 908 [<ffff00000810a1f0>] __cond_resched_lock+0x68/0xb8
> > ------------------------
> > &(&kvm->mmu_lock)->rlock 3 [<ffff0000080b34c8>] stage2_flush_vm+0x60/0xd8
> > &(&kvm->mmu_lock)->rlock 99186296 [<ffff0000080b43b8>] kvm_handle_guest_abort+0x4c0/0x950
> > &(&kvm->mmu_lock)->rlock 179238 [<ffff0000080a4e30>] kvm_mmu_notifier_invalidate_range_start+0x70/0xe8
> > &(&kvm->mmu_lock)->rlock 19181 [<ffff0000080a7eec>] kvm_mmu_notifier_invalidate_range_end+0x24/0x68
> >
> > .............................................................................................................................................................................................................................
> [slots of stuff]
>
> Well, the mmu_lock is clearly contended. Is the box in a state where you
> are swapping? There seem to be as many faults as contentions, which is a
> bit surprising...
I don't think it is swapping but need to double check.
> Also, we recently moved arm64 to qrwlocks, which may have an impact.
> Care to give this[1] a go and report the result?
Sure, I that was my first suspision but I can reproduce the issue with
and without the qrwlock patches, so these are not to blame. Also, the
starving lock is a spinlock and not a qrwlock. So maybe the spinlocks
have fairness issues too?
--Jan
> Thanks,
>
> M.
>
> [1]: https://lkml.org/lkml/2017/10/12/266
> --
> Jazz is not dead. It just smells funny...
next prev parent reply other threads:[~2017-11-13 17:35 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20171113131000.GA10546@hc>
2017-11-13 13:47 ` RCU stall with high number of KVM vcpus Marc Zyngier
2017-11-13 17:35 ` Jan Glauber [this message]
2017-11-13 18:11 ` Marc Zyngier
2017-11-13 18:40 ` Jan Glauber
2017-11-14 13:30 ` Marc Zyngier
2017-11-14 14:19 ` Jan Glauber
2017-11-14 7:52 ` Jan Glauber
2017-11-14 8:49 ` Marc Zyngier
2017-11-14 11:34 ` Suzuki K Poulose
2017-11-13 18:13 ` Shameerali Kolothum Thodi
2017-11-14 7:49 ` Jan Glauber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171113173552.GA13282@hc \
--to=jan.glauber@caviumnetworks.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).