From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Mon, 11 Dec 2017 08:18:01 +0100 Subject: [PATCH 3/5] arm: dts: sun8i: a83t: a711: Enable I2C0 In-Reply-To: <20171208215419.30396-4-mylene.josserand@free-electrons.com> References: <20171208215419.30396-1-mylene.josserand@free-electrons.com> <20171208215419.30396-4-mylene.josserand@free-electrons.com> Message-ID: <20171211071801.ekdzbimk5nvlvekr@flea.lan> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, On Fri, Dec 08, 2017 at 10:54:17PM +0100, Myl?ne Josserand wrote: > The A711 has a touchscreen connected by I2C0. > Enable only I2C0 node for the moment. > > Signed-off-by: Myl?ne Josserand > --- > arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts > index a021ee6da396..84cca1a48cea 100644 > --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts > +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts > @@ -105,6 +105,13 @@ > status = "okay"; > }; > > +&i2c0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0_pins>; If there's only one set of pins, maybe we should force that muxing in the DTSI? Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: