From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Wed, 13 Dec 2017 11:42:21 +0100 Subject: [PATCH] arm64: allwinner: a64: a64-olinuxino: add usb otg In-Reply-To: References: <1513058169-25516-1-git-send-email-jagan@amarulasolutions.com> <20171212081335.3qkqcofdbcfuu5zh@flea.lan> Message-ID: <20171213104221.zrpwlayahzd7m4fh@flea.lan> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Dec 12, 2017 at 02:57:01PM +0530, Jagan Teki wrote: > On Tue, Dec 12, 2017 at 1:43 PM, Maxime Ripard > wrote: > > Hi, > > > > On Tue, Dec 12, 2017 at 11:26:09AM +0530, Jagan Teki wrote: > >> Add usb otg support for a64-olinuxino board, > >> - USB0-ID connected with PH9 > >> - USB0-VBUSDET connected with PH6 > >> - USB-DRVVBUS controlled by N_VBUSEN pin from PMIC > >> > >> Signed-off-by: Jagan Teki > > > > How was this tested? Did you test the OTG part, or only the peripheral > > part? > > Yes peripheral. Please test the switching between host and peripheral then, and the same comment applies to your bananapi-m64. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: