From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 26/36] KVM: arm64: Defer saving/restoring system registers to vcpu load/put on VHE
Date: Fri, 15 Dec 2017 17:29:29 +0100 [thread overview]
Message-ID: <20171215162929.GC910@cbox> (raw)
In-Reply-To: <c45eaebe-57a1-7737-c515-111d497dd06e@arm.com>
On Mon, Dec 11, 2017 at 01:20:03PM +0000, Marc Zyngier wrote:
> On 07/12/17 17:06, Christoffer Dall wrote:
> > Some system registers do not affect the host kernel's execution and can
> > therefore be loaded when we are about to run a VCPU and we don't have to
> > restore the host state to the hardware before the time when we are
> > actually about to return to userspace or schedule out the VCPU thread.
> >
> > The EL1 system registers and the userspace state registers, which only
> > affect EL0 execution, do not affect the host kernel's execution.
> >
> > The 32-bit system registers are not used by a VHE host kernel and
> > therefore don't need to be saved/restored on every entry/exit to/from
> > the guest, but can be deferred to vcpu_load and vcpu_put, respectively.
>
> Note that they are not used by the !VHE host kernel either, and I
> believe they could be deferred too, although that would imply a round
> trip to HYP to save/restore them. We already have such a hook there when
> configuring ICH_VMCR_EL2, so we may not need much of a new infrastructure.
>
This turned out to be a bit trickier than I initial thought, and I think
it also revealed a bug around running 32-bit guests on VHE systems,
related to how DBGVCR32_EL2 is currently handled.
The result will look something like this (depending a bit on the rework
for the system register accesses discussed in the earlier patch):
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index 0488841c6341..de98b99b1eec 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -92,13 +92,18 @@ static inline bool vcpu_mode_is_32bit(const struct kvm_vcpu *vcpu)
static inline void vcpu_set_spsr(struct kvm_vcpu *vcpu, u64 val)
{
if (vcpu_mode_is_32bit(vcpu)) {
- if (vcpu->arch.sysregs_loaded_on_cpu)
- __sysreg32_save_state(vcpu);
+ bool loaded;
+
+ preempt_disable();
+ loaded = vcpu->arch.sysregs32_loaded_on_cpu;
+ if (loaded)
+ kvm_call_hyp(__sysreg32_save_state, vcpu);
*vcpu_spsr32(vcpu) = val;
- if (vcpu->arch.sysregs_loaded_on_cpu)
- __sysreg32_restore_state(vcpu);
+ if (loaded)
+ kvm_call_hyp(__sysreg32_restore_state, vcpu);
+ preempt_enable();
}
if (vcpu->arch.sysregs_loaded_on_cpu)
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 992c19816893..bc116d6c8756 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -283,6 +283,7 @@ struct kvm_vcpu_arch {
/* True when deferrable sysregs are loaded on the physical CPU,
* see kvm_vcpu_load_sysregs and kvm_vcpu_put_sysregs. */
bool sysregs_loaded_on_cpu;
+ bool sysregs32_loaded_on_cpu;
};
#define vcpu_gp_regs(v) (&(v)->arch.ctxt.gp_regs)
diff --git a/arch/arm64/kvm/hyp/debug-sr.c b/arch/arm64/kvm/hyp/debug-sr.c
index ee87115eb12f..d80037b655b4 100644
--- a/arch/arm64/kvm/hyp/debug-sr.c
+++ b/arch/arm64/kvm/hyp/debug-sr.c
@@ -20,6 +20,7 @@
#include <asm/debug-monitors.h>
#include <asm/kvm_asm.h>
+#include <asm/kvm_emulate.h>
#include <asm/kvm_hyp.h>
#define read_debug(r,n) read_sysreg(r##n##_el1)
@@ -169,6 +170,9 @@ void __hyp_text __debug_switch_to_guest(struct kvm_vcpu *vcpu)
__debug_save_state(vcpu, host_dbg, host_ctxt);
__debug_restore_state(vcpu, guest_dbg, guest_ctxt);
+
+ if (vcpu_el1_is_32bit(vcpu))
+ write_sysreg(vcpu->arch.ctxt.sys_regs[DBGVCR32_EL2], dbgvcr32_el2);
}
void __hyp_text __debug_switch_to_host(struct kvm_vcpu *vcpu)
@@ -192,6 +196,9 @@ void __hyp_text __debug_switch_to_host(struct kvm_vcpu *vcpu)
__debug_save_state(vcpu, guest_dbg, guest_ctxt);
__debug_restore_state(vcpu, host_dbg, host_ctxt);
+ if (vcpu_el1_is_32bit(vcpu))
+ vcpu->arch.ctxt.sys_regs[DBGVCR32_EL2] = read_sysreg(dbgvcr32_el2);
+
vcpu->arch.debug_flags &= ~KVM_ARM64_DEBUG_DIRTY;
}
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 05f266b505ce..48dc2c0b10d0 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -402,7 +402,6 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu)
* We must restore the 32-bit state before the sysregs, thanks
* to erratum #852523 (Cortex-A57) or #853709 (Cortex-A72).
*/
- __sysreg32_restore_state(vcpu);
__sysreg_restore_state_nvhe(guest_ctxt);
__debug_switch_to_guest(vcpu);
@@ -414,7 +413,6 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu)
} while (fixup_guest_exit(vcpu, &exit_code));
__sysreg_save_state_nvhe(guest_ctxt);
- __sysreg32_save_state(vcpu);
__timer_disable_traps(vcpu);
__vgic_save_state(vcpu);
diff --git a/arch/arm64/kvm/hyp/sysreg-sr.c b/arch/arm64/kvm/hyp/sysreg-sr.c
index 3c62c1c14b22..42eb0cc68079 100644
--- a/arch/arm64/kvm/hyp/sysreg-sr.c
+++ b/arch/arm64/kvm/hyp/sysreg-sr.c
@@ -181,7 +181,9 @@ void __hyp_text __sysreg32_save_state(struct kvm_vcpu *vcpu)
{
u64 *spsr, *sysreg;
- if (!vcpu_el1_is_32bit(vcpu))
+ vcpu = kern_hyp_va(vcpu);
+
+ if (!vcpu_el1_is_32bit(vcpu) || !vcpu->arch.sysregs32_loaded_on_cpu)
return;
spsr = vcpu->arch.ctxt.gp_regs.spsr;
@@ -195,15 +197,18 @@ void __hyp_text __sysreg32_save_state(struct kvm_vcpu *vcpu)
sysreg[DACR32_EL2] = read_sysreg(dacr32_el2);
sysreg[IFSR32_EL2] = read_sysreg(ifsr32_el2);
- if (vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY)
- sysreg[DBGVCR32_EL2] = read_sysreg(dbgvcr32_el2);
+ sysreg[DBGVCR32_EL2] = read_sysreg(dbgvcr32_el2);
+
+ vcpu->arch.sysregs32_loaded_on_cpu = false;
}
void __hyp_text __sysreg32_restore_state(struct kvm_vcpu *vcpu)
{
u64 *spsr, *sysreg;
- if (!vcpu_el1_is_32bit(vcpu))
+ vcpu = kern_hyp_va(vcpu);
+
+ if (!vcpu_el1_is_32bit(vcpu) || vcpu->arch.sysregs32_loaded_on_cpu)
return;
spsr = vcpu->arch.ctxt.gp_regs.spsr;
@@ -217,8 +222,9 @@ void __hyp_text __sysreg32_restore_state(struct kvm_vcpu *vcpu)
write_sysreg(sysreg[DACR32_EL2], dacr32_el2);
write_sysreg(sysreg[IFSR32_EL2], ifsr32_el2);
- if (vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY)
- write_sysreg(sysreg[DBGVCR32_EL2], dbgvcr32_el2);
+ write_sysreg(sysreg[DBGVCR32_EL2], dbgvcr32_el2);
+
+ vcpu->arch.sysregs32_loaded_on_cpu = true;
}
/**
@@ -237,19 +243,19 @@ void kvm_vcpu_load_sysregs(struct kvm_vcpu *vcpu)
struct kvm_cpu_context *host_ctxt = vcpu->arch.host_cpu_context;
struct kvm_cpu_context *guest_ctxt = &vcpu->arch.ctxt;
+ /*
+ * Erratum #852523 (Cortex-A57) or #853709 (Cortex-A72) requires us to
+ * restore the 32-bit state before the sysregs, which will happen on
+ * both VHE (below) and on non-VHE in the world-switch path.
+ */
+ kvm_call_hyp(__sysreg32_restore_state, vcpu);
+
if (!has_vhe())
return;
__sysreg_save_user_state(host_ctxt);
-
- /*
- * Load guest EL1 and user state
- *
- * We must restore the 32-bit state before the sysregs, thanks
- * to erratum #852523 (Cortex-A57) or #853709 (Cortex-A72).
- */
- __sysreg32_restore_state(vcpu);
+ /* Load guest EL1 and user state */
__sysreg_restore_user_state(guest_ctxt);
__sysreg_restore_el1_state(guest_ctxt);
@@ -283,12 +289,13 @@ void kvm_vcpu_put_sysregs(struct kvm_vcpu *vcpu)
vcpu->arch.guest_vfp_loaded = 0;
}
+ kvm_call_hyp(__sysreg32_save_state, vcpu);
+
if (!has_vhe())
return;
__sysreg_save_el1_state(guest_ctxt);
__sysreg_save_user_state(guest_ctxt);
- __sysreg32_save_state(vcpu);
/* Restore host user state */
__sysreg_restore_user_state(host_ctxt);
For now, I'll stash this as a separate patch as it will improve
readability and make it easier to bisect things.
Thanks,
-Christoffer
next prev parent reply other threads:[~2017-12-15 16:29 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-07 17:05 [PATCH v2 00/36] Optimize KVM/ARM for VHE systems Christoffer Dall
2017-12-07 17:05 ` [PATCH v2 01/36] KVM: arm64: Avoid storing the vcpu pointer on the stack Christoffer Dall
2017-12-09 17:19 ` Marc Zyngier
2017-12-11 9:30 ` Christoffer Dall
2017-12-11 9:35 ` Marc Zyngier
2017-12-07 17:05 ` [PATCH v2 02/36] KVM: arm64: Rework hyp_panic for VHE and non-VHE Christoffer Dall
2017-12-09 17:24 ` Marc Zyngier
2017-12-07 17:05 ` [PATCH v2 03/36] KVM: arm64: Move HCR_INT_OVERRIDE to default HCR_EL2 guest flag Christoffer Dall
2017-12-07 17:05 ` [PATCH v2 04/36] KVM: arm/arm64: Get rid of vcpu->arch.irq_lines Christoffer Dall
2017-12-07 17:05 ` [PATCH v2 05/36] KVM: arm/arm64: Add kvm_vcpu_load_sysregs and kvm_vcpu_put_sysregs Christoffer Dall
2017-12-09 17:30 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 06/36] KVM: arm64: Defer restoring host VFP state to vcpu_put Christoffer Dall
2017-12-09 17:37 ` Marc Zyngier
2017-12-11 9:31 ` Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 07/36] KVM: arm64: Move debug dirty flag calculation out of world switch Christoffer Dall
2017-12-09 19:20 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 08/36] KVM: arm64: Slightly improve debug save/restore functions Christoffer Dall
2017-12-09 19:37 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 09/36] KVM: arm64: Improve debug register save/restore flow Christoffer Dall
2017-12-11 9:40 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 10/36] KVM: arm64: Factor out fault info population and gic workarounds Christoffer Dall
2017-12-11 9:45 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 11/36] KVM: arm64: Introduce VHE-specific kvm_vcpu_run Christoffer Dall
2017-12-11 9:53 ` Marc Zyngier
2017-12-14 12:12 ` Christoffer Dall
2017-12-14 12:17 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 12/36] KVM: arm64: Remove kern_hyp_va() use in VHE switch function Christoffer Dall
2017-12-11 9:54 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 13/36] KVM: arm64: Don't deactivate VM on VHE systems Christoffer Dall
2017-12-11 9:58 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 14/36] KVM: arm64: Remove noop calls to timer save/restore from VHE switch Christoffer Dall
2017-12-11 10:02 ` Marc Zyngier
2017-12-14 12:30 ` Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 15/36] KVM: arm64: Move userspace system registers into separate function Christoffer Dall
2017-12-11 10:14 ` Marc Zyngier
2017-12-14 12:53 ` Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 16/36] KVM: arm64: Rewrite sysreg alternatives to static keys Christoffer Dall
2017-12-11 10:15 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 17/36] KVM: arm64: Introduce separate VHE/non-VHE sysreg save/restore functions Christoffer Dall
2017-12-11 10:22 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 18/36] KVM: arm/arm64: Remove leftover comment from kvm_vcpu_run_vhe Christoffer Dall
2017-12-11 10:30 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 19/36] KVM: arm64: Unify non-VHE host/guest sysreg save and restore functions Christoffer Dall
2017-12-11 10:40 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 20/36] KVM: arm64: Don't save the host ELR_EL2 and SPSR_EL2 on VHE systems Christoffer Dall
2017-12-11 10:44 ` Marc Zyngier
2017-12-14 13:46 ` Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 21/36] KVM: arm64: Change 32-bit handling of VM system registers Christoffer Dall
2017-12-11 10:57 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 22/36] KVM: arm64: Prepare to handle traps on deferred VM sysregs Christoffer Dall
2017-12-11 11:10 ` Marc Zyngier
2017-12-11 11:24 ` Christoffer Dall
2017-12-11 11:46 ` Marc Zyngier
2017-12-12 13:08 ` Marc Zyngier
2017-12-12 15:46 ` Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 23/36] KVM: arm64: Prepare to handle traps on deferred EL0 sysregs Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 24/36] KVM: arm64: Prepare to handle traps on remaining deferred EL1 sysregs Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 25/36] KVM: arm64: Prepare to handle traps on deferred AArch32 sysregs Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 26/36] KVM: arm64: Defer saving/restoring system registers to vcpu load/put on VHE Christoffer Dall
2017-12-11 13:20 ` Marc Zyngier
2017-12-15 16:29 ` Christoffer Dall [this message]
2017-12-29 16:39 ` Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 27/36] KVM: arm64: Move common VHE/non-VHE trap config in separate functions Christoffer Dall
2017-12-11 13:53 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 28/36] KVM: arm64: Configure FPSIMD traps on vcpu load/put for VHE Christoffer Dall
2017-12-11 14:18 ` Marc Zyngier
2017-12-07 17:06 ` [PATCH v2 29/36] KVM: arm64: Configure c15, PMU, and debug register traps on cpu " Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 30/36] KVM: arm64: Separate activate_traps and deactive_traps for VHE and non-VHE Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 31/36] KVM: arm/arm64: Get rid of vgic_elrsr Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 32/36] KVM: arm/arm64: Handle VGICv2 save/restore from the main VGIC code Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 33/36] KVM: arm/arm64: Move arm64-only vgic-v2-sr.c file to arm64 Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 34/36] KVM: arm/arm64: Handle VGICv3 save/restore from the main VGIC code on VHE Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 35/36] KVM: arm/arm64: Move VGIC APR save/restore to vgic put/load Christoffer Dall
2017-12-07 17:06 ` [PATCH v2 36/36] KVM: arm/arm64: Avoid VGICv3 save/restore on VHE with no IRQs Christoffer Dall
2017-12-11 14:43 ` [PATCH v2 00/36] Optimize KVM/ARM for VHE systems Yury Norov
2017-12-11 14:56 ` Marc Zyngier
2017-12-11 15:14 ` Yury Norov
2017-12-11 15:34 ` Christoffer Dall
2017-12-11 16:30 ` Yury Norov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171215162929.GC910@cbox \
--to=christoffer.dall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).