From: linux@roeck-us.net (Guenter Roeck)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/2] ARM: dts: at91: disable the nxp,se97b SMBUS timeout on the TSE-850
Date: Thu, 30 Nov 2017 13:17:40 -0800 [thread overview]
Message-ID: <20171130211740.GA26784@roeck-us.net> (raw)
In-Reply-To: <acaea4f3-d273-444a-4df4-e6d1b35c876d@axentia.se>
On Thu, Nov 30, 2017 at 07:46:09PM +0100, Peter Rosin wrote:
> On 2017-11-30 18:26, Alexandre Belloni wrote:
> > On 30/11/2017 at 09:16:38 -0800, Guenter Roeck wrote:
> >> On Wed, Nov 29, 2017 at 09:56:29PM +0100, Alexandre Belloni wrote:
> >>> On 29/11/2017 at 12:53:11 -0800, Guenter Roeck wrote:
> >>>> On Mon, Nov 27, 2017 at 05:31:01PM +0100, Peter Rosin wrote:
> >>>>> The I2C adapter driver is sometimes slow, causing the SCL line to
> >>>>> be stuck low for more than the stipulated SMBUS timeout of 25-35 ms.
> >>>>> This causes the client device to give up which in turn causes silent
> >>>>> corruption of data. So, disable the SMBUS timeout in the client device.
> >>>>>
> >>>>> Signed-off-by: Peter Rosin <peda@axentia.se>
> >>>>
> >>>> Acked-by: Guenter Roeck <linux@roeck-us.net>
> >>>>
> >>>> I assume this will be sent upstream through an arm tree.
> >>>>
> >>>
> >>> Yes, I'm applying it right now.
> >>>
> >> Are you going to apply the patch for 4.15, or queue it up for 4.16 ?
> >> I have been arguing with myself if this is a feature or a bug fix.
> >> So far I queued the driver change up for 4.16, but I am open to
> >> applying it to 4.15. Any thoughts ?
> >>
> >
> > I was wondering that myself. I'm open to have it as a fix in 4.15. Or
> > maybe Peter can send the series to stable if he needs it in 4.14.
> >
> > Peter, what do you think/want?
>
> TL;DR Either way is fine.
>
> I think it's a bugfix; it fixes real problems where the application
> misbehave due to faulty content when reading from an eeprom. I'm
> expecting to make a new release for the hw in question RSN and these
> are the only local patches. So, it would be nice if they made it to
> 4.14.x before my release happens. However, it's not like it's difficult
> to rebase the patches should that backport not happen or take too long.
>
Good enough for me. I'll send it as a fix for v4.15, with Cc: stable.
Guenter
> The badness started to happen much more frequently due to some timing
> difference affecting the i2c bus driver, but in theory it's a problem
> that has been there from the start. I have just not noticed it before...
>
> Cheers,
> Peter
> --
> To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-11-30 21:17 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-27 16:30 [PATCH v2 0/2] Sluggish AT91 I2C driver causes SMBus timeouts Peter Rosin
2017-11-27 16:31 ` [PATCH v2 1/2] hwmon: (jc42) optionally try to disable the SMBUS timeout Peter Rosin
2017-11-27 16:48 ` Guenter Roeck
2017-11-28 15:01 ` Rob Herring
2017-11-29 20:52 ` [v2,1/2] " Guenter Roeck
2017-11-27 16:31 ` [PATCH v2 2/2] ARM: dts: at91: disable the nxp, se97b SMBUS timeout on the TSE-850 Peter Rosin
2017-11-29 20:53 ` [PATCH v2 2/2] ARM: dts: at91: disable the nxp,se97b " Guenter Roeck
2017-11-29 20:56 ` Alexandre Belloni
2017-11-30 17:16 ` Guenter Roeck
2017-11-30 17:26 ` Alexandre Belloni
2017-11-30 18:46 ` Peter Rosin
2017-11-30 21:17 ` Guenter Roeck [this message]
2017-12-04 19:39 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171130211740.GA26784@roeck-us.net \
--to=linux@roeck-us.net \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).