From: cdall@kernel.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PULL 14/19] kvm: arm64: handle single-step of hyp emulated mmio instructions
Date: Mon, 4 Dec 2017 15:03:43 +0100 [thread overview]
Message-ID: <20171204140348.21965-12-cdall@kernel.org> (raw)
In-Reply-To: <20171204135637.21620-1-cdall@kernel.org>
From: Alex Benn?e <alex.bennee@linaro.org>
There is a fast-path of MMIO emulation inside hyp mode. The handling
of single-step is broadly the same as kvm_arm_handle_step_debug()
except we just setup ESR/HSR so handle_exit() does the correct thing
as we exit.
For the case of an emulated illegal access causing an SError we will
exit via the ARM_EXCEPTION_EL1_SERROR path in handle_exit(). We behave
as we would during a real SError and clear the DBG_SPSR_SS bit for the
emulated instruction.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Alex Benn?e <alex.bennee@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
---
arch/arm64/kvm/hyp/switch.c | 37 ++++++++++++++++++++++++++++++-------
1 file changed, 30 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 525c01f48867..f7c651f3a8c0 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -22,6 +22,7 @@
#include <asm/kvm_emulate.h>
#include <asm/kvm_hyp.h>
#include <asm/fpsimd.h>
+#include <asm/debug-monitors.h>
static bool __hyp_text __fpsimd_enabled_nvhe(void)
{
@@ -269,7 +270,11 @@ static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu)
return true;
}
-static void __hyp_text __skip_instr(struct kvm_vcpu *vcpu)
+/* Skip an instruction which has been emulated. Returns true if
+ * execution can continue or false if we need to exit hyp mode because
+ * single-step was in effect.
+ */
+static bool __hyp_text __skip_instr(struct kvm_vcpu *vcpu)
{
*vcpu_pc(vcpu) = read_sysreg_el2(elr);
@@ -282,6 +287,14 @@ static void __hyp_text __skip_instr(struct kvm_vcpu *vcpu)
}
write_sysreg_el2(*vcpu_pc(vcpu), elr);
+
+ if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) {
+ vcpu->arch.fault.esr_el2 =
+ (ESR_ELx_EC_SOFTSTP_LOW << ESR_ELx_EC_SHIFT) | 0x22;
+ return false;
+ } else {
+ return true;
+ }
}
int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu)
@@ -342,13 +355,21 @@ int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu)
int ret = __vgic_v2_perform_cpuif_access(vcpu);
if (ret == 1) {
- __skip_instr(vcpu);
- goto again;
+ if (__skip_instr(vcpu))
+ goto again;
+ else
+ exit_code = ARM_EXCEPTION_TRAP;
}
if (ret == -1) {
- /* Promote an illegal access to an SError */
- __skip_instr(vcpu);
+ /* Promote an illegal access to an
+ * SError. If we would be returning
+ * due to single-step clear the SS
+ * bit so handle_exit knows what to
+ * do after dealing with the error.
+ */
+ if (!__skip_instr(vcpu))
+ *vcpu_cpsr(vcpu) &= ~DBG_SPSR_SS;
exit_code = ARM_EXCEPTION_EL1_SERROR;
}
@@ -363,8 +384,10 @@ int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu)
int ret = __vgic_v3_perform_cpuif_access(vcpu);
if (ret == 1) {
- __skip_instr(vcpu);
- goto again;
+ if (__skip_instr(vcpu))
+ goto again;
+ else
+ exit_code = ARM_EXCEPTION_TRAP;
}
/* 0 falls through to be handled out of EL2 */
--
2.14.2
next prev parent reply other threads:[~2017-12-04 14:03 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-04 13:56 [PULL 00/19] KVM/ARM Fixes for v4.15 Christoffer Dall
2017-12-04 13:56 ` [PULL 01/19] KVM: arm/arm64: Don't enable/disable physical timer access on VHE Christoffer Dall
2017-12-04 13:56 ` [PULL 02/19] KVM: arm/arm64: VGIC: extend !vgic_is_initialized guard Christoffer Dall
2017-12-04 14:03 ` [PULL 03/19] KVM: arm/arm64: vgic-irqfd: Fix MSI entry allocation Christoffer Dall
2017-12-04 14:03 ` [PULL 04/19] KVM: arm/arm64: vgic: Preserve the revious read from the pending table Christoffer Dall
2017-12-04 14:03 ` [PULL 05/19] KVM: arm/arm64: vgic-its: " Christoffer Dall
2017-12-04 14:03 ` [PULL 06/19] KVM: arm/arm64: vgic-its: Check result of allocation before use Christoffer Dall
2017-12-04 14:03 ` [PULL 07/19] KVM: arm/arm64: vgic-v4: Only perform an unmap for valid vLPIs Christoffer Dall
2017-12-04 14:03 ` [PULL 08/19] arm64: KVM: fix VTTBR_BADDR_MASK BUG_ON off-by-one Christoffer Dall
2017-12-04 14:03 ` [PULL 09/19] arm: KVM: Fix " Christoffer Dall
2017-12-04 14:03 ` [PULL 10/19] KVM: arm/arm64: debug: Introduce helper for single-step Christoffer Dall
2017-12-04 14:03 ` [PULL 11/19] kvm: arm64: handle single-stepping trapped instructions Christoffer Dall
2017-12-04 14:03 ` [PULL 12/19] kvm: arm64: handle single-step of userspace mmio instructions Christoffer Dall
2017-12-04 14:03 ` [PULL 13/19] kvm: arm64: handle single-step during SError exceptions Christoffer Dall
2017-12-04 14:03 ` Christoffer Dall [this message]
2017-12-04 14:03 ` [PULL 15/19] KVM: arm/arm64: Avoid attempting to load timer vgic state without a vgic Christoffer Dall
2017-12-04 14:03 ` [PULL 16/19] kvm: arm: don't treat unavailable HYP mode as an error Christoffer Dall
2017-12-04 14:03 ` [PULL 17/19] KVM: arm/arm64: Fix spinlock acquisition in vgic_set_owner Christoffer Dall
2017-12-04 14:03 ` [PULL 18/19] KVM: arm/arm64: kvm_arch_destroy_vm cleanups Christoffer Dall
2017-12-04 14:03 ` [PULL 19/19] KVM: arm/arm64: Fix broken GICH_ELRSR big endian conversion Christoffer Dall
2017-12-05 17:59 ` [PULL 00/19] KVM/ARM Fixes for v4.15 Radim Krčmář
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171204140348.21965-12-cdall@kernel.org \
--to=cdall@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).