* [PATCH 1/4] ARM: sunxi: mcpm: Add support for A83T
2017-12-11 7:49 [PATCH 0/4] Sunxi: Add SMP support on A83T Mylène Josserand
@ 2017-12-11 7:49 ` Mylène Josserand
2017-12-11 7:49 ` [PATCH 2/4] arm: dts: sun8i: a83t: Add registers needed for MCPM Mylène Josserand
` (3 subsequent siblings)
4 siblings, 0 replies; 17+ messages in thread
From: Mylène Josserand @ 2017-12-11 7:49 UTC (permalink / raw)
To: linux-arm-kernel
Add the support for A83T.
A83T SoC has an additional register than A80 to handle CPU configurations:
R_CPUS_CFG. Information about the register comes from Allwinner's BSP
driver.
An important difference is the Power Off Gating register for clusters
which is BIT(4) in case of SUN9I-A80 and BIT(0) in case of SUN8I-A83T.
Signed-off-by: Myl?ne Josserand <mylene.josserand@free-electrons.com>
---
arch/arm/mach-sunxi/Kconfig | 1 +
arch/arm/mach-sunxi/mcpm.c | 90 ++++++++++++++++++++++++++++++++++++++++++---
2 files changed, 86 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 177380548d99..ae7b57fbd7ac 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -42,6 +42,7 @@ config MACH_SUN8I
default ARCH_SUNXI
select ARM_GIC
select MFD_SUN6I_PRCM
+ imply MCPM
config MACH_SUN9I
bool "Allwinner (sun9i) SoCs support"
diff --git a/arch/arm/mach-sunxi/mcpm.c b/arch/arm/mach-sunxi/mcpm.c
index 4b6e1d6ae379..fc8a28dcb576 100644
--- a/arch/arm/mach-sunxi/mcpm.c
+++ b/arch/arm/mach-sunxi/mcpm.c
@@ -43,17 +43,25 @@
#define CPUCFG_CX_RST_CTRL_L2_RST BIT(8)
#define CPUCFG_CX_RST_CTRL_CX_RST(n) BIT(4 + (n))
#define CPUCFG_CX_RST_CTRL_CORE_RST(n) BIT(n)
+#define CPUCFG_CX_RST_CTRL_CORE_RST_ALL (0xf << 0)
#define PRCM_CPU_PO_RST_CTRL(c) (0x4 + 0x4 * (c))
#define PRCM_CPU_PO_RST_CTRL_CORE(n) BIT(n)
#define PRCM_CPU_PO_RST_CTRL_CORE_ALL 0xf
#define PRCM_PWROFF_GATING_REG(c) (0x100 + 0x4 * (c))
-#define PRCM_PWROFF_GATING_REG_CLUSTER BIT(4)
+/* The power off register for clusters are different from SUN9I and SUN8I */
+#define PRCM_PWROFF_GATING_REG_CLUSTER_SUN8I BIT(0)
+#define PRCM_PWROFF_GATING_REG_CLUSTER_SUN9I BIT(4)
#define PRCM_PWROFF_GATING_REG_CORE(n) BIT(n)
#define PRCM_PWR_SWITCH_REG(c, cpu) (0x140 + 0x10 * (c) + 0x4 * (cpu))
#define PRCM_CPU_SOFT_ENTRY_REG 0x164
+#define R_CPUCFG_CLUSTER_PO_RST_CTRL(c) (0x30 + (c) * 0x4)
+#define R_CPUCFG_CLUSTER_PO_RST_CTRL_CORE(n) BIT(n)
+#define R_CPUCFG_CPU_SOFT_ENTRY_REG 0x01a4
+
static void __iomem *cpucfg_base;
+static void __iomem *r_cpucfg_base;
static void __iomem *prcm_base;
static int sunxi_cpu_power_switch_set(unsigned int cpu, unsigned int cluster,
@@ -101,6 +109,16 @@ static int sunxi_cpu_powerup(unsigned int cpu, unsigned int cluster)
reg &= ~PRCM_CPU_PO_RST_CTRL_CORE(cpu);
writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+ if (r_cpucfg_base) {
+ /* assert cpu power-on reset */
+ reg = readl(r_cpucfg_base +
+ R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+ reg &= ~(R_CPUCFG_CLUSTER_PO_RST_CTRL_CORE(cpu));
+ writel(reg, r_cpucfg_base +
+ R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+ udelay(10);
+ }
+
/* Cortex-A7: hold L1 reset disable signal low */
if (!(of_machine_is_compatible("allwinner,sun9i-a80") &&
cluster == SUN9I_A80_A15_CLUSTER)) {
@@ -126,17 +144,37 @@ static int sunxi_cpu_powerup(unsigned int cpu, unsigned int cluster)
/* open power switch */
sunxi_cpu_power_switch_set(cpu, cluster, true);
+ /* Handle A83T bit swap */
+ if (of_machine_is_compatible("allwinner,sun8i-a83t")) {
+ if (cpu == 0)
+ cpu = 4;
+ }
+
/* clear processor power gate */
reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
reg &= ~PRCM_PWROFF_GATING_REG_CORE(cpu);
writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
udelay(20);
+ if (of_machine_is_compatible("allwinner,sun8i-a83t")) {
+ if (cpu == 4)
+ cpu = 0;
+ }
+
/* de-assert processor power-on reset */
reg = readl(prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
reg |= PRCM_CPU_PO_RST_CTRL_CORE(cpu);
writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+ if (r_cpucfg_base) {
+ reg = readl(r_cpucfg_base +
+ R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+ reg |= R_CPUCFG_CLUSTER_PO_RST_CTRL_CORE(cpu);
+ writel(reg, r_cpucfg_base +
+ R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+ udelay(10);
+ }
+
/* de-assert all processor resets */
reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
reg |= CPUCFG_CX_RST_CTRL_DBG_RST(cpu);
@@ -160,6 +198,14 @@ static int sunxi_cluster_powerup(unsigned int cluster)
if (cluster >= SUNXI_NR_CLUSTERS)
return -EINVAL;
+ /* For A83T, assert cluster cores resets */
+ if (of_machine_is_compatible("allwinner,sun8i-a83t")) {
+ reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+ reg &= ~CPUCFG_CX_RST_CTRL_CORE_RST_ALL; /* Core Reset */
+ writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+ udelay(10);
+ }
+
/* assert ACINACTM */
reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster));
reg |= CPUCFG_CX_CTRL_REG1_ACINACTM;
@@ -170,6 +216,16 @@ static int sunxi_cluster_powerup(unsigned int cluster)
reg &= ~PRCM_CPU_PO_RST_CTRL_CORE_ALL;
writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+ /* assert cluster cores resets */
+ if (r_cpucfg_base) {
+ reg = readl(r_cpucfg_base +
+ R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+ reg &= ~CPUCFG_CX_RST_CTRL_CORE_RST_ALL;
+ writel(reg, r_cpucfg_base +
+ R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+ udelay(10);
+ }
+
/* assert cluster resets */
reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
reg &= ~CPUCFG_CX_RST_CTRL_DBG_SOC_RST;
@@ -202,7 +258,10 @@ static int sunxi_cluster_powerup(unsigned int cluster)
/* clear cluster power gate */
reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
- reg &= ~PRCM_PWROFF_GATING_REG_CLUSTER;
+ if (of_machine_is_compatible("allwinner,sun8i-a83t"))
+ reg &= ~PRCM_PWROFF_GATING_REG_CLUSTER_SUN8I;
+ else
+ reg &= ~PRCM_PWROFF_GATING_REG_CLUSTER_SUN9I;
writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
udelay(20);
@@ -327,8 +386,12 @@ static void __naked sunxi_power_up_setup(unsigned int affinity_level)
static void sunxi_mcpm_setup_entry_point(void)
{
- __raw_writel(virt_to_phys(mcpm_entry_point),
- prcm_base + PRCM_CPU_SOFT_ENTRY_REG);
+ if (of_machine_is_compatible("allwinner,sun9i-a80"))
+ __raw_writel(virt_to_phys(mcpm_entry_point),
+ prcm_base + PRCM_CPU_SOFT_ENTRY_REG);
+ else
+ __raw_writel(virt_to_phys(mcpm_entry_point), r_cpucfg_base +
+ R_CPUCFG_CPU_SOFT_ENTRY_REG);
}
static int __init sunxi_mcpm_init(void)
@@ -336,7 +399,8 @@ static int __init sunxi_mcpm_init(void)
struct device_node *node;
int ret;
- if (!of_machine_is_compatible("allwinner,sun9i-a80"))
+ if (!of_machine_is_compatible("allwinner,sun9i-a80") &&
+ !of_machine_is_compatible("allwinner,sun8i-a83t"))
return -ENODEV;
if (!cci_probed())
@@ -367,6 +431,22 @@ static int __init sunxi_mcpm_init(void)
return -ENOMEM;
}
+ r_cpucfg_base = NULL;
+ if (of_machine_is_compatible("allwinner,sun8i-a83t")) {
+ node = of_find_compatible_node(NULL, NULL,
+ "allwinner,sun8i-a83t-r-cpucfg");
+ if (!node)
+ return -ENODEV;
+
+ r_cpucfg_base = of_iomap(node, 0);
+ of_node_put(node);
+ if (!r_cpucfg_base) {
+ pr_err("%s: failed to map R-CPUCFG registers\n",
+ __func__);
+ return -ENOMEM;
+ }
+ }
+
ret = mcpm_platform_register(&sunxi_power_ops);
if (!ret)
ret = mcpm_sync_init(sunxi_power_up_setup);
--
2.11.0
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH 2/4] arm: dts: sun8i: a83t: Add registers needed for MCPM
2017-12-11 7:49 [PATCH 0/4] Sunxi: Add SMP support on A83T Mylène Josserand
2017-12-11 7:49 ` [PATCH 1/4] ARM: sunxi: mcpm: Add support for A83T Mylène Josserand
@ 2017-12-11 7:49 ` Mylène Josserand
2017-12-13 10:50 ` Maxime Ripard
2017-12-11 7:50 ` [PATCH 3/4] arm: dts: sun8i: a83t: Add CCI-400 node Mylène Josserand
` (2 subsequent siblings)
4 siblings, 1 reply; 17+ messages in thread
From: Mylène Josserand @ 2017-12-11 7:49 UTC (permalink / raw)
To: linux-arm-kernel
Add 3 registers needed for MCPM (ie SMP): prcm, cpucfg and r_cpucfg.
prcm and cpucfg are identical with sun9i-a80. The only difference
is the r_cpucfg that does not exist on sun9i.
Signed-off-by: Myl?ne Josserand <mylene.josserand@free-electrons.com>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index a384b766f3dc..eeb2e7d0d6dc 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -323,6 +323,16 @@
#reset-cells = <1>;
};
+ cpucfg at 01700000 {
+ compatible = "allwinner,sun9i-a80-cpucfg";
+ reg = <0x01700000 0x100>;
+ };
+
+ r_cpucfg at 1f01c00 {
+ compatible = "allwinner,sun8i-a83t-r-cpucfg";
+ reg = <0x1f01c00 0x100>;
+ };
+
pio: pinctrl at 1c20800 {
compatible = "allwinner,sun8i-a83t-pinctrl";
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
@@ -493,6 +503,11 @@
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
+ prcm at 1f01400 {
+ compatible = "allwinner,sun9i-a80-prcm";
+ reg = <0x1f01400 0x200>;
+ };
+
r_ccu: clock at 1f01400 {
compatible = "allwinner,sun8i-a83t-r-ccu";
reg = <0x01f01400 0x400>;
--
2.11.0
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH 2/4] arm: dts: sun8i: a83t: Add registers needed for MCPM
2017-12-11 7:49 ` [PATCH 2/4] arm: dts: sun8i: a83t: Add registers needed for MCPM Mylène Josserand
@ 2017-12-13 10:50 ` Maxime Ripard
0 siblings, 0 replies; 17+ messages in thread
From: Maxime Ripard @ 2017-12-13 10:50 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Mon, Dec 11, 2017 at 08:49:59AM +0100, Myl?ne Josserand wrote:
> Add 3 registers needed for MCPM (ie SMP): prcm, cpucfg and r_cpucfg.
> prcm and cpucfg are identical with sun9i-a80. The only difference
> is the r_cpucfg that does not exist on sun9i.
>
> Signed-off-by: Myl?ne Josserand <mylene.josserand@free-electrons.com>
> ---
> arch/arm/boot/dts/sun8i-a83t.dtsi | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> index a384b766f3dc..eeb2e7d0d6dc 100644
> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> @@ -323,6 +323,16 @@
> #reset-cells = <1>;
> };
> + cpucfg at 01700000 {
Please drop the leading zero here, it generates a warning in dtc.
> + compatible = "allwinner,sun9i-a80-cpucfg";
There's some significant differences between the A83t and the A80 IPs,
you should use a different compatible.
> + reg = <0x01700000 0x100>;
the size is 1k (0x400)
> + };
> +
> + r_cpucfg at 1f01c00 {
> + compatible = "allwinner,sun8i-a83t-r-cpucfg";
> + reg = <0x1f01c00 0x100>;
You should order the nodes by physical address
> + };
> +
> pio: pinctrl at 1c20800 {
> compatible = "allwinner,sun8i-a83t-pinctrl";
> interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
> @@ -493,6 +503,11 @@
> interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + prcm at 1f01400 {
> + compatible = "allwinner,sun9i-a80-prcm";
That block is significantly different on the A83t. Please use a
different compatible.
> + reg = <0x1f01400 0x200>;
> + };
> +
The size is 1k, again.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20171213/dbb4fb64/attachment.sig>
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 3/4] arm: dts: sun8i: a83t: Add CCI-400 node
2017-12-11 7:49 [PATCH 0/4] Sunxi: Add SMP support on A83T Mylène Josserand
2017-12-11 7:49 ` [PATCH 1/4] ARM: sunxi: mcpm: Add support for A83T Mylène Josserand
2017-12-11 7:49 ` [PATCH 2/4] arm: dts: sun8i: a83t: Add registers needed for MCPM Mylène Josserand
@ 2017-12-11 7:50 ` Mylène Josserand
2017-12-13 10:52 ` Maxime Ripard
2017-12-11 7:50 ` [PATCH 4/4] arm: dts: sun8i: a83t: Set timer node to use phy timer Mylène Josserand
2017-12-11 19:35 ` [PATCH 0/4] Sunxi: Add SMP support on A83T Corentin Labbe
4 siblings, 1 reply; 17+ messages in thread
From: Mylène Josserand @ 2017-12-11 7:50 UTC (permalink / raw)
To: linux-arm-kernel
Add CCI-400 node and control-port on CPUs needed by MCPM (ie SMP).
Signed-off-by: Myl?ne Josserand <mylene.josserand@free-electrons.com>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 41 +++++++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index eeb2e7d0d6dc..3e2aad537972 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -62,48 +62,56 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
+ cci-control-port = <&cci_control0>;
};
cpu at 1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ cci-control-port = <&cci_control0>;
};
cpu at 2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ cci-control-port = <&cci_control0>;
};
cpu at 3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ cci-control-port = <&cci_control0>;
};
cpu at 100 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0x100>;
+ cci-control-port = <&cci_control1>;
};
cpu at 101 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0x101>;
+ cci-control-port = <&cci_control1>;
};
cpu at 102 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0x102>;
+ cci-control-port = <&cci_control1>;
};
cpu at 103 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0x103>;
+ cci-control-port = <&cci_control1>;
};
};
@@ -314,6 +322,39 @@
status = "disabled";
};
+ cci: cci at 1790000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x01790000 0x1000>;
+ ranges = <0x0 0x01790000 0x10000>;
+
+ cci_control0: slave-if at 4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x4000 0x1000>;
+ };
+
+ cci_control1: slave-if at 5000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x5000 0x1000>;
+ };
+
+ pmu at 9000 {
+ compatible = "arm,cci-400-pmu,r1";
+ reg = <0x9000 0x5000>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
ccu: clock at 1c20000 {
compatible = "allwinner,sun8i-a83t-ccu";
reg = <0x01c20000 0x400>;
--
2.11.0
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH 3/4] arm: dts: sun8i: a83t: Add CCI-400 node
2017-12-11 7:50 ` [PATCH 3/4] arm: dts: sun8i: a83t: Add CCI-400 node Mylène Josserand
@ 2017-12-13 10:52 ` Maxime Ripard
0 siblings, 0 replies; 17+ messages in thread
From: Maxime Ripard @ 2017-12-13 10:52 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Mon, Dec 11, 2017 at 08:50:00AM +0100, Myl?ne Josserand wrote:
> Add CCI-400 node and control-port on CPUs needed by MCPM (ie SMP).
>
> Signed-off-by: Myl?ne Josserand <mylene.josserand@free-electrons.com>
> ---
> arch/arm/boot/dts/sun8i-a83t.dtsi | 41 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> index eeb2e7d0d6dc..3e2aad537972 100644
> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> @@ -62,48 +62,56 @@
> compatible = "arm,cortex-a7";
> device_type = "cpu";
> reg = <0>;
> + cci-control-port = <&cci_control0>;
> };
>
> cpu at 1 {
> compatible = "arm,cortex-a7";
> device_type = "cpu";
> reg = <1>;
> + cci-control-port = <&cci_control0>;
> };
>
> cpu at 2 {
> compatible = "arm,cortex-a7";
> device_type = "cpu";
> reg = <2>;
> + cci-control-port = <&cci_control0>;
> };
>
> cpu at 3 {
> compatible = "arm,cortex-a7";
> device_type = "cpu";
> reg = <3>;
> + cci-control-port = <&cci_control0>;
> };
>
> cpu at 100 {
> compatible = "arm,cortex-a7";
> device_type = "cpu";
> reg = <0x100>;
> + cci-control-port = <&cci_control1>;
> };
>
> cpu at 101 {
> compatible = "arm,cortex-a7";
> device_type = "cpu";
> reg = <0x101>;
> + cci-control-port = <&cci_control1>;
> };
>
> cpu at 102 {
> compatible = "arm,cortex-a7";
> device_type = "cpu";
> reg = <0x102>;
> + cci-control-port = <&cci_control1>;
> };
>
> cpu at 103 {
> compatible = "arm,cortex-a7";
> device_type = "cpu";
> reg = <0x103>;
> + cci-control-port = <&cci_control1>;
> };
> };
>
> @@ -314,6 +322,39 @@
> status = "disabled";
> };
>
> + cci: cci at 1790000 {
You're not using that label, and you should order the node by physical
address.
> + compatible = "arm,cci-400";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x01790000 0x1000>;
The size is 0x10000.
> + ranges = <0x0 0x01790000 0x10000>;
> +
> + cci_control0: slave-if at 4000 {
> + compatible = "arm,cci-400-ctrl-if";
> + interface-type = "ace";
> + reg = <0x4000 0x1000>;
> + };
> +
> + cci_control1: slave-if at 5000 {
> + compatible = "arm,cci-400-ctrl-if";
> + interface-type = "ace";
> + reg = <0x5000 0x1000>;
> + };
> +
> + pmu at 9000 {
> + compatible = "arm,cci-400-pmu,r1";
> + reg = <0x9000 0x5000>;
> + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20171213/ebbba3d1/attachment.sig>
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 4/4] arm: dts: sun8i: a83t: Set timer node to use phy timer
2017-12-11 7:49 [PATCH 0/4] Sunxi: Add SMP support on A83T Mylène Josserand
` (2 preceding siblings ...)
2017-12-11 7:50 ` [PATCH 3/4] arm: dts: sun8i: a83t: Add CCI-400 node Mylène Josserand
@ 2017-12-11 7:50 ` Mylène Josserand
2017-12-13 10:59 ` Maxime Ripard
2017-12-11 19:35 ` [PATCH 0/4] Sunxi: Add SMP support on A83T Corentin Labbe
4 siblings, 1 reply; 17+ messages in thread
From: Mylène Josserand @ 2017-12-11 7:50 UTC (permalink / raw)
To: linux-arm-kernel
By default, virtual timers are used. These timers need an offset
that must be set by firmware, for example. In case of SMP support,
after a reset, this offset is in "unknown" state and produced
a hang of the kernel.
Use "arm,cpu-registers-not-fw-configured" property allows to use
physical timers instead of virtual ones.
Signed-off-by: Myl?ne Josserand <mylene.josserand@free-electrons.com>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 3e2aad537972..0fe4b9e5dee1 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -121,6 +121,7 @@
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ arm,cpu-registers-not-fw-configured;
};
clocks {
--
2.11.0
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH 4/4] arm: dts: sun8i: a83t: Set timer node to use phy timer
2017-12-11 7:50 ` [PATCH 4/4] arm: dts: sun8i: a83t: Set timer node to use phy timer Mylène Josserand
@ 2017-12-13 10:59 ` Maxime Ripard
0 siblings, 0 replies; 17+ messages in thread
From: Maxime Ripard @ 2017-12-13 10:59 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Mon, Dec 11, 2017 at 08:50:01AM +0100, Myl?ne Josserand wrote:
> By default, virtual timers are used. These timers need an offset
> that must be set by firmware, for example. In case of SMP support,
> after a reset, this offset is in "unknown" state and produced
> a hang of the kernel.
>
> Use "arm,cpu-registers-not-fw-configured" property allows to use
> physical timers instead of virtual ones.
>
> Signed-off-by: Myl?ne Josserand <mylene.josserand@free-electrons.com>
Your commit log could be a little better, something like:
"
The ARM architected timers use an offset between their physical and
virtual counters. That offset should be configured by the bootloader
in CNTVOFF.
However, the A83t bootloader fails to do so, and we end up with an
undefined offset (which in our case is random), meaning that each CPU
will have a different time, which isn't working very well.
Fix that by setting the arm,cpu-registers-not-fw-configured that will
make Linux use the physical timers instead of the virtual ones. One
possible side effect would be that the virtualization features would
be disabled. However, due to the way the GIC has been integrated in
the system, it is already unusable so we're effectively not losing any
feature.
"
The commit title should be improved too.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20171213/d0d1f918/attachment.sig>
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 0/4] Sunxi: Add SMP support on A83T
2017-12-11 7:49 [PATCH 0/4] Sunxi: Add SMP support on A83T Mylène Josserand
` (3 preceding siblings ...)
2017-12-11 7:50 ` [PATCH 4/4] arm: dts: sun8i: a83t: Set timer node to use phy timer Mylène Josserand
@ 2017-12-11 19:35 ` Corentin Labbe
2017-12-12 8:19 ` Mylene JOSSERAND
` (2 more replies)
4 siblings, 3 replies; 17+ messages in thread
From: Corentin Labbe @ 2017-12-11 19:35 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Dec 11, 2017 at 08:49:57AM +0100, Myl?ne Josserand wrote:
> Hello everyone,
>
> This series adds SMP support for Allwinner Sun8i-a83t
> with MCPM (Multi-Cluster Power Management).
> Series information:
> - Based on last linux-next (next-20171211)
> - Had dependencies on Chen Yu's patch that add MCPM
> support:
> https://patchwork.kernel.org/patch/6402801/
>
> Patch 01: Convert the mcpm driver (initially for A80) to be able
> to use it for A83T. This SoC has a bit flip that needs to be handled.
> Patch 02: Add registers nodes (prcm, cpucfg and r_cpucfg) needed
> for MCPM.
> Patch 03: Add CCI-400 node for a83t.
> Patch 04: Fix the use of virtual timers that hangs the kernel in
> case of SMP support.
>
> If you have any remarks/questions, let me know.
> Thank you in advance,
> Myl?ne
>
Hello
As we discussed in private, Chen Yu's patch should be added in your series.
Furthermore, MCPM is not automaticaly selected via imply.
With all patchs I hit a bug:
[ 0.898668] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
[ 0.911162] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
[ 0.917776] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-next-20171211+ #73
[ 0.925418] Hardware name: Allwinner sun8i Family
[ 0.930118] Backtrace:
[ 0.932596] [<c010cc50>] (dump_backtrace) from [<c010cf0c>] (show_stack+0x18/0x1c)
[ 0.940158] r7:c0b261e4 r6:60000013 r5:00000000 r4:c0b51958
[ 0.945820] [<c010cef4>] (show_stack) from [<c06baccc>] (dump_stack+0x8c/0xa0)
[ 0.953045] [<c06bac40>] (dump_stack) from [<c0149d40>] (___might_sleep+0x150/0x170)
[ 0.960779] r7:c0b261e4 r6:00000000 r5:000000ee r4:ee844000
[ 0.966437] [<c0149bf0>] (___might_sleep) from [<c0149dc8>] (__might_sleep+0x68/0xa0)
[ 0.974253] r4:c0861690
[ 0.976796] [<c0149d60>] (__might_sleep) from [<c06d2918>] (mutex_lock+0x24/0x68)
[ 0.984269] r6:c0892f6c r5:ffffffff r4:c0b1bb24
[ 0.988891] [<c06d28f4>] (mutex_lock) from [<c01ccb6c>] (perf_pmu_register+0x24/0x3e4)
[ 0.996795] r5:ffffffff r4:ee98b014
[ 1.000375] [<c01ccb48>] (perf_pmu_register) from [<c03efabc>] (cci_pmu_probe+0x340/0x484)
[ 1.008631] r10:c0892f6c r9:c0bfd5f0 r8:eea19010 r7:c0b261e4 r6:c0b26240 r5:eea19000
[ 1.016447] r4:ee98b010
[ 1.018989] [<c03ef77c>] (cci_pmu_probe) from [<c045e21c>] (platform_drv_probe+0x58/0xb8)
[ 1.027158] r10:00000000 r9:c0b2610c r8:00000000 r7:fffffdfb r6:c0b2610c r5:ffffffed
[ 1.034974] r4:eea19010
[ 1.037511] [<c045e1c4>] (platform_drv_probe) from [<c045c984>] (driver_probe_device+0x254/0x330)
[ 1.046371] r7:00000000 r6:c0bff498 r5:c0bff494 r4:eea19010
[ 1.052026] [<c045c730>] (driver_probe_device) from [<c045cbc4>] (__device_attach_driver+0xa0/0xd4)
[ 1.061062] r10:00000000 r9:c0bff470 r8:00000000 r7:00000001 r6:eea19010 r5:ee845ac0
[ 1.068879] r4:c0b2610c r3:00000000
[ 1.072454] [<c045cb24>] (__device_attach_driver) from [<c045ad68>] (bus_for_each_drv+0x68/0x9c)
[ 1.081228] r7:00000001 r6:c045cb24 r5:ee845ac0 r4:00000000
[ 1.086883] [<c045ad00>] (bus_for_each_drv) from [<c045c60c>] (__device_attach+0xb8/0x11c)
[ 1.095135] r6:c0b3e848 r5:eea19044 r4:eea19010
[ 1.099750] [<c045c554>] (__device_attach) from [<c045cc44>] (device_initial_probe+0x14/0x18)
[ 1.108263] r7:c0b0a4c8 r6:c0b3e848 r5:eea19010 r4:eea19018
[ 1.113919] [<c045cc30>] (device_initial_probe) from [<c045bb58>] (bus_probe_device+0x8c/0x94)
[ 1.122523] [<c045bacc>] (bus_probe_device) from [<c0459db8>] (device_add+0x40c/0x5a0)
[ 1.130429] r7:c0b0a4c8 r6:eea19010 r5:eea18a10 r4:eea19018
[ 1.136089] [<c04599ac>] (device_add) from [<c0582a58>] (of_device_add+0x3c/0x44)
[ 1.143564] r10:00000000 r9:00000000 r8:00000000 r7:eedf21a4 r6:eea18a10 r5:00000000
[ 1.151380] r4:eea19000
[ 1.153915] [<c0582a1c>] (of_device_add) from [<c0582f80>] (of_platform_device_create_pdata+0x7c/0xac)
[ 1.163210] [<c0582f04>] (of_platform_device_create_pdata) from [<c0583100>] (of_platform_bus_create+0xf4/0x1f0)
[ 1.173372] r9:00000000 r8:00000000 r7:00000001 r6:00000000 r5:eedf2154 r4:00000000
[ 1.181107] [<c058300c>] (of_platform_bus_create) from [<c0583374>] (of_platform_populate+0x74/0xd4)
[ 1.190229] r10:00000001 r9:eea18a10 r8:00000000 r7:00000000 r6:00000000 r5:eedf1d04
[ 1.198045] r4:eedf2154
[ 1.200580] [<c0583300>] (of_platform_populate) from [<c03ef2a8>] (cci_platform_probe+0x3c/0x54)
[ 1.209356] r10:00000000 r9:c0b26168 r8:00000000 r7:fffffdfb r6:c0b26168 r5:ffffffed
[ 1.217172] r4:eea18a00
[ 1.219708] [<c03ef26c>] (cci_platform_probe) from [<c045e21c>] (platform_drv_probe+0x58/0xb8)
[ 1.228306] r5:ffffffed r4:eea18a10
[ 1.231881] [<c045e1c4>] (platform_drv_probe) from [<c045c984>] (driver_probe_device+0x254/0x330)
[ 1.240742] r7:00000000 r6:c0bff498 r5:c0bff494 r4:eea18a10
[ 1.246397] [<c045c730>] (driver_probe_device) from [<c045cbc4>] (__device_attach_driver+0xa0/0xd4)
[ 1.255433] r10:00000000 r9:c0bff470 r8:00000000 r7:00000001 r6:eea18a10 r5:ee845ce8
[ 1.263250] r4:c0b26168 r3:00000000
[ 1.266825] [<c045cb24>] (__device_attach_driver) from [<c045ad68>] (bus_for_each_drv+0x68/0x9c)
[ 1.275598] r7:00000001 r6:c045cb24 r5:ee845ce8 r4:00000000
[ 1.281253] [<c045ad00>] (bus_for_each_drv) from [<c045c60c>] (__device_attach+0xb8/0x11c)
[ 1.289506] r6:c0b3e848 r5:eea18a44 r4:eea18a10
[ 1.294120] [<c045c554>] (__device_attach) from [<c045cc44>] (device_initial_probe+0x14/0x18)
[ 1.302633] r7:c0b0a4c8 r6:c0b3e848 r5:eea18a10 r4:eea18a18
[ 1.308288] [<c045cc30>] (device_initial_probe) from [<c045bb58>] (bus_probe_device+0x8c/0x94)
[ 1.316890] [<c045bacc>] (bus_probe_device) from [<c0459db8>] (device_add+0x40c/0x5a0)
[ 1.324796] r7:c0b0a4c8 r6:eea18a10 r5:ee993810 r4:eea18a18
[ 1.330450] [<c04599ac>] (device_add) from [<c0582a58>] (of_device_add+0x3c/0x44)
[ 1.337926] r10:00000000 r9:c07759d8 r8:00000000 r7:eedf1d54 r6:ee993810 r5:00000000
[ 1.345743] r4:eea18a00
[ 1.348277] [<c0582a1c>] (of_device_add) from [<c0582f80>] (of_platform_device_create_pdata+0x7c/0xac)
[ 1.357572] [<c0582f04>] (of_platform_device_create_pdata) from [<c0583100>] (of_platform_bus_create+0xf4/0x1f0)
[ 1.367734] r9:c07759d8 r8:00000000 r7:00000001 r6:00000000 r5:eedf1d04 r4:00000000
[ 1.375469] [<c058300c>] (of_platform_bus_create) from [<c058315c>] (of_platform_bus_create+0x150/0x1f0)
[ 1.384938] r10:ee993810 r9:c07759d8 r8:00000000 r7:00000001 r6:00000000 r5:eedefe1c
[ 1.392754] r4:eedf1d04
[ 1.395289] [<c058300c>] (of_platform_bus_create) from [<c0583374>] (of_platform_populate+0x74/0xd4)
[ 1.404411] r10:00000001 r9:00000000 r8:00000000 r7:c07759d8 r6:00000000 r5:eedee844
[ 1.412228] r4:eedefe1c
[ 1.414769] [<c0583300>] (of_platform_populate) from [<c0a25ee8>] (of_platform_default_populate_init+0x80/0x94)
[ 1.424844] r10:c0a37848 r9:00000000 r8:c0b59680 r7:c0a37834 r6:ffffe000 r5:c0775ce8
[ 1.432661] r4:00000000
[ 1.435200] [<c0a25e68>] (of_platform_default_populate_init) from [<c0102794>] (do_one_initcall+0x5c/0x194)
[ 1.444925] r5:c0a25e68 r4:c0b0a4c8
[ 1.448506] [<c0102738>] (do_one_initcall) from [<c0a00f88>] (kernel_init_freeable+0x1d4/0x268)
[ 1.457195] r9:00000004 r8:c0b59680 r7:c0a37834 r6:c0b59680 r5:c0a47308 r4:c090cfb8
[ 1.464932] [<c0a00db4>] (kernel_init_freeable) from [<c06cf3b0>] (kernel_init+0x10/0x118)
[ 1.473187] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c06cf3a0
[ 1.481004] r4:00000000
[ 1.483540] [<c06cf3a0>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[ 1.491098] Exception stack(0xee845fb0 to 0xee845ff8)
[ 1.496146] 5fa0: 00000000 00000000 00000000 00000000
[ 1.504313] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.512480] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 1.519084] r5:c06cf3a0 r4:00000000
[ 1.522737] ARM CCI_400_r1 PMU driver probed
And only CPU 0 show up.
Regards
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 0/4] Sunxi: Add SMP support on A83T
2017-12-11 19:35 ` [PATCH 0/4] Sunxi: Add SMP support on A83T Corentin Labbe
@ 2017-12-12 8:19 ` Mylene JOSSERAND
2017-12-12 8:24 ` Maxime Ripard
2017-12-12 9:40 ` Mylene JOSSERAND
2 siblings, 0 replies; 17+ messages in thread
From: Mylene JOSSERAND @ 2017-12-12 8:19 UTC (permalink / raw)
To: linux-arm-kernel
Hello Corentin,
Le Mon, 11 Dec 2017 20:35:34 +0100,
Corentin Labbe <clabbe.montjoie@gmail.com> a ?crit :
> On Mon, Dec 11, 2017 at 08:49:57AM +0100, Myl?ne Josserand wrote:
> > Hello everyone,
> >
> > This series adds SMP support for Allwinner Sun8i-a83t
> > with MCPM (Multi-Cluster Power Management).
> > Series information:
> > - Based on last linux-next (next-20171211)
> > - Had dependencies on Chen Yu's patch that add MCPM
> > support:
> > https://patchwork.kernel.org/patch/6402801/
> >
> > Patch 01: Convert the mcpm driver (initially for A80) to be able
> > to use it for A83T. This SoC has a bit flip that needs to be
> > handled. Patch 02: Add registers nodes (prcm, cpucfg and r_cpucfg)
> > needed for MCPM.
> > Patch 03: Add CCI-400 node for a83t.
> > Patch 04: Fix the use of virtual timers that hangs the kernel in
> > case of SMP support.
> >
> > If you have any remarks/questions, let me know.
> > Thank you in advance,
> > Myl?ne
> >
>
> Hello
>
> As we discussed in private, Chen Yu's patch should be added in your
> series.
Yep, I will do that.
>
> Furthermore, MCPM is not automaticaly selected via imply.
It is selected if you run again a sunxi_defconfig. I guess I can change
to "select".
>
> With all patchs I hit a bug:
> [ 0.898668] BUG: sleeping function called from invalid context at
> kernel/locking/mutex.c:238 [ 0.911162] in_atomic(): 1,
> irqs_disabled(): 0, pid: 1, name: swapper/0 [ 0.917776] CPU: 0
> PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-next-20171211+ #73
> [ 0.925418] Hardware name: Allwinner sun8i Family [ 0.930118]
> Backtrace: [ 0.932596] [<c010cc50>] (dump_backtrace) from
> [<c010cf0c>] (show_stack+0x18/0x1c) [ 0.940158] r7:c0b261e4
> r6:60000013 r5:00000000 r4:c0b51958 [ 0.945820] [<c010cef4>]
> (show_stack) from [<c06baccc>] (dump_stack+0x8c/0xa0) [ 0.953045]
> [<c06bac40>] (dump_stack) from [<c0149d40>]
> (___might_sleep+0x150/0x170) [ 0.960779] r7:c0b261e4 r6:00000000
> r5:000000ee r4:ee844000 [ 0.966437] [<c0149bf0>] (___might_sleep)
> from [<c0149dc8>] (__might_sleep+0x68/0xa0) [ 0.974253]
> r4:c0861690 [ 0.976796] [<c0149d60>] (__might_sleep) from
> [<c06d2918>] (mutex_lock+0x24/0x68) [ 0.984269] r6:c0892f6c
> r5:ffffffff r4:c0b1bb24 [ 0.988891] [<c06d28f4>] (mutex_lock) from
> [<c01ccb6c>] (perf_pmu_register+0x24/0x3e4) [ 0.996795]
> r5:ffffffff r4:ee98b014 [ 1.000375] [<c01ccb48>]
> (perf_pmu_register) from [<c03efabc>] (cci_pmu_probe+0x340/0x484)
> [ 1.008631] r10:c0892f6c r9:c0bfd5f0 r8:eea19010 r7:c0b261e4
> r6:c0b26240 r5:eea19000 [ 1.016447] r4:ee98b010 [ 1.018989]
> [<c03ef77c>] (cci_pmu_probe) from [<c045e21c>]
> (platform_drv_probe+0x58/0xb8) [ 1.027158] r10:00000000
> r9:c0b2610c r8:00000000 r7:fffffdfb r6:c0b2610c r5:ffffffed
> [ 1.034974] r4:eea19010 [ 1.037511] [<c045e1c4>]
> (platform_drv_probe) from [<c045c984>]
> (driver_probe_device+0x254/0x330) [ 1.046371] r7:00000000
> r6:c0bff498 r5:c0bff494 r4:eea19010 [ 1.052026] [<c045c730>]
> (driver_probe_device) from [<c045cbc4>]
> (__device_attach_driver+0xa0/0xd4) [ 1.061062] r10:00000000
> r9:c0bff470 r8:00000000 r7:00000001 r6:eea19010 r5:ee845ac0
> [ 1.068879] r4:c0b2610c r3:00000000 [ 1.072454] [<c045cb24>]
> (__device_attach_driver) from [<c045ad68>]
> (bus_for_each_drv+0x68/0x9c) [ 1.081228] r7:00000001 r6:c045cb24
> r5:ee845ac0 r4:00000000 [ 1.086883] [<c045ad00>]
> (bus_for_each_drv) from [<c045c60c>] (__device_attach+0xb8/0x11c)
> [ 1.095135] r6:c0b3e848 r5:eea19044 r4:eea19010 [ 1.099750]
> [<c045c554>] (__device_attach) from [<c045cc44>]
> (device_initial_probe+0x14/0x18) [ 1.108263] r7:c0b0a4c8
> r6:c0b3e848 r5:eea19010 r4:eea19018 [ 1.113919] [<c045cc30>]
> (device_initial_probe) from [<c045bb58>] (bus_probe_device+0x8c/0x94)
> [ 1.122523] [<c045bacc>] (bus_probe_device) from [<c0459db8>]
> (device_add+0x40c/0x5a0) [ 1.130429] r7:c0b0a4c8 r6:eea19010
> r5:eea18a10 r4:eea19018 [ 1.136089] [<c04599ac>] (device_add) from
> [<c0582a58>] (of_device_add+0x3c/0x44) [ 1.143564] r10:00000000
> r9:00000000 r8:00000000 r7:eedf21a4 r6:eea18a10 r5:00000000
> [ 1.151380] r4:eea19000 [ 1.153915] [<c0582a1c>]
> (of_device_add) from [<c0582f80>]
> (of_platform_device_create_pdata+0x7c/0xac) [ 1.163210]
> [<c0582f04>] (of_platform_device_create_pdata) from [<c0583100>]
> (of_platform_bus_create+0xf4/0x1f0) [ 1.173372] r9:00000000
> r8:00000000 r7:00000001 r6:00000000 r5:eedf2154 r4:00000000
> [ 1.181107] [<c058300c>] (of_platform_bus_create) from
> [<c0583374>] (of_platform_populate+0x74/0xd4) [ 1.190229]
> r10:00000001 r9:eea18a10 r8:00000000 r7:00000000 r6:00000000
> r5:eedf1d04 [ 1.198045] r4:eedf2154 [ 1.200580] [<c0583300>]
> (of_platform_populate) from [<c03ef2a8>]
> (cci_platform_probe+0x3c/0x54) [ 1.209356] r10:00000000
> r9:c0b26168 r8:00000000 r7:fffffdfb r6:c0b26168 r5:ffffffed
> [ 1.217172] r4:eea18a00 [ 1.219708] [<c03ef26c>]
> (cci_platform_probe) from [<c045e21c>] (platform_drv_probe+0x58/0xb8)
> [ 1.228306] r5:ffffffed r4:eea18a10 [ 1.231881] [<c045e1c4>]
> (platform_drv_probe) from [<c045c984>]
> (driver_probe_device+0x254/0x330) [ 1.240742] r7:00000000
> r6:c0bff498 r5:c0bff494 r4:eea18a10 [ 1.246397] [<c045c730>]
> (driver_probe_device) from [<c045cbc4>]
> (__device_attach_driver+0xa0/0xd4) [ 1.255433] r10:00000000
> r9:c0bff470 r8:00000000 r7:00000001 r6:eea18a10 r5:ee845ce8
> [ 1.263250] r4:c0b26168 r3:00000000 [ 1.266825] [<c045cb24>]
> (__device_attach_driver) from [<c045ad68>]
> (bus_for_each_drv+0x68/0x9c) [ 1.275598] r7:00000001 r6:c045cb24
> r5:ee845ce8 r4:00000000 [ 1.281253] [<c045ad00>]
> (bus_for_each_drv) from [<c045c60c>] (__device_attach+0xb8/0x11c)
> [ 1.289506] r6:c0b3e848 r5:eea18a44 r4:eea18a10 [ 1.294120]
> [<c045c554>] (__device_attach) from [<c045cc44>]
> (device_initial_probe+0x14/0x18) [ 1.302633] r7:c0b0a4c8
> r6:c0b3e848 r5:eea18a10 r4:eea18a18 [ 1.308288] [<c045cc30>]
> (device_initial_probe) from [<c045bb58>] (bus_probe_device+0x8c/0x94)
> [ 1.316890] [<c045bacc>] (bus_probe_device) from [<c0459db8>]
> (device_add+0x40c/0x5a0) [ 1.324796] r7:c0b0a4c8 r6:eea18a10
> r5:ee993810 r4:eea18a18 [ 1.330450] [<c04599ac>] (device_add) from
> [<c0582a58>] (of_device_add+0x3c/0x44) [ 1.337926] r10:00000000
> r9:c07759d8 r8:00000000 r7:eedf1d54 r6:ee993810 r5:00000000
> [ 1.345743] r4:eea18a00 [ 1.348277] [<c0582a1c>]
> (of_device_add) from [<c0582f80>]
> (of_platform_device_create_pdata+0x7c/0xac) [ 1.357572]
> [<c0582f04>] (of_platform_device_create_pdata) from [<c0583100>]
> (of_platform_bus_create+0xf4/0x1f0) [ 1.367734] r9:c07759d8
> r8:00000000 r7:00000001 r6:00000000 r5:eedf1d04 r4:00000000
> [ 1.375469] [<c058300c>] (of_platform_bus_create) from
> [<c058315c>] (of_platform_bus_create+0x150/0x1f0) [ 1.384938]
> r10:ee993810 r9:c07759d8 r8:00000000 r7:00000001 r6:00000000
> r5:eedefe1c [ 1.392754] r4:eedf1d04 [ 1.395289] [<c058300c>]
> (of_platform_bus_create) from [<c0583374>]
> (of_platform_populate+0x74/0xd4) [ 1.404411] r10:00000001
> r9:00000000 r8:00000000 r7:c07759d8 r6:00000000 r5:eedee844
> [ 1.412228] r4:eedefe1c [ 1.414769] [<c0583300>]
> (of_platform_populate) from [<c0a25ee8>]
> (of_platform_default_populate_init+0x80/0x94) [ 1.424844]
> r10:c0a37848 r9:00000000 r8:c0b59680 r7:c0a37834 r6:ffffe000
> r5:c0775ce8 [ 1.432661] r4:00000000 [ 1.435200] [<c0a25e68>]
> (of_platform_default_populate_init) from [<c0102794>]
> (do_one_initcall+0x5c/0x194) [ 1.444925] r5:c0a25e68 r4:c0b0a4c8
> [ 1.448506] [<c0102738>] (do_one_initcall) from [<c0a00f88>]
> (kernel_init_freeable+0x1d4/0x268) [ 1.457195] r9:00000004
> r8:c0b59680 r7:c0a37834 r6:c0b59680 r5:c0a47308 r4:c090cfb8
> [ 1.464932] [<c0a00db4>] (kernel_init_freeable) from [<c06cf3b0>]
> (kernel_init+0x10/0x118) [ 1.473187] r10:00000000 r9:00000000
> r8:00000000 r7:00000000 r6:00000000 r5:c06cf3a0 [ 1.481004]
> r4:00000000 [ 1.483540] [<c06cf3a0>] (kernel_init) from
> [<c01010e8>] (ret_from_fork+0x14/0x2c) [ 1.491098] Exception
> stack(0xee845fb0 to 0xee845ff8) [ 1.496146]
> 5fa0: 00000000 00000000 00000000
> 00000000 [ 1.504313] 5fc0: 00000000 00000000 00000000 00000000
> 00000000 00000000 00000000 00000000 [ 1.512480] 5fe0: 00000000
> 00000000 00000000 00000000 00000013 00000000 [ 1.519084]
> r5:c06cf3a0 r4:00000000 [ 1.522737] ARM CCI_400_r1 PMU driver
> probed
>
> And only CPU 0 show up.
I am really sorry about that. I tested the patches but not with my last
modifications, I guess...
I will fix it in a V2.
Thank you for reporting the bug.
Best regards,
--
Myl?ne Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 0/4] Sunxi: Add SMP support on A83T
2017-12-11 19:35 ` [PATCH 0/4] Sunxi: Add SMP support on A83T Corentin Labbe
2017-12-12 8:19 ` Mylene JOSSERAND
@ 2017-12-12 8:24 ` Maxime Ripard
2017-12-15 6:10 ` Corentin Labbe
2017-12-12 9:40 ` Mylene JOSSERAND
2 siblings, 1 reply; 17+ messages in thread
From: Maxime Ripard @ 2017-12-12 8:24 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Mon, Dec 11, 2017 at 08:35:34PM +0100, Corentin Labbe wrote:
> On Mon, Dec 11, 2017 at 08:49:57AM +0100, Myl?ne Josserand wrote:
> > This series adds SMP support for Allwinner Sun8i-a83t
> > with MCPM (Multi-Cluster Power Management).
> > Series information:
> > - Based on last linux-next (next-20171211)
> > - Had dependencies on Chen Yu's patch that add MCPM
> > support:
> > https://patchwork.kernel.org/patch/6402801/
> >
> > Patch 01: Convert the mcpm driver (initially for A80) to be able
> > to use it for A83T. This SoC has a bit flip that needs to be handled.
> > Patch 02: Add registers nodes (prcm, cpucfg and r_cpucfg) needed
> > for MCPM.
> > Patch 03: Add CCI-400 node for a83t.
> > Patch 04: Fix the use of virtual timers that hangs the kernel in
> > case of SMP support.
>
> As we discussed in private, Chen Yu's patch should be added in your series.
Not really, she mentionned the dependency in the cover letter, and
it's a good way to do things too. Sure, you can do it your way, but
there's no preference.
> Furthermore, MCPM is not automaticaly selected via imply.
Well, yes, is that an issue?
> With all patchs I hit a bug:
> [ 0.898668] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
I guess this is with CONFIG_PROVE_LOCKING enabled?
> [ 0.911162] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
> [ 0.917776] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-next-20171211+ #73
What are the changes you've made?
> [ 0.925418] Hardware name: Allwinner sun8i Family
> [ 0.930118] Backtrace:
> [ 0.932596] [<c010cc50>] (dump_backtrace) from [<c010cf0c>] (show_stack+0x18/0x1c)
> [ 0.940158] r7:c0b261e4 r6:60000013 r5:00000000 r4:c0b51958
> [ 0.945820] [<c010cef4>] (show_stack) from [<c06baccc>] (dump_stack+0x8c/0xa0)
> [ 0.953045] [<c06bac40>] (dump_stack) from [<c0149d40>] (___might_sleep+0x150/0x170)
> [ 0.960779] r7:c0b261e4 r6:00000000 r5:000000ee r4:ee844000
> [ 0.966437] [<c0149bf0>] (___might_sleep) from [<c0149dc8>] (__might_sleep+0x68/0xa0)
> [ 0.974253] r4:c0861690
> [ 0.976796] [<c0149d60>] (__might_sleep) from [<c06d2918>] (mutex_lock+0x24/0x68)
> [ 0.984269] r6:c0892f6c r5:ffffffff r4:c0b1bb24
> [ 0.988891] [<c06d28f4>] (mutex_lock) from [<c01ccb6c>] (perf_pmu_register+0x24/0x3e4)
> [ 0.996795] r5:ffffffff r4:ee98b014
> [ 1.000375] [<c01ccb48>] (perf_pmu_register) from [<c03efabc>] (cci_pmu_probe+0x340/0x484)
> [ 1.008631] r10:c0892f6c r9:c0bfd5f0 r8:eea19010 r7:c0b261e4 r6:c0b26240 r5:eea19000
> [ 1.016447] r4:ee98b010
> [ 1.018989] [<c03ef77c>] (cci_pmu_probe) from [<c045e21c>] (platform_drv_probe+0x58/0xb8)
> [ 1.027158] r10:00000000 r9:c0b2610c r8:00000000 r7:fffffdfb r6:c0b2610c r5:ffffffed
> [ 1.034974] r4:eea19010
> [ 1.037511] [<c045e1c4>] (platform_drv_probe) from [<c045c984>] (driver_probe_device+0x254/0x330)
> [ 1.046371] r7:00000000 r6:c0bff498 r5:c0bff494 r4:eea19010
> [ 1.052026] [<c045c730>] (driver_probe_device) from [<c045cbc4>] (__device_attach_driver+0xa0/0xd4)
> [ 1.061062] r10:00000000 r9:c0bff470 r8:00000000 r7:00000001 r6:eea19010 r5:ee845ac0
> [ 1.068879] r4:c0b2610c r3:00000000
> [ 1.072454] [<c045cb24>] (__device_attach_driver) from [<c045ad68>] (bus_for_each_drv+0x68/0x9c)
> [ 1.081228] r7:00000001 r6:c045cb24 r5:ee845ac0 r4:00000000
> [ 1.086883] [<c045ad00>] (bus_for_each_drv) from [<c045c60c>] (__device_attach+0xb8/0x11c)
> [ 1.095135] r6:c0b3e848 r5:eea19044 r4:eea19010
> [ 1.099750] [<c045c554>] (__device_attach) from [<c045cc44>] (device_initial_probe+0x14/0x18)
> [ 1.108263] r7:c0b0a4c8 r6:c0b3e848 r5:eea19010 r4:eea19018
> [ 1.113919] [<c045cc30>] (device_initial_probe) from [<c045bb58>] (bus_probe_device+0x8c/0x94)
> [ 1.122523] [<c045bacc>] (bus_probe_device) from [<c0459db8>] (device_add+0x40c/0x5a0)
> [ 1.130429] r7:c0b0a4c8 r6:eea19010 r5:eea18a10 r4:eea19018
> [ 1.136089] [<c04599ac>] (device_add) from [<c0582a58>] (of_device_add+0x3c/0x44)
> [ 1.143564] r10:00000000 r9:00000000 r8:00000000 r7:eedf21a4 r6:eea18a10 r5:00000000
> [ 1.151380] r4:eea19000
> [ 1.153915] [<c0582a1c>] (of_device_add) from [<c0582f80>] (of_platform_device_create_pdata+0x7c/0xac)
> [ 1.163210] [<c0582f04>] (of_platform_device_create_pdata) from [<c0583100>] (of_platform_bus_create+0xf4/0x1f0)
> [ 1.173372] r9:00000000 r8:00000000 r7:00000001 r6:00000000 r5:eedf2154 r4:00000000
> [ 1.181107] [<c058300c>] (of_platform_bus_create) from [<c0583374>] (of_platform_populate+0x74/0xd4)
> [ 1.190229] r10:00000001 r9:eea18a10 r8:00000000 r7:00000000 r6:00000000 r5:eedf1d04
> [ 1.198045] r4:eedf2154
> [ 1.200580] [<c0583300>] (of_platform_populate) from [<c03ef2a8>] (cci_platform_probe+0x3c/0x54)
> [ 1.209356] r10:00000000 r9:c0b26168 r8:00000000 r7:fffffdfb r6:c0b26168 r5:ffffffed
> [ 1.217172] r4:eea18a00
> [ 1.219708] [<c03ef26c>] (cci_platform_probe) from [<c045e21c>] (platform_drv_probe+0x58/0xb8)
> [ 1.228306] r5:ffffffed r4:eea18a10
> [ 1.231881] [<c045e1c4>] (platform_drv_probe) from [<c045c984>] (driver_probe_device+0x254/0x330)
> [ 1.240742] r7:00000000 r6:c0bff498 r5:c0bff494 r4:eea18a10
> [ 1.246397] [<c045c730>] (driver_probe_device) from [<c045cbc4>] (__device_attach_driver+0xa0/0xd4)
> [ 1.255433] r10:00000000 r9:c0bff470 r8:00000000 r7:00000001 r6:eea18a10 r5:ee845ce8
> [ 1.263250] r4:c0b26168 r3:00000000
> [ 1.266825] [<c045cb24>] (__device_attach_driver) from [<c045ad68>] (bus_for_each_drv+0x68/0x9c)
> [ 1.275598] r7:00000001 r6:c045cb24 r5:ee845ce8 r4:00000000
> [ 1.281253] [<c045ad00>] (bus_for_each_drv) from [<c045c60c>] (__device_attach+0xb8/0x11c)
> [ 1.289506] r6:c0b3e848 r5:eea18a44 r4:eea18a10
> [ 1.294120] [<c045c554>] (__device_attach) from [<c045cc44>] (device_initial_probe+0x14/0x18)
> [ 1.302633] r7:c0b0a4c8 r6:c0b3e848 r5:eea18a10 r4:eea18a18
> [ 1.308288] [<c045cc30>] (device_initial_probe) from [<c045bb58>] (bus_probe_device+0x8c/0x94)
> [ 1.316890] [<c045bacc>] (bus_probe_device) from [<c0459db8>] (device_add+0x40c/0x5a0)
> [ 1.324796] r7:c0b0a4c8 r6:eea18a10 r5:ee993810 r4:eea18a18
> [ 1.330450] [<c04599ac>] (device_add) from [<c0582a58>] (of_device_add+0x3c/0x44)
> [ 1.337926] r10:00000000 r9:c07759d8 r8:00000000 r7:eedf1d54 r6:ee993810 r5:00000000
> [ 1.345743] r4:eea18a00
> [ 1.348277] [<c0582a1c>] (of_device_add) from [<c0582f80>] (of_platform_device_create_pdata+0x7c/0xac)
> [ 1.357572] [<c0582f04>] (of_platform_device_create_pdata) from [<c0583100>] (of_platform_bus_create+0xf4/0x1f0)
> [ 1.367734] r9:c07759d8 r8:00000000 r7:00000001 r6:00000000 r5:eedf1d04 r4:00000000
> [ 1.375469] [<c058300c>] (of_platform_bus_create) from [<c058315c>] (of_platform_bus_create+0x150/0x1f0)
> [ 1.384938] r10:ee993810 r9:c07759d8 r8:00000000 r7:00000001 r6:00000000 r5:eedefe1c
> [ 1.392754] r4:eedf1d04
> [ 1.395289] [<c058300c>] (of_platform_bus_create) from [<c0583374>] (of_platform_populate+0x74/0xd4)
> [ 1.404411] r10:00000001 r9:00000000 r8:00000000 r7:c07759d8 r6:00000000 r5:eedee844
> [ 1.412228] r4:eedefe1c
> [ 1.414769] [<c0583300>] (of_platform_populate) from [<c0a25ee8>] (of_platform_default_populate_init+0x80/0x94)
> [ 1.424844] r10:c0a37848 r9:00000000 r8:c0b59680 r7:c0a37834 r6:ffffe000 r5:c0775ce8
> [ 1.432661] r4:00000000
> [ 1.435200] [<c0a25e68>] (of_platform_default_populate_init) from [<c0102794>] (do_one_initcall+0x5c/0x194)
> [ 1.444925] r5:c0a25e68 r4:c0b0a4c8
> [ 1.448506] [<c0102738>] (do_one_initcall) from [<c0a00f88>] (kernel_init_freeable+0x1d4/0x268)
> [ 1.457195] r9:00000004 r8:c0b59680 r7:c0a37834 r6:c0b59680 r5:c0a47308 r4:c090cfb8
> [ 1.464932] [<c0a00db4>] (kernel_init_freeable) from [<c06cf3b0>] (kernel_init+0x10/0x118)
> [ 1.473187] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c06cf3a0
> [ 1.481004] r4:00000000
> [ 1.483540] [<c06cf3a0>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
> [ 1.491098] Exception stack(0xee845fb0 to 0xee845ff8)
> [ 1.496146] 5fa0: 00000000 00000000 00000000 00000000
> [ 1.504313] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [ 1.512480] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> [ 1.519084] r5:c06cf3a0 r4:00000000
> [ 1.522737] ARM CCI_400_r1 PMU driver probed
>
> And only CPU 0 show up.
This looks more like a bug in the CCI code, and not in this serie
itself. Can you share your whole boot logs?
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20171212/cc5f0a81/attachment-0001.sig>
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 0/4] Sunxi: Add SMP support on A83T
2017-12-12 8:24 ` Maxime Ripard
@ 2017-12-15 6:10 ` Corentin Labbe
2017-12-27 15:07 ` Mylene JOSSERAND
0 siblings, 1 reply; 17+ messages in thread
From: Corentin Labbe @ 2017-12-15 6:10 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Dec 12, 2017 at 09:24:25AM +0100, Maxime Ripard wrote:
> Hi,
>
> On Mon, Dec 11, 2017 at 08:35:34PM +0100, Corentin Labbe wrote:
> > On Mon, Dec 11, 2017 at 08:49:57AM +0100, Myl?ne Josserand wrote:
> > > This series adds SMP support for Allwinner Sun8i-a83t
> > > with MCPM (Multi-Cluster Power Management).
> > > Series information:
> > > - Based on last linux-next (next-20171211)
> > > - Had dependencies on Chen Yu's patch that add MCPM
> > > support:
> > > https://patchwork.kernel.org/patch/6402801/
> > >
> > > Patch 01: Convert the mcpm driver (initially for A80) to be able
> > > to use it for A83T. This SoC has a bit flip that needs to be handled.
> > > Patch 02: Add registers nodes (prcm, cpucfg and r_cpucfg) needed
> > > for MCPM.
> > > Patch 03: Add CCI-400 node for a83t.
> > > Patch 04: Fix the use of virtual timers that hangs the kernel in
> > > case of SMP support.
> >
> > As we discussed in private, Chen Yu's patch should be added in your series.
>
> Not really, she mentionned the dependency in the cover letter, and
> it's a good way to do things too. Sure, you can do it your way, but
> there's no preference.
>
If the goal of this series is to be applied, the dependency must be applied also.
And since the dependency is 2 years old (and part of a serie which does not apply now), I think cherry picking the patch and send it for review is better.
> > Furthermore, MCPM is not automaticaly selected via imply.
>
> Well, yes, is that an issue?
>
After reading the imply documentation, no.
> > With all patchs I hit a bug:
> > [ 0.898668] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
>
> I guess this is with CONFIG_PROVE_LOCKING enabled?
>
No, the BUG() printed is enabled by default
> > [ 0.911162] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
> > [ 0.917776] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-next-20171211+ #73
>
> What are the changes you've made?
>
Just adding wens's patch and this series.
> > [ 0.925418] Hardware name: Allwinner sun8i Family
> > [ 0.930118] Backtrace:
> > [ 0.932596] [<c010cc50>] (dump_backtrace) from [<c010cf0c>] (show_stack+0x18/0x1c)
> > [ 0.940158] r7:c0b261e4 r6:60000013 r5:00000000 r4:c0b51958
> > [ 0.945820] [<c010cef4>] (show_stack) from [<c06baccc>] (dump_stack+0x8c/0xa0)
> > [ 0.953045] [<c06bac40>] (dump_stack) from [<c0149d40>] (___might_sleep+0x150/0x170)
> > [ 0.960779] r7:c0b261e4 r6:00000000 r5:000000ee r4:ee844000
> > [ 0.966437] [<c0149bf0>] (___might_sleep) from [<c0149dc8>] (__might_sleep+0x68/0xa0)
> > [ 0.974253] r4:c0861690
> > [ 0.976796] [<c0149d60>] (__might_sleep) from [<c06d2918>] (mutex_lock+0x24/0x68)
> > [ 0.984269] r6:c0892f6c r5:ffffffff r4:c0b1bb24
> > [ 0.988891] [<c06d28f4>] (mutex_lock) from [<c01ccb6c>] (perf_pmu_register+0x24/0x3e4)
> > [ 0.996795] r5:ffffffff r4:ee98b014
> > [ 1.000375] [<c01ccb48>] (perf_pmu_register) from [<c03efabc>] (cci_pmu_probe+0x340/0x484)
> > [ 1.008631] r10:c0892f6c r9:c0bfd5f0 r8:eea19010 r7:c0b261e4 r6:c0b26240 r5:eea19000
> > [ 1.016447] r4:ee98b010
> > [ 1.018989] [<c03ef77c>] (cci_pmu_probe) from [<c045e21c>] (platform_drv_probe+0x58/0xb8)
> > [ 1.027158] r10:00000000 r9:c0b2610c r8:00000000 r7:fffffdfb r6:c0b2610c r5:ffffffed
> > [ 1.034974] r4:eea19010
> > [ 1.037511] [<c045e1c4>] (platform_drv_probe) from [<c045c984>] (driver_probe_device+0x254/0x330)
> > [ 1.046371] r7:00000000 r6:c0bff498 r5:c0bff494 r4:eea19010
> > [ 1.052026] [<c045c730>] (driver_probe_device) from [<c045cbc4>] (__device_attach_driver+0xa0/0xd4)
> > [ 1.061062] r10:00000000 r9:c0bff470 r8:00000000 r7:00000001 r6:eea19010 r5:ee845ac0
> > [ 1.068879] r4:c0b2610c r3:00000000
> > [ 1.072454] [<c045cb24>] (__device_attach_driver) from [<c045ad68>] (bus_for_each_drv+0x68/0x9c)
> > [ 1.081228] r7:00000001 r6:c045cb24 r5:ee845ac0 r4:00000000
> > [ 1.086883] [<c045ad00>] (bus_for_each_drv) from [<c045c60c>] (__device_attach+0xb8/0x11c)
> > [ 1.095135] r6:c0b3e848 r5:eea19044 r4:eea19010
> > [ 1.099750] [<c045c554>] (__device_attach) from [<c045cc44>] (device_initial_probe+0x14/0x18)
> > [ 1.108263] r7:c0b0a4c8 r6:c0b3e848 r5:eea19010 r4:eea19018
> > [ 1.113919] [<c045cc30>] (device_initial_probe) from [<c045bb58>] (bus_probe_device+0x8c/0x94)
> > [ 1.122523] [<c045bacc>] (bus_probe_device) from [<c0459db8>] (device_add+0x40c/0x5a0)
> > [ 1.130429] r7:c0b0a4c8 r6:eea19010 r5:eea18a10 r4:eea19018
> > [ 1.136089] [<c04599ac>] (device_add) from [<c0582a58>] (of_device_add+0x3c/0x44)
> > [ 1.143564] r10:00000000 r9:00000000 r8:00000000 r7:eedf21a4 r6:eea18a10 r5:00000000
> > [ 1.151380] r4:eea19000
> > [ 1.153915] [<c0582a1c>] (of_device_add) from [<c0582f80>] (of_platform_device_create_pdata+0x7c/0xac)
> > [ 1.163210] [<c0582f04>] (of_platform_device_create_pdata) from [<c0583100>] (of_platform_bus_create+0xf4/0x1f0)
> > [ 1.173372] r9:00000000 r8:00000000 r7:00000001 r6:00000000 r5:eedf2154 r4:00000000
> > [ 1.181107] [<c058300c>] (of_platform_bus_create) from [<c0583374>] (of_platform_populate+0x74/0xd4)
> > [ 1.190229] r10:00000001 r9:eea18a10 r8:00000000 r7:00000000 r6:00000000 r5:eedf1d04
> > [ 1.198045] r4:eedf2154
> > [ 1.200580] [<c0583300>] (of_platform_populate) from [<c03ef2a8>] (cci_platform_probe+0x3c/0x54)
> > [ 1.209356] r10:00000000 r9:c0b26168 r8:00000000 r7:fffffdfb r6:c0b26168 r5:ffffffed
> > [ 1.217172] r4:eea18a00
> > [ 1.219708] [<c03ef26c>] (cci_platform_probe) from [<c045e21c>] (platform_drv_probe+0x58/0xb8)
> > [ 1.228306] r5:ffffffed r4:eea18a10
> > [ 1.231881] [<c045e1c4>] (platform_drv_probe) from [<c045c984>] (driver_probe_device+0x254/0x330)
> > [ 1.240742] r7:00000000 r6:c0bff498 r5:c0bff494 r4:eea18a10
> > [ 1.246397] [<c045c730>] (driver_probe_device) from [<c045cbc4>] (__device_attach_driver+0xa0/0xd4)
> > [ 1.255433] r10:00000000 r9:c0bff470 r8:00000000 r7:00000001 r6:eea18a10 r5:ee845ce8
> > [ 1.263250] r4:c0b26168 r3:00000000
> > [ 1.266825] [<c045cb24>] (__device_attach_driver) from [<c045ad68>] (bus_for_each_drv+0x68/0x9c)
> > [ 1.275598] r7:00000001 r6:c045cb24 r5:ee845ce8 r4:00000000
> > [ 1.281253] [<c045ad00>] (bus_for_each_drv) from [<c045c60c>] (__device_attach+0xb8/0x11c)
> > [ 1.289506] r6:c0b3e848 r5:eea18a44 r4:eea18a10
> > [ 1.294120] [<c045c554>] (__device_attach) from [<c045cc44>] (device_initial_probe+0x14/0x18)
> > [ 1.302633] r7:c0b0a4c8 r6:c0b3e848 r5:eea18a10 r4:eea18a18
> > [ 1.308288] [<c045cc30>] (device_initial_probe) from [<c045bb58>] (bus_probe_device+0x8c/0x94)
> > [ 1.316890] [<c045bacc>] (bus_probe_device) from [<c0459db8>] (device_add+0x40c/0x5a0)
> > [ 1.324796] r7:c0b0a4c8 r6:eea18a10 r5:ee993810 r4:eea18a18
> > [ 1.330450] [<c04599ac>] (device_add) from [<c0582a58>] (of_device_add+0x3c/0x44)
> > [ 1.337926] r10:00000000 r9:c07759d8 r8:00000000 r7:eedf1d54 r6:ee993810 r5:00000000
> > [ 1.345743] r4:eea18a00
> > [ 1.348277] [<c0582a1c>] (of_device_add) from [<c0582f80>] (of_platform_device_create_pdata+0x7c/0xac)
> > [ 1.357572] [<c0582f04>] (of_platform_device_create_pdata) from [<c0583100>] (of_platform_bus_create+0xf4/0x1f0)
> > [ 1.367734] r9:c07759d8 r8:00000000 r7:00000001 r6:00000000 r5:eedf1d04 r4:00000000
> > [ 1.375469] [<c058300c>] (of_platform_bus_create) from [<c058315c>] (of_platform_bus_create+0x150/0x1f0)
> > [ 1.384938] r10:ee993810 r9:c07759d8 r8:00000000 r7:00000001 r6:00000000 r5:eedefe1c
> > [ 1.392754] r4:eedf1d04
> > [ 1.395289] [<c058300c>] (of_platform_bus_create) from [<c0583374>] (of_platform_populate+0x74/0xd4)
> > [ 1.404411] r10:00000001 r9:00000000 r8:00000000 r7:c07759d8 r6:00000000 r5:eedee844
> > [ 1.412228] r4:eedefe1c
> > [ 1.414769] [<c0583300>] (of_platform_populate) from [<c0a25ee8>] (of_platform_default_populate_init+0x80/0x94)
> > [ 1.424844] r10:c0a37848 r9:00000000 r8:c0b59680 r7:c0a37834 r6:ffffe000 r5:c0775ce8
> > [ 1.432661] r4:00000000
> > [ 1.435200] [<c0a25e68>] (of_platform_default_populate_init) from [<c0102794>] (do_one_initcall+0x5c/0x194)
> > [ 1.444925] r5:c0a25e68 r4:c0b0a4c8
> > [ 1.448506] [<c0102738>] (do_one_initcall) from [<c0a00f88>] (kernel_init_freeable+0x1d4/0x268)
> > [ 1.457195] r9:00000004 r8:c0b59680 r7:c0a37834 r6:c0b59680 r5:c0a47308 r4:c090cfb8
> > [ 1.464932] [<c0a00db4>] (kernel_init_freeable) from [<c06cf3b0>] (kernel_init+0x10/0x118)
> > [ 1.473187] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c06cf3a0
> > [ 1.481004] r4:00000000
> > [ 1.483540] [<c06cf3a0>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
> > [ 1.491098] Exception stack(0xee845fb0 to 0xee845ff8)
> > [ 1.496146] 5fa0: 00000000 00000000 00000000 00000000
> > [ 1.504313] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> > [ 1.512480] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> > [ 1.519084] r5:c06cf3a0 r4:00000000
> > [ 1.522737] ARM CCI_400_r1 PMU driver probed
> >
> > And only CPU 0 show up.
>
> This looks more like a bug in the CCI code, and not in this serie
> itself. Can you share your whole boot logs?
>
This week end I will retry and send it.
Regards
Corentin Labbe
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 0/4] Sunxi: Add SMP support on A83T
2017-12-15 6:10 ` Corentin Labbe
@ 2017-12-27 15:07 ` Mylene JOSSERAND
2017-12-28 20:31 ` Corentin Labbe
0 siblings, 1 reply; 17+ messages in thread
From: Mylene JOSSERAND @ 2017-12-27 15:07 UTC (permalink / raw)
To: linux-arm-kernel
Hello Corentin,
Le Fri, 15 Dec 2017 07:10:46 +0100,
Corentin Labbe <clabbe.montjoie@gmail.com> a ?crit :
> On Tue, Dec 12, 2017 at 09:24:25AM +0100, Maxime Ripard wrote:
> > Hi,
> >
> > On Mon, Dec 11, 2017 at 08:35:34PM +0100, Corentin Labbe wrote:
> > > On Mon, Dec 11, 2017 at 08:49:57AM +0100, Myl?ne Josserand wrote:
> > > > This series adds SMP support for Allwinner Sun8i-a83t
> > > > with MCPM (Multi-Cluster Power Management).
> > > > Series information:
> > > > - Based on last linux-next (next-20171211)
> > > > - Had dependencies on Chen Yu's patch that add MCPM
> > > > support:
> > > > https://patchwork.kernel.org/patch/6402801/
> > > >
> > > > Patch 01: Convert the mcpm driver (initially for A80) to be able
> > > > to use it for A83T. This SoC has a bit flip that needs to be handled.
> > > > Patch 02: Add registers nodes (prcm, cpucfg and r_cpucfg) needed
> > > > for MCPM.
> > > > Patch 03: Add CCI-400 node for a83t.
> > > > Patch 04: Fix the use of virtual timers that hangs the kernel in
> > > > case of SMP support.
> > >
> > > As we discussed in private, Chen Yu's patch should be added in your series.
> >
> > Not really, she mentionned the dependency in the cover letter, and
> > it's a good way to do things too. Sure, you can do it your way, but
> > there's no preference.
> >
>
> If the goal of this series is to be applied, the dependency must be applied also.
> And since the dependency is 2 years old (and part of a serie which does not apply now), I think cherry picking the patch and send it for review is better.
>
> > > Furthermore, MCPM is not automaticaly selected via imply.
> >
> > Well, yes, is that an issue?
> >
>
> After reading the imply documentation, no.
>
> > > With all patchs I hit a bug:
> > > [ 0.898668] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
> >
> > I guess this is with CONFIG_PROVE_LOCKING enabled?
> >
>
> No, the BUG() printed is enabled by default
>
> > > [ 0.911162] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
> > > [ 0.917776] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-next-20171211+ #73
> >
> > What are the changes you've made?
> >
>
> Just adding wens's patch and this series.
I tried to reproduce your issue without success (even with
CONFIG_PROVE_LOCKING enabled, just in case).
Can you give me more details about your tests? which defconfig and
additional configurations?
>
> > > [ 0.925418] Hardware name: Allwinner sun8i Family
> > > [ 0.930118] Backtrace:
> > > [ 0.932596] [<c010cc50>] (dump_backtrace) from [<c010cf0c>] (show_stack+0x18/0x1c)
> > > [ 0.940158] r7:c0b261e4 r6:60000013 r5:00000000 r4:c0b51958
> > > [ 0.945820] [<c010cef4>] (show_stack) from [<c06baccc>] (dump_stack+0x8c/0xa0)
> > > [ 0.953045] [<c06bac40>] (dump_stack) from [<c0149d40>] (___might_sleep+0x150/0x170)
> > > [ 0.960779] r7:c0b261e4 r6:00000000 r5:000000ee r4:ee844000
> > > [ 0.966437] [<c0149bf0>] (___might_sleep) from [<c0149dc8>] (__might_sleep+0x68/0xa0)
> > > [ 0.974253] r4:c0861690
> > > [ 0.976796] [<c0149d60>] (__might_sleep) from [<c06d2918>] (mutex_lock+0x24/0x68)
> > > [ 0.984269] r6:c0892f6c r5:ffffffff r4:c0b1bb24
> > > [ 0.988891] [<c06d28f4>] (mutex_lock) from [<c01ccb6c>] (perf_pmu_register+0x24/0x3e4)
> > > [ 0.996795] r5:ffffffff r4:ee98b014
> > > [ 1.000375] [<c01ccb48>] (perf_pmu_register) from [<c03efabc>] (cci_pmu_probe+0x340/0x484)
> > > [ 1.008631] r10:c0892f6c r9:c0bfd5f0 r8:eea19010 r7:c0b261e4 r6:c0b26240 r5:eea19000
> > > [ 1.016447] r4:ee98b010
> > > [ 1.018989] [<c03ef77c>] (cci_pmu_probe) from [<c045e21c>] (platform_drv_probe+0x58/0xb8)
> > > [ 1.027158] r10:00000000 r9:c0b2610c r8:00000000 r7:fffffdfb r6:c0b2610c r5:ffffffed
> > > [ 1.034974] r4:eea19010
> > > [ 1.037511] [<c045e1c4>] (platform_drv_probe) from [<c045c984>] (driver_probe_device+0x254/0x330)
> > > [ 1.046371] r7:00000000 r6:c0bff498 r5:c0bff494 r4:eea19010
> > > [ 1.052026] [<c045c730>] (driver_probe_device) from [<c045cbc4>] (__device_attach_driver+0xa0/0xd4)
> > > [ 1.061062] r10:00000000 r9:c0bff470 r8:00000000 r7:00000001 r6:eea19010 r5:ee845ac0
> > > [ 1.068879] r4:c0b2610c r3:00000000
> > > [ 1.072454] [<c045cb24>] (__device_attach_driver) from [<c045ad68>] (bus_for_each_drv+0x68/0x9c)
> > > [ 1.081228] r7:00000001 r6:c045cb24 r5:ee845ac0 r4:00000000
> > > [ 1.086883] [<c045ad00>] (bus_for_each_drv) from [<c045c60c>] (__device_attach+0xb8/0x11c)
> > > [ 1.095135] r6:c0b3e848 r5:eea19044 r4:eea19010
> > > [ 1.099750] [<c045c554>] (__device_attach) from [<c045cc44>] (device_initial_probe+0x14/0x18)
> > > [ 1.108263] r7:c0b0a4c8 r6:c0b3e848 r5:eea19010 r4:eea19018
> > > [ 1.113919] [<c045cc30>] (device_initial_probe) from [<c045bb58>] (bus_probe_device+0x8c/0x94)
> > > [ 1.122523] [<c045bacc>] (bus_probe_device) from [<c0459db8>] (device_add+0x40c/0x5a0)
> > > [ 1.130429] r7:c0b0a4c8 r6:eea19010 r5:eea18a10 r4:eea19018
> > > [ 1.136089] [<c04599ac>] (device_add) from [<c0582a58>] (of_device_add+0x3c/0x44)
> > > [ 1.143564] r10:00000000 r9:00000000 r8:00000000 r7:eedf21a4 r6:eea18a10 r5:00000000
> > > [ 1.151380] r4:eea19000
> > > [ 1.153915] [<c0582a1c>] (of_device_add) from [<c0582f80>] (of_platform_device_create_pdata+0x7c/0xac)
> > > [ 1.163210] [<c0582f04>] (of_platform_device_create_pdata) from [<c0583100>] (of_platform_bus_create+0xf4/0x1f0)
> > > [ 1.173372] r9:00000000 r8:00000000 r7:00000001 r6:00000000 r5:eedf2154 r4:00000000
> > > [ 1.181107] [<c058300c>] (of_platform_bus_create) from [<c0583374>] (of_platform_populate+0x74/0xd4)
> > > [ 1.190229] r10:00000001 r9:eea18a10 r8:00000000 r7:00000000 r6:00000000 r5:eedf1d04
> > > [ 1.198045] r4:eedf2154
> > > [ 1.200580] [<c0583300>] (of_platform_populate) from [<c03ef2a8>] (cci_platform_probe+0x3c/0x54)
> > > [ 1.209356] r10:00000000 r9:c0b26168 r8:00000000 r7:fffffdfb r6:c0b26168 r5:ffffffed
> > > [ 1.217172] r4:eea18a00
> > > [ 1.219708] [<c03ef26c>] (cci_platform_probe) from [<c045e21c>] (platform_drv_probe+0x58/0xb8)
> > > [ 1.228306] r5:ffffffed r4:eea18a10
> > > [ 1.231881] [<c045e1c4>] (platform_drv_probe) from [<c045c984>] (driver_probe_device+0x254/0x330)
> > > [ 1.240742] r7:00000000 r6:c0bff498 r5:c0bff494 r4:eea18a10
> > > [ 1.246397] [<c045c730>] (driver_probe_device) from [<c045cbc4>] (__device_attach_driver+0xa0/0xd4)
> > > [ 1.255433] r10:00000000 r9:c0bff470 r8:00000000 r7:00000001 r6:eea18a10 r5:ee845ce8
> > > [ 1.263250] r4:c0b26168 r3:00000000
> > > [ 1.266825] [<c045cb24>] (__device_attach_driver) from [<c045ad68>] (bus_for_each_drv+0x68/0x9c)
> > > [ 1.275598] r7:00000001 r6:c045cb24 r5:ee845ce8 r4:00000000
> > > [ 1.281253] [<c045ad00>] (bus_for_each_drv) from [<c045c60c>] (__device_attach+0xb8/0x11c)
> > > [ 1.289506] r6:c0b3e848 r5:eea18a44 r4:eea18a10
> > > [ 1.294120] [<c045c554>] (__device_attach) from [<c045cc44>] (device_initial_probe+0x14/0x18)
> > > [ 1.302633] r7:c0b0a4c8 r6:c0b3e848 r5:eea18a10 r4:eea18a18
> > > [ 1.308288] [<c045cc30>] (device_initial_probe) from [<c045bb58>] (bus_probe_device+0x8c/0x94)
> > > [ 1.316890] [<c045bacc>] (bus_probe_device) from [<c0459db8>] (device_add+0x40c/0x5a0)
> > > [ 1.324796] r7:c0b0a4c8 r6:eea18a10 r5:ee993810 r4:eea18a18
> > > [ 1.330450] [<c04599ac>] (device_add) from [<c0582a58>] (of_device_add+0x3c/0x44)
> > > [ 1.337926] r10:00000000 r9:c07759d8 r8:00000000 r7:eedf1d54 r6:ee993810 r5:00000000
> > > [ 1.345743] r4:eea18a00
> > > [ 1.348277] [<c0582a1c>] (of_device_add) from [<c0582f80>] (of_platform_device_create_pdata+0x7c/0xac)
> > > [ 1.357572] [<c0582f04>] (of_platform_device_create_pdata) from [<c0583100>] (of_platform_bus_create+0xf4/0x1f0)
> > > [ 1.367734] r9:c07759d8 r8:00000000 r7:00000001 r6:00000000 r5:eedf1d04 r4:00000000
> > > [ 1.375469] [<c058300c>] (of_platform_bus_create) from [<c058315c>] (of_platform_bus_create+0x150/0x1f0)
> > > [ 1.384938] r10:ee993810 r9:c07759d8 r8:00000000 r7:00000001 r6:00000000 r5:eedefe1c
> > > [ 1.392754] r4:eedf1d04
> > > [ 1.395289] [<c058300c>] (of_platform_bus_create) from [<c0583374>] (of_platform_populate+0x74/0xd4)
> > > [ 1.404411] r10:00000001 r9:00000000 r8:00000000 r7:c07759d8 r6:00000000 r5:eedee844
> > > [ 1.412228] r4:eedefe1c
> > > [ 1.414769] [<c0583300>] (of_platform_populate) from [<c0a25ee8>] (of_platform_default_populate_init+0x80/0x94)
> > > [ 1.424844] r10:c0a37848 r9:00000000 r8:c0b59680 r7:c0a37834 r6:ffffe000 r5:c0775ce8
> > > [ 1.432661] r4:00000000
> > > [ 1.435200] [<c0a25e68>] (of_platform_default_populate_init) from [<c0102794>] (do_one_initcall+0x5c/0x194)
> > > [ 1.444925] r5:c0a25e68 r4:c0b0a4c8
> > > [ 1.448506] [<c0102738>] (do_one_initcall) from [<c0a00f88>] (kernel_init_freeable+0x1d4/0x268)
> > > [ 1.457195] r9:00000004 r8:c0b59680 r7:c0a37834 r6:c0b59680 r5:c0a47308 r4:c090cfb8
> > > [ 1.464932] [<c0a00db4>] (kernel_init_freeable) from [<c06cf3b0>] (kernel_init+0x10/0x118)
> > > [ 1.473187] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c06cf3a0
> > > [ 1.481004] r4:00000000
> > > [ 1.483540] [<c06cf3a0>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
> > > [ 1.491098] Exception stack(0xee845fb0 to 0xee845ff8)
> > > [ 1.496146] 5fa0: 00000000 00000000 00000000 00000000
> > > [ 1.504313] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> > > [ 1.512480] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> > > [ 1.519084] r5:c06cf3a0 r4:00000000
> > > [ 1.522737] ARM CCI_400_r1 PMU driver probed
> > >
> > > And only CPU 0 show up.
> >
> > This looks more like a bug in the CCI code, and not in this serie
> > itself. Can you share your whole boot logs?
> >
>
> This week end I will retry and send it.
By any chance, did you try it again? Can you reproduce it on your side?
Thank you in advance,
Best regards,
--
Myl?ne Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 0/4] Sunxi: Add SMP support on A83T
2017-12-27 15:07 ` Mylene JOSSERAND
@ 2017-12-28 20:31 ` Corentin Labbe
2017-12-29 11:04 ` Mylene JOSSERAND
0 siblings, 1 reply; 17+ messages in thread
From: Corentin Labbe @ 2017-12-28 20:31 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Dec 27, 2017 at 04:07:29PM +0100, Mylene JOSSERAND wrote:
> Hello Corentin,
>
> Le Fri, 15 Dec 2017 07:10:46 +0100,
> Corentin Labbe <clabbe.montjoie@gmail.com> a ?crit :
> > On Tue, Dec 12, 2017 at 09:24:25AM +0100, Maxime Ripard wrote:
> > > Hi,
> > >
> > > On Mon, Dec 11, 2017 at 08:35:34PM +0100, Corentin Labbe wrote:
> > > > On Mon, Dec 11, 2017 at 08:49:57AM +0100, Myl?ne Josserand wrote:
> > > > > This series adds SMP support for Allwinner Sun8i-a83t
> > > > > with MCPM (Multi-Cluster Power Management).
> > > > > Series information:
> > > > > - Based on last linux-next (next-20171211)
> > > > > - Had dependencies on Chen Yu's patch that add MCPM
> > > > > support:
> > > > > https://patchwork.kernel.org/patch/6402801/
> > > > >
> > > > > Patch 01: Convert the mcpm driver (initially for A80) to be able
> > > > > to use it for A83T. This SoC has a bit flip that needs to be handled.
> > > > > Patch 02: Add registers nodes (prcm, cpucfg and r_cpucfg) needed
> > > > > for MCPM.
> > > > > Patch 03: Add CCI-400 node for a83t.
> > > > > Patch 04: Fix the use of virtual timers that hangs the kernel in
> > > > > case of SMP support.
> > > >
> > > > As we discussed in private, Chen Yu's patch should be added in your series.
> > >
> > > Not really, she mentionned the dependency in the cover letter, and
> > > it's a good way to do things too. Sure, you can do it your way, but
> > > there's no preference.
> > >
> >
> > If the goal of this series is to be applied, the dependency must be applied also.
> > And since the dependency is 2 years old (and part of a serie which does not apply now), I think cherry picking the patch and send it for review is better.
> >
> > > > Furthermore, MCPM is not automaticaly selected via imply.
> > >
> > > Well, yes, is that an issue?
> > >
> >
> > After reading the imply documentation, no.
> >
> > > > With all patchs I hit a bug:
> > > > [ 0.898668] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
> > >
> > > I guess this is with CONFIG_PROVE_LOCKING enabled?
> > >
> >
> > No, the BUG() printed is enabled by default
> >
> > > > [ 0.911162] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
> > > > [ 0.917776] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-next-20171211+ #73
> > >
> > > What are the changes you've made?
> > >
> >
> > Just adding wens's patch and this series.
>
> I tried to reproduce your issue without success (even with
> CONFIG_PROVE_LOCKING enabled, just in case).
> Can you give me more details about your tests? which defconfig and
> additional configurations?
>
> >
> > > > [ 0.925418] Hardware name: Allwinner sun8i Family
> > > > [ 0.930118] Backtrace:
> > > > [ 0.932596] [<c010cc50>] (dump_backtrace) from [<c010cf0c>] (show_stack+0x18/0x1c)
> > > > [ 0.940158] r7:c0b261e4 r6:60000013 r5:00000000 r4:c0b51958
> > > > [ 0.945820] [<c010cef4>] (show_stack) from [<c06baccc>] (dump_stack+0x8c/0xa0)
> > > > [ 0.953045] [<c06bac40>] (dump_stack) from [<c0149d40>] (___might_sleep+0x150/0x170)
> > > > [ 0.960779] r7:c0b261e4 r6:00000000 r5:000000ee r4:ee844000
> > > > [ 0.966437] [<c0149bf0>] (___might_sleep) from [<c0149dc8>] (__might_sleep+0x68/0xa0)
> > > > [ 0.974253] r4:c0861690
> > > > [ 0.976796] [<c0149d60>] (__might_sleep) from [<c06d2918>] (mutex_lock+0x24/0x68)
> > > > [ 0.984269] r6:c0892f6c r5:ffffffff r4:c0b1bb24
> > > > [ 0.988891] [<c06d28f4>] (mutex_lock) from [<c01ccb6c>] (perf_pmu_register+0x24/0x3e4)
> > > > [ 0.996795] r5:ffffffff r4:ee98b014
> > > > [ 1.000375] [<c01ccb48>] (perf_pmu_register) from [<c03efabc>] (cci_pmu_probe+0x340/0x484)
> > > > [ 1.008631] r10:c0892f6c r9:c0bfd5f0 r8:eea19010 r7:c0b261e4 r6:c0b26240 r5:eea19000
> > > > [ 1.016447] r4:ee98b010
> > > > [ 1.018989] [<c03ef77c>] (cci_pmu_probe) from [<c045e21c>] (platform_drv_probe+0x58/0xb8)
> > > > [ 1.027158] r10:00000000 r9:c0b2610c r8:00000000 r7:fffffdfb r6:c0b2610c r5:ffffffed
> > > > [ 1.034974] r4:eea19010
> > > > [ 1.037511] [<c045e1c4>] (platform_drv_probe) from [<c045c984>] (driver_probe_device+0x254/0x330)
> > > > [ 1.046371] r7:00000000 r6:c0bff498 r5:c0bff494 r4:eea19010
> > > > [ 1.052026] [<c045c730>] (driver_probe_device) from [<c045cbc4>] (__device_attach_driver+0xa0/0xd4)
> > > > [ 1.061062] r10:00000000 r9:c0bff470 r8:00000000 r7:00000001 r6:eea19010 r5:ee845ac0
> > > > [ 1.068879] r4:c0b2610c r3:00000000
> > > > [ 1.072454] [<c045cb24>] (__device_attach_driver) from [<c045ad68>] (bus_for_each_drv+0x68/0x9c)
> > > > [ 1.081228] r7:00000001 r6:c045cb24 r5:ee845ac0 r4:00000000
> > > > [ 1.086883] [<c045ad00>] (bus_for_each_drv) from [<c045c60c>] (__device_attach+0xb8/0x11c)
> > > > [ 1.095135] r6:c0b3e848 r5:eea19044 r4:eea19010
> > > > [ 1.099750] [<c045c554>] (__device_attach) from [<c045cc44>] (device_initial_probe+0x14/0x18)
> > > > [ 1.108263] r7:c0b0a4c8 r6:c0b3e848 r5:eea19010 r4:eea19018
> > > > [ 1.113919] [<c045cc30>] (device_initial_probe) from [<c045bb58>] (bus_probe_device+0x8c/0x94)
> > > > [ 1.122523] [<c045bacc>] (bus_probe_device) from [<c0459db8>] (device_add+0x40c/0x5a0)
> > > > [ 1.130429] r7:c0b0a4c8 r6:eea19010 r5:eea18a10 r4:eea19018
> > > > [ 1.136089] [<c04599ac>] (device_add) from [<c0582a58>] (of_device_add+0x3c/0x44)
> > > > [ 1.143564] r10:00000000 r9:00000000 r8:00000000 r7:eedf21a4 r6:eea18a10 r5:00000000
> > > > [ 1.151380] r4:eea19000
> > > > [ 1.153915] [<c0582a1c>] (of_device_add) from [<c0582f80>] (of_platform_device_create_pdata+0x7c/0xac)
> > > > [ 1.163210] [<c0582f04>] (of_platform_device_create_pdata) from [<c0583100>] (of_platform_bus_create+0xf4/0x1f0)
> > > > [ 1.173372] r9:00000000 r8:00000000 r7:00000001 r6:00000000 r5:eedf2154 r4:00000000
> > > > [ 1.181107] [<c058300c>] (of_platform_bus_create) from [<c0583374>] (of_platform_populate+0x74/0xd4)
> > > > [ 1.190229] r10:00000001 r9:eea18a10 r8:00000000 r7:00000000 r6:00000000 r5:eedf1d04
> > > > [ 1.198045] r4:eedf2154
> > > > [ 1.200580] [<c0583300>] (of_platform_populate) from [<c03ef2a8>] (cci_platform_probe+0x3c/0x54)
> > > > [ 1.209356] r10:00000000 r9:c0b26168 r8:00000000 r7:fffffdfb r6:c0b26168 r5:ffffffed
> > > > [ 1.217172] r4:eea18a00
> > > > [ 1.219708] [<c03ef26c>] (cci_platform_probe) from [<c045e21c>] (platform_drv_probe+0x58/0xb8)
> > > > [ 1.228306] r5:ffffffed r4:eea18a10
> > > > [ 1.231881] [<c045e1c4>] (platform_drv_probe) from [<c045c984>] (driver_probe_device+0x254/0x330)
> > > > [ 1.240742] r7:00000000 r6:c0bff498 r5:c0bff494 r4:eea18a10
> > > > [ 1.246397] [<c045c730>] (driver_probe_device) from [<c045cbc4>] (__device_attach_driver+0xa0/0xd4)
> > > > [ 1.255433] r10:00000000 r9:c0bff470 r8:00000000 r7:00000001 r6:eea18a10 r5:ee845ce8
> > > > [ 1.263250] r4:c0b26168 r3:00000000
> > > > [ 1.266825] [<c045cb24>] (__device_attach_driver) from [<c045ad68>] (bus_for_each_drv+0x68/0x9c)
> > > > [ 1.275598] r7:00000001 r6:c045cb24 r5:ee845ce8 r4:00000000
> > > > [ 1.281253] [<c045ad00>] (bus_for_each_drv) from [<c045c60c>] (__device_attach+0xb8/0x11c)
> > > > [ 1.289506] r6:c0b3e848 r5:eea18a44 r4:eea18a10
> > > > [ 1.294120] [<c045c554>] (__device_attach) from [<c045cc44>] (device_initial_probe+0x14/0x18)
> > > > [ 1.302633] r7:c0b0a4c8 r6:c0b3e848 r5:eea18a10 r4:eea18a18
> > > > [ 1.308288] [<c045cc30>] (device_initial_probe) from [<c045bb58>] (bus_probe_device+0x8c/0x94)
> > > > [ 1.316890] [<c045bacc>] (bus_probe_device) from [<c0459db8>] (device_add+0x40c/0x5a0)
> > > > [ 1.324796] r7:c0b0a4c8 r6:eea18a10 r5:ee993810 r4:eea18a18
> > > > [ 1.330450] [<c04599ac>] (device_add) from [<c0582a58>] (of_device_add+0x3c/0x44)
> > > > [ 1.337926] r10:00000000 r9:c07759d8 r8:00000000 r7:eedf1d54 r6:ee993810 r5:00000000
> > > > [ 1.345743] r4:eea18a00
> > > > [ 1.348277] [<c0582a1c>] (of_device_add) from [<c0582f80>] (of_platform_device_create_pdata+0x7c/0xac)
> > > > [ 1.357572] [<c0582f04>] (of_platform_device_create_pdata) from [<c0583100>] (of_platform_bus_create+0xf4/0x1f0)
> > > > [ 1.367734] r9:c07759d8 r8:00000000 r7:00000001 r6:00000000 r5:eedf1d04 r4:00000000
> > > > [ 1.375469] [<c058300c>] (of_platform_bus_create) from [<c058315c>] (of_platform_bus_create+0x150/0x1f0)
> > > > [ 1.384938] r10:ee993810 r9:c07759d8 r8:00000000 r7:00000001 r6:00000000 r5:eedefe1c
> > > > [ 1.392754] r4:eedf1d04
> > > > [ 1.395289] [<c058300c>] (of_platform_bus_create) from [<c0583374>] (of_platform_populate+0x74/0xd4)
> > > > [ 1.404411] r10:00000001 r9:00000000 r8:00000000 r7:c07759d8 r6:00000000 r5:eedee844
> > > > [ 1.412228] r4:eedefe1c
> > > > [ 1.414769] [<c0583300>] (of_platform_populate) from [<c0a25ee8>] (of_platform_default_populate_init+0x80/0x94)
> > > > [ 1.424844] r10:c0a37848 r9:00000000 r8:c0b59680 r7:c0a37834 r6:ffffe000 r5:c0775ce8
> > > > [ 1.432661] r4:00000000
> > > > [ 1.435200] [<c0a25e68>] (of_platform_default_populate_init) from [<c0102794>] (do_one_initcall+0x5c/0x194)
> > > > [ 1.444925] r5:c0a25e68 r4:c0b0a4c8
> > > > [ 1.448506] [<c0102738>] (do_one_initcall) from [<c0a00f88>] (kernel_init_freeable+0x1d4/0x268)
> > > > [ 1.457195] r9:00000004 r8:c0b59680 r7:c0a37834 r6:c0b59680 r5:c0a47308 r4:c090cfb8
> > > > [ 1.464932] [<c0a00db4>] (kernel_init_freeable) from [<c06cf3b0>] (kernel_init+0x10/0x118)
> > > > [ 1.473187] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c06cf3a0
> > > > [ 1.481004] r4:00000000
> > > > [ 1.483540] [<c06cf3a0>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
> > > > [ 1.491098] Exception stack(0xee845fb0 to 0xee845ff8)
> > > > [ 1.496146] 5fa0: 00000000 00000000 00000000 00000000
> > > > [ 1.504313] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> > > > [ 1.512480] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> > > > [ 1.519084] r5:c06cf3a0 r4:00000000
> > > > [ 1.522737] ARM CCI_400_r1 PMU driver probed
> > > >
> > > > And only CPU 0 show up.
> > >
> > > This looks more like a bug in the CCI code, and not in this serie
> > > itself. Can you share your whole boot logs?
> > >
> >
> > This week end I will retry and send it.
>
> By any chance, did you try it again? Can you reproduce it on your side?
>
Hello
With the .config that you give me in private, everything seems to work.
But with mine, the stacktrace still happen.
After some research, this is due to the following code:
cpumask_set_cpu(get_cpu(), &cci_pmu->cpus);
which disable preemption (via get_cpu())
So it is unrelated with your patch, I will send a bug report tomorow.
Furthermore, you can add:
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Thanks
Regards
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 0/4] Sunxi: Add SMP support on A83T
2017-12-28 20:31 ` Corentin Labbe
@ 2017-12-29 11:04 ` Mylene JOSSERAND
0 siblings, 0 replies; 17+ messages in thread
From: Mylene JOSSERAND @ 2017-12-29 11:04 UTC (permalink / raw)
To: linux-arm-kernel
Hello Corentin,
Le Thu, 28 Dec 2017 21:31:25 +0100,
Corentin Labbe <clabbe.montjoie@gmail.com> a ?crit :
[...]
> Hello
>
> With the .config that you give me in private, everything seems to work.
> But with mine, the stacktrace still happen.
> After some research, this is due to the following code:
> cpumask_set_cpu(get_cpu(), &cci_pmu->cpus);
> which disable preemption (via get_cpu())
>
> So it is unrelated with your patch, I will send a bug report tomorow.
Okay, great to know that it is not related to my patches.
>
> Furthermore, you can add:
> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Thanks, I have just sent a V2. I did not add your tested-by because
I have done some modifications. Could you test this new series and give
me your tested-by again? It would be great!
Thank you in advance,
Best regards,
Myl?ne
--
Myl?ne Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 0/4] Sunxi: Add SMP support on A83T
2017-12-11 19:35 ` [PATCH 0/4] Sunxi: Add SMP support on A83T Corentin Labbe
2017-12-12 8:19 ` Mylene JOSSERAND
2017-12-12 8:24 ` Maxime Ripard
@ 2017-12-12 9:40 ` Mylene JOSSERAND
2017-12-12 10:01 ` Mylene JOSSERAND
2 siblings, 1 reply; 17+ messages in thread
From: Mylene JOSSERAND @ 2017-12-12 9:40 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Le Mon, 11 Dec 2017 20:35:34 +0100,
Corentin Labbe <clabbe.montjoie@gmail.com> a ?crit :
> On Mon, Dec 11, 2017 at 08:49:57AM +0100, Myl?ne Josserand wrote:
> > Hello everyone,
> >
> > This series adds SMP support for Allwinner Sun8i-a83t
> > with MCPM (Multi-Cluster Power Management).
> > Series information:
> > - Based on last linux-next (next-20171211)
> > - Had dependencies on Chen Yu's patch that add MCPM
> > support:
> > https://patchwork.kernel.org/patch/6402801/
> >
> > Patch 01: Convert the mcpm driver (initially for A80) to be able
> > to use it for A83T. This SoC has a bit flip that needs to be
> > handled. Patch 02: Add registers nodes (prcm, cpucfg and r_cpucfg)
> > needed for MCPM.
> > Patch 03: Add CCI-400 node for a83t.
> > Patch 04: Fix the use of virtual timers that hangs the kernel in
> > case of SMP support.
> >
> > If you have any remarks/questions, let me know.
> > Thank you in advance,
> > Myl?ne
> >
>
> Hello
>
> As we discussed in private, Chen Yu's patch should be added in your
> series.
>
> Furthermore, MCPM is not automaticaly selected via imply.
>
> With all patchs I hit a bug:
> [ 0.898668] BUG: sleeping function called from invalid context at
> kernel/locking/mutex.c:238 [ 0.911162] in_atomic(): 1,
> irqs_disabled(): 0, pid: 1, name: swapper/0 [ 0.917776] CPU: 0
> PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-next-20171211+ #73
> [ 0.925418] Hardware name: Allwinner sun8i Family [ 0.930118]
> Backtrace: [ 0.932596] [<c010cc50>] (dump_backtrace) from
> [<c010cf0c>] (show_stack+0x18/0x1c) [ 0.940158] r7:c0b261e4
> r6:60000013 r5:00000000 r4:c0b51958 [ 0.945820] [<c010cef4>]
> (show_stack) from [<c06baccc>] (dump_stack+0x8c/0xa0) [ 0.953045]
> [<c06bac40>] (dump_stack) from [<c0149d40>]
> (___might_sleep+0x150/0x170) [ 0.960779] r7:c0b261e4 r6:00000000
> r5:000000ee r4:ee844000 [ 0.966437] [<c0149bf0>] (___might_sleep)
> from [<c0149dc8>] (__might_sleep+0x68/0xa0) [ 0.974253]
> r4:c0861690 [ 0.976796] [<c0149d60>] (__might_sleep) from
> [<c06d2918>] (mutex_lock+0x24/0x68) [ 0.984269] r6:c0892f6c
> r5:ffffffff r4:c0b1bb24 [ 0.988891] [<c06d28f4>] (mutex_lock) from
> [<c01ccb6c>] (perf_pmu_register+0x24/0x3e4) [ 0.996795]
> r5:ffffffff r4:ee98b014 [ 1.000375] [<c01ccb48>]
> (perf_pmu_register) from [<c03efabc>] (cci_pmu_probe+0x340/0x484)
> [ 1.008631] r10:c0892f6c r9:c0bfd5f0 r8:eea19010 r7:c0b261e4
> r6:c0b26240 r5:eea19000 [ 1.016447] r4:ee98b010 [ 1.018989]
> [<c03ef77c>] (cci_pmu_probe) from [<c045e21c>]
> (platform_drv_probe+0x58/0xb8) [ 1.027158] r10:00000000
> r9:c0b2610c r8:00000000 r7:fffffdfb r6:c0b2610c r5:ffffffed
> [ 1.034974] r4:eea19010 [ 1.037511] [<c045e1c4>]
> (platform_drv_probe) from [<c045c984>]
> (driver_probe_device+0x254/0x330) [ 1.046371] r7:00000000
> r6:c0bff498 r5:c0bff494 r4:eea19010 [ 1.052026] [<c045c730>]
> (driver_probe_device) from [<c045cbc4>]
> (__device_attach_driver+0xa0/0xd4) [ 1.061062] r10:00000000
> r9:c0bff470 r8:00000000 r7:00000001 r6:eea19010 r5:ee845ac0
> [ 1.068879] r4:c0b2610c r3:00000000 [ 1.072454] [<c045cb24>]
> (__device_attach_driver) from [<c045ad68>]
> (bus_for_each_drv+0x68/0x9c) [ 1.081228] r7:00000001 r6:c045cb24
> r5:ee845ac0 r4:00000000 [ 1.086883] [<c045ad00>]
> (bus_for_each_drv) from [<c045c60c>] (__device_attach+0xb8/0x11c)
> [ 1.095135] r6:c0b3e848 r5:eea19044 r4:eea19010 [ 1.099750]
> [<c045c554>] (__device_attach) from [<c045cc44>]
> (device_initial_probe+0x14/0x18) [ 1.108263] r7:c0b0a4c8
> r6:c0b3e848 r5:eea19010 r4:eea19018 [ 1.113919] [<c045cc30>]
> (device_initial_probe) from [<c045bb58>] (bus_probe_device+0x8c/0x94)
> [ 1.122523] [<c045bacc>] (bus_probe_device) from [<c0459db8>]
> (device_add+0x40c/0x5a0) [ 1.130429] r7:c0b0a4c8 r6:eea19010
> r5:eea18a10 r4:eea19018 [ 1.136089] [<c04599ac>] (device_add) from
> [<c0582a58>] (of_device_add+0x3c/0x44) [ 1.143564] r10:00000000
> r9:00000000 r8:00000000 r7:eedf21a4 r6:eea18a10 r5:00000000
> [ 1.151380] r4:eea19000 [ 1.153915] [<c0582a1c>]
> (of_device_add) from [<c0582f80>]
> (of_platform_device_create_pdata+0x7c/0xac) [ 1.163210]
> [<c0582f04>] (of_platform_device_create_pdata) from [<c0583100>]
> (of_platform_bus_create+0xf4/0x1f0) [ 1.173372] r9:00000000
> r8:00000000 r7:00000001 r6:00000000 r5:eedf2154 r4:00000000
> [ 1.181107] [<c058300c>] (of_platform_bus_create) from
> [<c0583374>] (of_platform_populate+0x74/0xd4) [ 1.190229]
> r10:00000001 r9:eea18a10 r8:00000000 r7:00000000 r6:00000000
> r5:eedf1d04 [ 1.198045] r4:eedf2154 [ 1.200580] [<c0583300>]
> (of_platform_populate) from [<c03ef2a8>]
> (cci_platform_probe+0x3c/0x54) [ 1.209356] r10:00000000
> r9:c0b26168 r8:00000000 r7:fffffdfb r6:c0b26168 r5:ffffffed
> [ 1.217172] r4:eea18a00 [ 1.219708] [<c03ef26c>]
> (cci_platform_probe) from [<c045e21c>] (platform_drv_probe+0x58/0xb8)
> [ 1.228306] r5:ffffffed r4:eea18a10 [ 1.231881] [<c045e1c4>]
> (platform_drv_probe) from [<c045c984>]
> (driver_probe_device+0x254/0x330) [ 1.240742] r7:00000000
> r6:c0bff498 r5:c0bff494 r4:eea18a10 [ 1.246397] [<c045c730>]
> (driver_probe_device) from [<c045cbc4>]
> (__device_attach_driver+0xa0/0xd4) [ 1.255433] r10:00000000
> r9:c0bff470 r8:00000000 r7:00000001 r6:eea18a10 r5:ee845ce8
> [ 1.263250] r4:c0b26168 r3:00000000 [ 1.266825] [<c045cb24>]
> (__device_attach_driver) from [<c045ad68>]
> (bus_for_each_drv+0x68/0x9c) [ 1.275598] r7:00000001 r6:c045cb24
> r5:ee845ce8 r4:00000000 [ 1.281253] [<c045ad00>]
> (bus_for_each_drv) from [<c045c60c>] (__device_attach+0xb8/0x11c)
> [ 1.289506] r6:c0b3e848 r5:eea18a44 r4:eea18a10 [ 1.294120]
> [<c045c554>] (__device_attach) from [<c045cc44>]
> (device_initial_probe+0x14/0x18) [ 1.302633] r7:c0b0a4c8
> r6:c0b3e848 r5:eea18a10 r4:eea18a18 [ 1.308288] [<c045cc30>]
> (device_initial_probe) from [<c045bb58>] (bus_probe_device+0x8c/0x94)
> [ 1.316890] [<c045bacc>] (bus_probe_device) from [<c0459db8>]
> (device_add+0x40c/0x5a0) [ 1.324796] r7:c0b0a4c8 r6:eea18a10
> r5:ee993810 r4:eea18a18 [ 1.330450] [<c04599ac>] (device_add) from
> [<c0582a58>] (of_device_add+0x3c/0x44) [ 1.337926] r10:00000000
> r9:c07759d8 r8:00000000 r7:eedf1d54 r6:ee993810 r5:00000000
> [ 1.345743] r4:eea18a00 [ 1.348277] [<c0582a1c>]
> (of_device_add) from [<c0582f80>]
> (of_platform_device_create_pdata+0x7c/0xac) [ 1.357572]
> [<c0582f04>] (of_platform_device_create_pdata) from [<c0583100>]
> (of_platform_bus_create+0xf4/0x1f0) [ 1.367734] r9:c07759d8
> r8:00000000 r7:00000001 r6:00000000 r5:eedf1d04 r4:00000000
> [ 1.375469] [<c058300c>] (of_platform_bus_create) from
> [<c058315c>] (of_platform_bus_create+0x150/0x1f0) [ 1.384938]
> r10:ee993810 r9:c07759d8 r8:00000000 r7:00000001 r6:00000000
> r5:eedefe1c [ 1.392754] r4:eedf1d04 [ 1.395289] [<c058300c>]
> (of_platform_bus_create) from [<c0583374>]
> (of_platform_populate+0x74/0xd4) [ 1.404411] r10:00000001
> r9:00000000 r8:00000000 r7:c07759d8 r6:00000000 r5:eedee844
> [ 1.412228] r4:eedefe1c [ 1.414769] [<c0583300>]
> (of_platform_populate) from [<c0a25ee8>]
> (of_platform_default_populate_init+0x80/0x94) [ 1.424844]
> r10:c0a37848 r9:00000000 r8:c0b59680 r7:c0a37834 r6:ffffe000
> r5:c0775ce8 [ 1.432661] r4:00000000 [ 1.435200] [<c0a25e68>]
> (of_platform_default_populate_init) from [<c0102794>]
> (do_one_initcall+0x5c/0x194) [ 1.444925] r5:c0a25e68 r4:c0b0a4c8
> [ 1.448506] [<c0102738>] (do_one_initcall) from [<c0a00f88>]
> (kernel_init_freeable+0x1d4/0x268) [ 1.457195] r9:00000004
> r8:c0b59680 r7:c0a37834 r6:c0b59680 r5:c0a47308 r4:c090cfb8
> [ 1.464932] [<c0a00db4>] (kernel_init_freeable) from [<c06cf3b0>]
> (kernel_init+0x10/0x118) [ 1.473187] r10:00000000 r9:00000000
> r8:00000000 r7:00000000 r6:00000000 r5:c06cf3a0 [ 1.481004]
> r4:00000000 [ 1.483540] [<c06cf3a0>] (kernel_init) from
> [<c01010e8>] (ret_from_fork+0x14/0x2c) [ 1.491098] Exception
> stack(0xee845fb0 to 0xee845ff8) [ 1.496146]
> 5fa0: 00000000 00000000 00000000
> 00000000 [ 1.504313] 5fc0: 00000000 00000000 00000000 00000000
> 00000000 00000000 00000000 00000000 [ 1.512480] 5fe0: 00000000
> 00000000 00000000 00000000 00000013 00000000 [ 1.519084]
> r5:c06cf3a0 r4:00000000 [ 1.522737] ARM CCI_400_r1 PMU driver
> probed
I have done further tests.
I booted a previous kernel that I know it was working fine (kernel
v4.13) then, I booted the kernel with this series and it worked just
fine.
Only after a power cycle, I am able to reproduce the error, otherwise,
it is working well. See the boot log of this two tests:
http://code.bulix.org/7kr0e0-239697?raw
So I really tested this series but I did not do any power-cycle between
my tests (only reboots). I will investigate on it.
Best regards,
--
Myl?ne Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 0/4] Sunxi: Add SMP support on A83T
2017-12-12 9:40 ` Mylene JOSSERAND
@ 2017-12-12 10:01 ` Mylene JOSSERAND
0 siblings, 0 replies; 17+ messages in thread
From: Mylene JOSSERAND @ 2017-12-12 10:01 UTC (permalink / raw)
To: linux-arm-kernel
Le Tue, 12 Dec 2017 10:40:25 +0100,
Mylene JOSSERAND <mylene.josserand@free-electrons.com> a ?crit :
[...]
> I have done further tests.
>
> I booted a previous kernel that I know it was working fine (kernel
> v4.13) then, I booted the kernel with this series and it worked just
> fine.
>
> Only after a power cycle, I am able to reproduce the error, otherwise,
> it is working well. See the boot log of this two tests:
> http://code.bulix.org/7kr0e0-239697?raw
I wrote this mail too fast, I am wrong, the error I had/copied is not
the same error than Corentin is having (and I have 8 CPUS up).
--
Myl?ne Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 17+ messages in thread