From: hao5781286@gmail.com (hao_zhang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/4] pwm support for allwinner sun8i R40/V40/T3 SOCs.
Date: Wed, 13 Dec 2017 22:38:40 +0800 [thread overview]
Message-ID: <20171213143840.GA17754@arx-s1> (raw)
This patchset add pwm support for allwinner sun8i R40/V40/T3 SOCs.
all has been teat on T3 board.
Some features
8 PWM channels outputs(4 PWM pairs)
Supports capturing input
Supports three kinds of output waveforms: continuous waveform, pulse
waveform and complementarity pair
Programmable deadzone generator and controllable dead-time
0% to 100% adjustable duty cycle
Up to 24/100MHz output frequency
Minimum resolution is 1/65536
Supports interrupt for PWM output and capturing input
DOC:
https://github.com/tinalinux/docs/blob/r40-v1.y/Allwinner_R40_User_Manual_V1.0.pdf
https://github.com/tinalinux/docs/blob/r40-v1.y/R40_Datasheet_V1.0.pdf
Regards;-)
Hao Zhang
hao_zhang (4):
dt-bindings: pwm: binding allwinner R40, V40, T3
ARM: PWM: add allwinner sun8i R40/V40/T3 pwm support.
ARM: dts: add pwm node for r40.
ARM: pinctrl: sunxi-pinctrl: fix pin funtion can not be match
correctly.
.../devicetree/bindings/pwm/pwm-sun8i.txt | 18 +
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 6 +
arch/arm/boot/dts/sun8i-r40.dtsi | 13 +
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 6 +-
drivers/pwm/Kconfig | 10 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-sun8i-r40.c | 449 +++++++++++++++++++++
7 files changed, 501 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pwm/pwm-sun8i.txt
create mode 100644 drivers/pwm/pwm-sun8i-r40.c
--
2.7.4
reply other threads:[~2017-12-13 14:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171213143840.GA17754@arx-s1 \
--to=hao5781286@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).