linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [RESEND PATCH] ARM: dts: ls1021a: Add support for QSPI with ls1021a SoC
@ 2017-09-12  6:49 SZ Lin
  2017-09-19  8:45 ` SZ Lin (林上智)
  2017-10-25 21:00 ` Li Yang
  0 siblings, 2 replies; 4+ messages in thread
From: SZ Lin @ 2017-09-12  6:49 UTC (permalink / raw)
  To: linux-arm-kernel

Add QSPI node support, and this function is disabled by default
This setting could be overwritten in board-level definitions

Signed-off-by: SZ Lin <sz.lin@moxa.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 7bb9df2c1460..9da876e47810 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -154,6 +154,20 @@
 			big-endian;
 		};
 
+		qspi: quadspi at 1550000 {
+			compatible = "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+			      <0x0 0x40000000 0x0 0x40000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
 		esdhc: esdhc at 1560000 {
 			compatible = "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
-- 
2.14.1

^ permalink raw reply related	[flat|nested] 4+ messages in thread

* [RESEND PATCH] ARM: dts: ls1021a: Add support for QSPI with ls1021a SoC
  2017-09-12  6:49 [RESEND PATCH] ARM: dts: ls1021a: Add support for QSPI with ls1021a SoC SZ Lin
@ 2017-09-19  8:45 ` SZ Lin (林上智)
  2017-10-25 21:00 ` Li Yang
  1 sibling, 0 replies; 4+ messages in thread
From: SZ Lin (林上智) @ 2017-09-19  8:45 UTC (permalink / raw)
  To: linux-arm-kernel

> Add QSPI node support, and this function is disabled by default This setting could be overwritten > in board-level definitions
> 
> Signed-off-by: SZ Lin <sz.lin@moxa.com>
> ---

This is a resend patch [1]. Any feedback would be greatly appreciated!

ref:
[1]: https://patchwork.kernel.org/patch/9889431/

Best regards,
SZ Lin

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [RESEND PATCH] ARM: dts: ls1021a: Add support for QSPI with ls1021a SoC
  2017-09-12  6:49 [RESEND PATCH] ARM: dts: ls1021a: Add support for QSPI with ls1021a SoC SZ Lin
  2017-09-19  8:45 ` SZ Lin (林上智)
@ 2017-10-25 21:00 ` Li Yang
  2017-11-16  7:33   ` Shawn Guo
  1 sibling, 1 reply; 4+ messages in thread
From: Li Yang @ 2017-10-25 21:00 UTC (permalink / raw)
  To: linux-arm-kernel

On Tue, Sep 12, 2017 at 1:49 AM, SZ Lin <sz.lin@moxa.com> wrote:
> Add QSPI node support, and this function is disabled by default
> This setting could be overwritten in board-level definitions

Adding Shawn Guo.

>
> Signed-off-by: SZ Lin <sz.lin@moxa.com>

Acked-by: Li Yang <leoyang.li@nxp.com>

> ---
>  arch/arm/boot/dts/ls1021a.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index 7bb9df2c1460..9da876e47810 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -154,6 +154,20 @@
>                         big-endian;
>                 };
>
> +               qspi: quadspi at 1550000 {
> +                       compatible = "fsl,ls1021a-qspi";
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <0x0 0x1550000 0x0 0x10000>,
> +                             <0x0 0x40000000 0x0 0x40000000>;
> +                       reg-names = "QuadSPI", "QuadSPI-memory";
> +                       interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> +                       clock-names = "qspi_en", "qspi";
> +                       clocks = <&clockgen 4 1>, <&clockgen 4 1>;
> +                       big-endian;
> +                       status = "disabled";
> +               };
> +
>                 esdhc: esdhc at 1560000 {
>                         compatible = "fsl,esdhc";
>                         reg = <0x0 0x1560000 0x0 0x10000>;
> --
> 2.14.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [RESEND PATCH] ARM: dts: ls1021a: Add support for QSPI with ls1021a SoC
  2017-10-25 21:00 ` Li Yang
@ 2017-11-16  7:33   ` Shawn Guo
  0 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2017-11-16  7:33 UTC (permalink / raw)
  To: linux-arm-kernel

On Wed, Oct 25, 2017 at 04:00:36PM -0500, Li Yang wrote:
> On Tue, Sep 12, 2017 at 1:49 AM, SZ Lin <sz.lin@moxa.com> wrote:
> > Add QSPI node support, and this function is disabled by default
> > This setting could be overwritten in board-level definitions
> 
> Adding Shawn Guo.
> 
> >
> > Signed-off-by: SZ Lin <sz.lin@moxa.com>
> 
> Acked-by: Li Yang <leoyang.li@nxp.com>

Applied, thanks.

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2017-11-16  7:33 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-09-12  6:49 [RESEND PATCH] ARM: dts: ls1021a: Add support for QSPI with ls1021a SoC SZ Lin
2017-09-19  8:45 ` SZ Lin (林上智)
2017-10-25 21:00 ` Li Yang
2017-11-16  7:33   ` Shawn Guo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).