From mboxrd@z Thu Jan 1 00:00:00 1970 From: vigneshr@ti.com (Vignesh R) Date: Fri, 1 Dec 2017 11:43:09 +0530 Subject: [PATCH 2/4] dt-bindings: PCI: dra7xx: Add bindings for unaligned access in host mode In-Reply-To: <20171201061311.16691-1-vigneshr@ti.com> References: <20171201061311.16691-1-vigneshr@ti.com> Message-ID: <20171201061311.16691-3-vigneshr@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Update device tree binding documentation of TI's dra7xx PCI controller for enabling unaligned mem access as applicable not just in EP mode but in host mode as well. Signed-off-by: Vignesh R --- Documentation/devicetree/bindings/pci/ti-pci.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt index 7f7af3044016..452fe48c4fdd 100644 --- a/Documentation/devicetree/bindings/pci/ti-pci.txt +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt @@ -26,6 +26,11 @@ HOST MODE ranges, interrupt-map-mask, interrupt-map : as specified in ../designware-pcie.txt + - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument + should contain the register offset within syscon + and the 2nd argument should contain the bit field + for setting the bit to enable unaligned + access. DEVICE MODE =========== -- 2.15.0