From mboxrd@z Thu Jan 1 00:00:00 1970 From: tyler@opensourcefoundries.com (tyler at opensourcefoundries.com) Date: Tue, 5 Dec 2017 14:27:01 -0800 Subject: [PATCH v1 0/6] ARM: dts: introduce Compulab IoT Gateway Message-ID: <20171205222707.11302-1-tyler@opensourcefoundries.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Tyler Baker The Compulab IoT Gateway is based on an NXP i.MX7D, dual core Cortex-A7 clocking at 1GHz. It supports up to 2GB of DDR3, and 32GB of eMMC flash. Onboard, there are two gigabit ethernet controllers, 4 x USB2, RS485, and CAN. It uses the same SoM as the cl-som-imx7, but includes a baseboard with additional I/O. Compulab has provided patches for this platform based on v4.1. I've used these patches as reference to get things working on tip. Changes for v1 (Requested by Fabio) * Squashed the dts build into the initial patch * Dropped the phy refclk patch from this series, submitting to PCI list * Removed fsl,spi-num-chipselects property * Removed LCD and DVI nodes, will follow up with a later series * s/fsl,uart-has-rtscts/uart-has-rtscts/g * Fixed regulator usage inside of simple-bus The entire series is based on v4.15-rc2. Tyler Baker (6): ARM: dts: imx7d-sbc-iot: add initial iot gateway dts ARM: dts: imx7d-cl-som: add nodes for usbh, and usbotg2 ARM: dts: imx7s: add dma support ARM: dts: imx7s: add node and supplies for vdd1p2 ARM: dts: imx7d-sbc-iot: enable PCIe peripheral ARM: dts: imx7s: add usb hsic phy domain arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 34 +++++-- arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts | 169 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx7s.dtsi | 29 +++++- 4 files changed, 225 insertions(+), 8 deletions(-) create mode 100644 arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts -- 2.9.3