From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Thu, 7 Dec 2017 10:03:11 +0100 Subject: [PATCH v2] ARM: dts: sun8i: h3: enable USB OTG for NanoPi Neo board In-Reply-To: <20171205220358.GA28161@t440.localdomain> References: <20171205090706.et5a7dizkhn6auje@flea.lan> <20171205220358.GA28161@t440.localdomain> Message-ID: <20171207090311.deat4rvbthye4b52@flea.lan> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Dec 05, 2017 at 11:03:58PM +0100, Krzysztof Adamski wrote: > Similarly to Orange Pi Zero, NanoPi Neo board has an USB OTG port with > an ID pin but with unpowered VBUS. This patch enables this port in > forced peripheral mode. > > ohci/ehci nodes are still enabled since the host mode may work if > external power source is used. In that case, the mode can be switched > for example via sysfs. The same strategy is used for Orange Pi Zero > board DTS. > > Signed-off-by: Krzysztof Adamski Applied, thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: