From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 01/36] KVM: arm64: Avoid storing the vcpu pointer on the stack
Date: Mon, 11 Dec 2017 10:30:31 +0100 [thread overview]
Message-ID: <20171211093031.GF910@cbox> (raw)
In-Reply-To: <868tebstsi.wl-marc.zyngier@arm.com>
On Sat, Dec 09, 2017 at 05:19:41PM +0000, Marc Zyngier wrote:
> On Thu, 07 Dec 2017 17:05:55 +0000,
> Christoffer Dall wrote:
> >
> > We already have the percpu area for the host cpu state, which points to
> > the VCPU, so there's no need to store the VCPU pointer on the stack on
> > every context switch. We can be a little more clever and just use
> > tpidr_el2 for the percpu offset and load the VCPU pointer from the host
> > context.
> >
> > This does require us to calculate the percpu offset without including
> > the offset from the kernel mapping of the percpu array to the linaro
>
> "linaro"?
>
*linear* - spell check must have played a trick on me.
> > mapping of the array (which is what we store in tpidr_el1), because a
> > PC-relative generated address in EL2 is already giving us the hyp alias
> > of the linear mapping of a kernel address. We do this in
> > __cpu_init_hyp_mode() by using kvm_ksym_ref().
> >
> > This change also requires us to have a scratch register, so we take the
> > chance to rearrange some of the el1_sync code to only look at the
> > vttbr_el2 to determine if this is a trap from the guest or an HVC from
> > the host. We do add an extra check to call the panic code if the kernel
> > is configured with debugging enabled and we saw a trap from the host
> > which wasn't an HVC, indicating that we left some EL2 trap configured by
> > mistake.
> >
> > The code that accesses ESR_EL2 was previously using an alternative to
> > use the _EL1 accessor on VHE systems, but this was actually unnecessary
> > as the _EL1 accessor aliases the ESR_EL2 register on VHE, and the _EL2
> > accessor does the same thing on both systems.
> >
> > Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> > Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
> > ---
> >
> > Notes:
> > Changes since v1:
> > - Use PC-relative addressing to access per-cpu variables instead of
> > using a load from the literal pool.
> > - Remove stale comments as pointed out by Marc
> > - Reworded the commit message as suggested by Drew
> >
> > arch/arm64/include/asm/kvm_asm.h | 15 ++++++++++++++
> > arch/arm64/include/asm/kvm_host.h | 15 ++++++++++++++
> > arch/arm64/kernel/asm-offsets.c | 1 +
> > arch/arm64/kvm/hyp/entry.S | 6 +-----
> > arch/arm64/kvm/hyp/hyp-entry.S | 41 ++++++++++++++++++---------------------
> > arch/arm64/kvm/hyp/switch.c | 5 +----
> > arch/arm64/kvm/hyp/sysreg-sr.c | 5 +++++
> > 7 files changed, 57 insertions(+), 31 deletions(-)
> >
> > diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
> > index ab4d0a926043..33e0edc6f8be 100644
> > --- a/arch/arm64/include/asm/kvm_asm.h
> > +++ b/arch/arm64/include/asm/kvm_asm.h
> > @@ -33,6 +33,7 @@
> > #define KVM_ARM64_DEBUG_DIRTY_SHIFT 0
> > #define KVM_ARM64_DEBUG_DIRTY (1 << KVM_ARM64_DEBUG_DIRTY_SHIFT)
> >
> > +/* Translate a kernel address of @sym into its equivalent linear mapping */
> > #define kvm_ksym_ref(sym) \
> > ({ \
> > void *val = &sym; \
> > @@ -70,4 +71,18 @@ extern u32 __init_stage2_translation(void);
> >
> > #endif
> >
> > +#ifdef __ASSEMBLY__
>
> You could turn this and the previous #endif into a simple #else.
>
yup
> > +.macro get_host_ctxt reg, tmp
> > + adr_l \reg, kvm_host_cpu_state
> > + mrs \tmp, tpidr_el2
> > + add \reg, \reg, \tmp
> > +.endm
> > +
> > +.macro get_vcpu vcpu, ctxt
> > + ldr \vcpu, [\ctxt, #HOST_CONTEXT_VCPU]
> > + kern_hyp_va \vcpu
> > +.endm
> > +
> > +#endif
> > +
> > #endif /* __ARM_KVM_ASM_H__ */
> > diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> > index 7ee72b402907..af58deb6ec3c 100644
> > --- a/arch/arm64/include/asm/kvm_host.h
> > +++ b/arch/arm64/include/asm/kvm_host.h
> > @@ -348,10 +348,15 @@ int kvm_perf_teardown(void);
> >
> > struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr);
> >
> > +extern void __kvm_set_tpidr_el2(u64 tpidr_el2);
>
> Is there any advantage in having this prototype in kvm_host.h, instead
> of putting it in kvm_hyp.h (which feels more appropriate)?
>
asm-offsets.c pukes all over the place and I can't include asm/kvm_hyp.h
from kvm_host.h, because it depends on kvm_host.h, and I can't include
asm/kvm_hyp.h easily in asm-offsets.c because it pukes again from all
sorts of other missing things.
If you care strongly about this point, I can try to dig deeper in this
or refactor this somehow more substantially. Ideas?
> > +DECLARE_PER_CPU(kvm_cpu_context_t, kvm_host_cpu_state);
> > +
> > static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr,
> > unsigned long hyp_stack_ptr,
> > unsigned long vector_ptr)
> > {
> > + u64 tpidr_el2;
> > +
> > /*
> > * Call initialization code, and switch to the full blown HYP code.
> > * If the cpucaps haven't been finalized yet, something has gone very
> > @@ -360,6 +365,16 @@ static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr,
> > */
> > BUG_ON(!static_branch_likely(&arm64_const_caps_ready));
> > __kvm_call_hyp((void *)pgd_ptr, hyp_stack_ptr, vector_ptr);
> > +
> > + /*
> > + * Calculate the raw per-cpu offset without a translation from the
> > + * kernel's mapping to the linear mapping, and store it in tpidr_el2
> > + * so that we can use adr_l to access per-cpu variables in EL2.
> > + */
> > + tpidr_el2 = (u64)this_cpu_ptr(&kvm_host_cpu_state)
> > + - (u64)kvm_ksym_ref(kvm_host_cpu_state);
> > +
> > + kvm_call_hyp(__kvm_set_tpidr_el2, tpidr_el2);
> > }
> >
> > static inline void kvm_arch_hardware_unsetup(void) {}
> > diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
> > index 71bf088f1e4b..612021dce84f 100644
> > --- a/arch/arm64/kernel/asm-offsets.c
> > +++ b/arch/arm64/kernel/asm-offsets.c
> > @@ -135,6 +135,7 @@ int main(void)
> > DEFINE(CPU_FP_REGS, offsetof(struct kvm_regs, fp_regs));
> > DEFINE(VCPU_FPEXC32_EL2, offsetof(struct kvm_vcpu, arch.ctxt.sys_regs[FPEXC32_EL2]));
> > DEFINE(VCPU_HOST_CONTEXT, offsetof(struct kvm_vcpu, arch.host_cpu_context));
> > + DEFINE(HOST_CONTEXT_VCPU, offsetof(struct kvm_cpu_context, __hyp_running_vcpu));
> > #endif
> > #ifdef CONFIG_CPU_PM
> > DEFINE(CPU_SUSPEND_SZ, sizeof(struct cpu_suspend_ctx));
> > diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S
> > index 9a8ab5dddd9e..a360ac6e89e9 100644
> > --- a/arch/arm64/kvm/hyp/entry.S
> > +++ b/arch/arm64/kvm/hyp/entry.S
> > @@ -62,9 +62,6 @@ ENTRY(__guest_enter)
> > // Store the host regs
> > save_callee_saved_regs x1
> >
> > - // Store host_ctxt and vcpu for use at exit time
> > - stp x1, x0, [sp, #-16]!
> > -
> > add x18, x0, #VCPU_CONTEXT
> >
> > // Restore guest regs x0-x17
> > @@ -118,8 +115,7 @@ ENTRY(__guest_exit)
> > // Store the guest regs x19-x29, lr
> > save_callee_saved_regs x1
> >
> > - // Restore the host_ctxt from the stack
> > - ldr x2, [sp], #16
> > + get_host_ctxt x2, x3
> >
> > // Now restore the host regs
> > restore_callee_saved_regs x2
> > diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S
> > index e4f37b9dd47c..71b4cc92895e 100644
> > --- a/arch/arm64/kvm/hyp/hyp-entry.S
> > +++ b/arch/arm64/kvm/hyp/hyp-entry.S
> > @@ -56,18 +56,15 @@ ENDPROC(__vhe_hyp_call)
> > el1_sync: // Guest trapped into EL2
> > stp x0, x1, [sp, #-16]!
> >
> > -alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
> > - mrs x1, esr_el2
> > -alternative_else
> > - mrs x1, esr_el1
> > -alternative_endif
> > - lsr x0, x1, #ESR_ELx_EC_SHIFT
> > + mrs x1, vttbr_el2 // If vttbr is valid, this is a trap
> > + cbnz x1, el1_trap // from the guest
> >
> > - cmp x0, #ESR_ELx_EC_HVC64
> > - b.ne el1_trap
> > -
> > - mrs x1, vttbr_el2 // If vttbr is valid, the 64bit guest
> > - cbnz x1, el1_trap // called HVC
> > +#ifdef CONFIG_DEBUG
> > + mrs x0, esr_el2
> > + lsr x0, x0, #ESR_ELx_EC_SHIFT
> > + cmp x0, #ESR_ELx_EC_HVC64
> > + b.ne __hyp_panic
> > +#endif
> >
> > /* Here, we're pretty sure the host called HVC. */
> > ldp x0, x1, [sp], #16
> > @@ -101,10 +98,15 @@ alternative_endif
> > eret
> >
> > el1_trap:
> > + get_host_ctxt x0, x1
> > + get_vcpu x1, x0
> > +
> > + mrs x0, esr_el2
> > + lsr x0, x0, #ESR_ELx_EC_SHIFT
> > /*
> > * x0: ESR_EC
> > + * x1: vcpu pointer
> > */
> > - ldr x1, [sp, #16 + 8] // vcpu stored by __guest_enter
> >
> > /*
> > * We trap the first access to the FP/SIMD to save the host context
> > @@ -122,13 +124,15 @@ alternative_else_nop_endif
> >
> > el1_irq:
> > stp x0, x1, [sp, #-16]!
> > - ldr x1, [sp, #16 + 8]
> > + get_host_ctxt x0, x1
> > + get_vcpu x1, x0
> > mov x0, #ARM_EXCEPTION_IRQ
> > b __guest_exit
> >
> > el1_error:
> > stp x0, x1, [sp, #-16]!
> > - ldr x1, [sp, #16 + 8]
> > + get_host_ctxt x0, x1
> > + get_vcpu x1, x0
> > mov x0, #ARM_EXCEPTION_EL1_SERROR
> > b __guest_exit
> >
> > @@ -164,14 +168,7 @@ ENTRY(__hyp_do_panic)
> > ENDPROC(__hyp_do_panic)
> >
> > ENTRY(__hyp_panic)
> > - /*
> > - * '=kvm_host_cpu_state' is a host VA from the constant pool, it may
> > - * not be accessible by this address from EL2, hyp_panic() converts
> > - * it with kern_hyp_va() before use.
> > - */
> > - ldr x0, =kvm_host_cpu_state
> > - mrs x1, tpidr_el2
> > - add x0, x0, x1
> > + get_host_ctxt x0, x1
> > b hyp_panic
> > ENDPROC(__hyp_panic)
> >
> > diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> > index f7307b6b42f0..6fcb37e220b5 100644
> > --- a/arch/arm64/kvm/hyp/switch.c
> > +++ b/arch/arm64/kvm/hyp/switch.c
> > @@ -449,7 +449,7 @@ static hyp_alternate_select(__hyp_call_panic,
> > __hyp_call_panic_nvhe, __hyp_call_panic_vhe,
> > ARM64_HAS_VIRT_HOST_EXTN);
> >
> > -void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *__host_ctxt)
> > +void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *host_ctxt)
> > {
> > struct kvm_vcpu *vcpu = NULL;
> >
> > @@ -458,9 +458,6 @@ void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *__host_ctxt)
> > u64 par = read_sysreg(par_el1);
> >
> > if (read_sysreg(vttbr_el2)) {
> > - struct kvm_cpu_context *host_ctxt;
> > -
> > - host_ctxt = kern_hyp_va(__host_ctxt);
> > vcpu = host_ctxt->__hyp_running_vcpu;
> > __timer_disable_traps(vcpu);
> > __deactivate_traps(vcpu);
> > diff --git a/arch/arm64/kvm/hyp/sysreg-sr.c b/arch/arm64/kvm/hyp/sysreg-sr.c
> > index c54cc2afb92b..e19d89cabf2a 100644
> > --- a/arch/arm64/kvm/hyp/sysreg-sr.c
> > +++ b/arch/arm64/kvm/hyp/sysreg-sr.c
> > @@ -183,3 +183,8 @@ void __hyp_text __sysreg32_restore_state(struct kvm_vcpu *vcpu)
> > if (vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY)
> > write_sysreg(sysreg[DBGVCR32_EL2], dbgvcr32_el2);
> > }
> > +
> > +void __hyp_text __kvm_set_tpidr_el2(u64 tpidr_el2)
> > +{
> > + asm("msr tpidr_el2, %0": : "r" (tpidr_el2));
> > +}
> > --
> > 2.14.2
> >
>
> Other than the couple of nits above:
>
> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
>
Thanks!
-Christoffer
next prev parent reply other threads:[~2017-12-11 9:30 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-07 17:05 [PATCH v2 00/36] Optimize KVM/ARM for VHE systems Christoffer Dall
2017-12-07 17:05 ` [PATCH v2 01/36] KVM: arm64: Avoid storing the vcpu pointer on the stack Christoffer Dall
2017-12-09 17:19 ` Marc Zyngier
2017-12-11 9:30 ` Christoffer Dall [this message]
2017-12-11 9:35 ` Marc Zyngier
2017-12-07 17:05 ` [PATCH v2 02/36] KVM: arm64: Rework hyp_panic for VHE and non-VHE Christoffer Dall
2017-12-09 17:24 ` Marc Zyngier
2017-12-07 17:05 ` [PATCH v2 03/36] KVM: arm64: Move HCR_INT_OVERRIDE to default HCR_EL2 guest flag Christoffer Dall
2017-12-07 17:05 ` [PATCH v2 04/36] KVM: arm/arm64: Get rid of vcpu->arch.irq_lines Christoffer Dall
2017-12-07 17:05 ` [PATCH v2 05/36] KVM: arm/arm64: Add kvm_vcpu_load_sysregs and kvm_vcpu_put_sysregs Christoffer Dall
2017-12-09 17:30 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 06/36] KVM: arm64: Defer restoring host VFP state to vcpu_put Christoffer Dall
2017-12-09 17:37 ` Marc Zyngier
2017-12-11 9:31 ` Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 07/36] KVM: arm64: Move debug dirty flag calculation out of world switch Christoffer Dall
2017-12-09 19:20 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 08/36] KVM: arm64: Slightly improve debug save/restore functions Christoffer Dall
2017-12-09 19:37 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 09/36] KVM: arm64: Improve debug register save/restore flow Christoffer Dall
2017-12-11 9:40 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 10/36] KVM: arm64: Factor out fault info population and gic workarounds Christoffer Dall
2017-12-11 9:45 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 11/36] KVM: arm64: Introduce VHE-specific kvm_vcpu_run Christoffer Dall
2017-12-11 9:53 ` Marc Zyngier
2017-12-14 12:12 ` Christoffer Dall
2017-12-14 12:17 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 12/36] KVM: arm64: Remove kern_hyp_va() use in VHE switch function Christoffer Dall
2017-12-11 9:54 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 13/36] KVM: arm64: Don't deactivate VM on VHE systems Christoffer Dall
2017-12-11 9:58 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 14/36] KVM: arm64: Remove noop calls to timer save/restore from VHE switch Christoffer Dall
2017-12-11 10:02 ` Marc Zyngier
2017-12-14 12:30 ` Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 15/36] KVM: arm64: Move userspace system registers into separate function Christoffer Dall
2017-12-11 10:14 ` Marc Zyngier
2017-12-14 12:53 ` Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 16/36] KVM: arm64: Rewrite sysreg alternatives to static keys Christoffer Dall
2017-12-11 10:15 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 17/36] KVM: arm64: Introduce separate VHE/non-VHE sysreg save/restore functions Christoffer Dall
2017-12-11 10:22 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 18/36] KVM: arm/arm64: Remove leftover comment from kvm_vcpu_run_vhe Christoffer Dall
2017-12-11 10:30 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 19/36] KVM: arm64: Unify non-VHE host/guest sysreg save and restore functions Christoffer Dall
2017-12-11 10:40 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 20/36] KVM: arm64: Don't save the host ELR_EL2 and SPSR_EL2 on VHE systems Christoffer Dall
2017-12-11 10:44 ` Marc Zyngier
2017-12-14 13:46 ` Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 21/36] KVM: arm64: Change 32-bit handling of VM system registers Christoffer Dall
2017-12-11 10:57 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 22/36] KVM: arm64: Prepare to handle traps on deferred VM sysregs Christoffer Dall
2017-12-11 11:10 ` Marc Zyngier
2017-12-11 11:24 ` Christoffer Dall
2017-12-11 11:46 ` Marc Zyngier
2017-12-12 13:08 ` Marc Zyngier
2017-12-12 15:46 ` Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 23/36] KVM: arm64: Prepare to handle traps on deferred EL0 sysregs Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 24/36] KVM: arm64: Prepare to handle traps on remaining deferred EL1 sysregs Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 25/36] KVM: arm64: Prepare to handle traps on deferred AArch32 sysregs Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 26/36] KVM: arm64: Defer saving/restoring system registers to vcpu load/put on VHE Christoffer Dall
2017-12-11 13:20 ` Marc Zyngier
2017-12-15 16:29 ` Christoffer Dall
2017-12-29 16:39 ` Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 27/36] KVM: arm64: Move common VHE/non-VHE trap config in separate functions Christoffer Dall
2017-12-11 13:53 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 28/36] KVM: arm64: Configure FPSIMD traps on vcpu load/put for VHE Christoffer Dall
2017-12-11 14:18 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 29/36] KVM: arm64: Configure c15, PMU, and debug register traps on cpu " Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 30/36] KVM: arm64: Separate activate_traps and deactive_traps for VHE and non-VHE Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 31/36] KVM: arm/arm64: Get rid of vgic_elrsr Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 32/36] KVM: arm/arm64: Handle VGICv2 save/restore from the main VGIC code Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 33/36] KVM: arm/arm64: Move arm64-only vgic-v2-sr.c file to arm64 Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 34/36] KVM: arm/arm64: Handle VGICv3 save/restore from the main VGIC code on VHE Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 35/36] KVM: arm/arm64: Move VGIC APR save/restore to vgic put/load Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 36/36] KVM: arm/arm64: Avoid VGICv3 save/restore on VHE with no IRQs Christoffer Dall
2017-12-11 14:43 ` [PATCH v2 00/36] Optimize KVM/ARM for VHE systems Yury Norov
2017-12-11 14:56 ` Marc Zyngier
2017-12-11 15:14 ` Yury Norov
2017-12-11 15:34 ` Christoffer Dall
2017-12-11 16:30 ` Yury Norov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171211093031.GF910@cbox \
--to=christoffer.dall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).