From: ard.biesheuvel@linaro.org (Ard Biesheuvel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 12/20] crypto: arm64/sha1-ce - yield NEON after every block of input
Date: Wed, 6 Dec 2017 19:43:38 +0000 [thread overview]
Message-ID: <20171206194346.24393-13-ard.biesheuvel@linaro.org> (raw)
In-Reply-To: <20171206194346.24393-1-ard.biesheuvel@linaro.org>
Avoid excessive scheduling delays under a preemptible kernel by
yielding the NEON after every block of input.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm64/crypto/sha1-ce-core.S | 42 ++++++++++++++------
1 file changed, 29 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/crypto/sha1-ce-core.S b/arch/arm64/crypto/sha1-ce-core.S
index 8550408735a0..3139206e8787 100644
--- a/arch/arm64/crypto/sha1-ce-core.S
+++ b/arch/arm64/crypto/sha1-ce-core.S
@@ -70,31 +70,37 @@
* int blocks)
*/
ENTRY(sha1_ce_transform)
+ frame_push 3
+
+ mov x19, x0
+ mov x20, x1
+ mov x21, x2
+
/* load round constants */
- adr x6, .Lsha1_rcon
+0: adr x6, .Lsha1_rcon
ld1r {k0.4s}, [x6], #4
ld1r {k1.4s}, [x6], #4
ld1r {k2.4s}, [x6], #4
ld1r {k3.4s}, [x6]
/* load state */
- ld1 {dgav.4s}, [x0]
- ldr dgb, [x0, #16]
+ ld1 {dgav.4s}, [x19]
+ ldr dgb, [x19, #16]
/* load sha1_ce_state::finalize */
ldr_l w4, sha1_ce_offsetof_finalize, x4
- ldr w4, [x0, x4]
+ ldr w4, [x19, x4]
/* load input */
-0: ld1 {v8.4s-v11.4s}, [x1], #64
- sub w2, w2, #1
+1: ld1 {v8.4s-v11.4s}, [x20], #64
+ sub w21, w21, #1
CPU_LE( rev32 v8.16b, v8.16b )
CPU_LE( rev32 v9.16b, v9.16b )
CPU_LE( rev32 v10.16b, v10.16b )
CPU_LE( rev32 v11.16b, v11.16b )
-1: add t0.4s, v8.4s, k0.4s
+2: add t0.4s, v8.4s, k0.4s
mov dg0v.16b, dgav.16b
add_update c, ev, k0, 8, 9, 10, 11, dgb
@@ -125,16 +131,25 @@ CPU_LE( rev32 v11.16b, v11.16b )
add dgbv.2s, dgbv.2s, dg1v.2s
add dgav.4s, dgav.4s, dg0v.4s
- cbnz w2, 0b
+ cbz w21, 3f
+
+ if_will_cond_yield_neon
+ st1 {dgav.4s}, [x19]
+ str dgb, [x19, #16]
+ do_cond_yield_neon
+ b 0b
+ endif_yield_neon
+
+ b 1b
/*
* Final block: add padding and total bit count.
* Skip if the input size was not a round multiple of the block size,
* the padding is handled by the C code in that case.
*/
- cbz x4, 3f
+3: cbz x4, 4f
ldr_l w4, sha1_ce_offsetof_count, x4
- ldr x4, [x0, x4]
+ ldr x4, [x19, x4]
movi v9.2d, #0
mov x8, #0x80000000
movi v10.2d, #0
@@ -143,10 +158,11 @@ CPU_LE( rev32 v11.16b, v11.16b )
mov x4, #0
mov v11.d[0], xzr
mov v11.d[1], x7
- b 1b
+ b 2b
/* store new state */
-3: st1 {dgav.4s}, [x0]
- str dgb, [x0, #16]
+4: st1 {dgav.4s}, [x19]
+ str dgb, [x19, #16]
+ frame_pop 3
ret
ENDPROC(sha1_ce_transform)
--
2.11.0
next prev parent reply other threads:[~2017-12-06 19:43 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-06 19:43 [PATCH v3 00/20] crypto: arm64 - play nice with CONFIG_PREEMPT Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 01/20] crypto: testmgr - add a new test case for CRC-T10DIF Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 02/20] crypto: arm64/aes-ce-ccm - move kernel mode neon en/disable into loop Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 03/20] crypto: arm64/aes-blk " Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 04/20] crypto: arm64/aes-bs " Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 05/20] crypto: arm64/chacha20 " Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 06/20] crypto: arm64/aes-blk - remove configurable interleave Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 07/20] crypto: arm64/aes-blk - add 4 way interleave to CBC encrypt path Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 08/20] crypto: arm64/aes-blk - add 4 way interleave to CBC-MAC " Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 09/20] crypto: arm64/sha256-neon - play nice with CONFIG_PREEMPT kernels Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 10/20] arm64: assembler: add utility macros to push/pop stack frames Ard Biesheuvel
2017-12-07 14:11 ` Dave Martin
2017-12-07 14:21 ` Ard Biesheuvel
2017-12-07 14:53 ` Dave Martin
2017-12-07 14:58 ` Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 11/20] arm64: assembler: add macros to conditionally yield the NEON under PREEMPT Ard Biesheuvel
2017-12-07 14:39 ` Dave Martin
2017-12-07 14:50 ` Ard Biesheuvel
2017-12-07 15:47 ` Ard Biesheuvel
2017-12-07 15:51 ` Ard Biesheuvel
2017-12-07 16:15 ` Dave Martin
2017-12-07 16:11 ` Dave Martin
2017-12-06 19:43 ` Ard Biesheuvel [this message]
2017-12-06 19:43 ` [PATCH v3 13/20] crypto: arm64/sha2-ce - yield NEON after every block of input Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 14/20] crypto: arm64/aes-ccm " Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 15/20] crypto: arm64/aes-blk " Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 16/20] crypto: arm64/aes-bs " Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 17/20] crypto: arm64/aes-ghash " Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 18/20] crypto: arm64/crc32-ce " Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 19/20] crypto: arm64/crct10dif-ce " Ard Biesheuvel
2017-12-06 19:43 ` [PATCH v3 20/20] DO NOT MERGE Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171206194346.24393-13-ard.biesheuvel@linaro.org \
--to=ard.biesheuvel@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).