[PATCH 01/25] arm: artpec: dts: Remove leading 0x and 0s from bindings notation

[PATCH 01/25] arm: artpec: dts: Remove leading 0x and 0s from bindings notation

[Mathieu Malaterre]

Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

and

Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C

For simplicity, two sed expressions were used to solve each warnings separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This will solve as a side effect warning:

Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"

This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")

Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
 arch/arm/boot/dts/artpec6.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
index 2ed11773048d..71e0e75e986b 100644
--- a/arch/arm/boot/dts/artpec6.dtsi
+++ b/arch/arm/boot/dts/artpec6.dtsi
@@ -98,7 +98,7 @@
 		clock-frequency = <125000000>;
 	};
 
-	clkctrl: clkctrl at 0xf8000000 {
+	clkctrl: clkctrl at f8000000 {
 		#clock-cells = <1>;
 		compatible = "axis,artpec6-clkctrl";
 		reg = <0xf8000000 0x48>;
-- 
2.11.0

[PATCH 01/25] arm: artpec: dts: Remove leading 0x and 0s from bindings notation

[Jesper Nilsson]

On Fri, Dec 15, 2017 at 01:46:21PM +0100, Mathieu Malaterre wrote:
> Improve the DTS files by removing all the leading "0x" and zeros to fix the
> following dtc warnings:
> 
> Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
> 
> and
> 
> Warning (unit_address_format): Node /XXX unit name should not have leading 0s
> 
> Converted using the following command:
> 
> find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
> 
> For simplicity, two sed expressions were used to solve each warnings separately.
> 
> To make the regex expression more robust a few other issues were resolved,
> namely setting unit-address to lower case, and adding a whitespace before the
> the opening curly brace:
> 
> https://elinux.org/Device_Tree_Linux#Linux_conventions
> 
> This will solve as a side effect warning:
> 
> Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
> 
> This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
> 
> Reported-by: David Daney <ddaney@caviumnetworks.com>
> Suggested-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Mathieu Malaterre <malat@debian.org>

Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>

> ---
>  arch/arm/boot/dts/artpec6.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
> index 2ed11773048d..71e0e75e986b 100644
> --- a/arch/arm/boot/dts/artpec6.dtsi
> +++ b/arch/arm/boot/dts/artpec6.dtsi
> @@ -98,7 +98,7 @@
>  		clock-frequency = <125000000>;
>  	};
>  
> -	clkctrl: clkctrl at 0xf8000000 {
> +	clkctrl: clkctrl at f8000000 {
>  		#clock-cells = <1>;
>  		compatible = "axis,artpec6-clkctrl";
>  		reg = <0xf8000000 0x48>;
> -- 
> 2.11.0

/^JN - Jesper Nilsson
-- 
               Jesper Nilsson -- jesper.nilsson at axis.com