From: embed3d@gmail.com (Philipp Rossak)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC 4/5] ARM: dts: sun8i: a83t: Add support for the ir interface
Date: Sat, 16 Dec 2017 03:49:13 +0100 [thread overview]
Message-ID: <20171216024914.7550-5-embed3d@gmail.com> (raw)
In-Reply-To: <20171216024914.7550-1-embed3d@gmail.com>
The ir interface is like the H3 at 0x01f02000 located and is exactly
the same. This patch adds support for the ir interface on the A83T.
Signed-off-by: Philipp Rossak <embed3d@gmail.com>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 5edb645b506f..5dbf2f0891c1 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -470,6 +470,16 @@
#reset-cells = <1>;
};
+ ir: ir at 01f02000 {
+ compatible = "allwinner,sun5i-a13-ir";
+ clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+ clock-names = "apb", "ir";
+ resets = <&r_ccu RST_APB0_IR>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x01f02000 0x40>;
+ status = "disabled";
+ };
+
r_pio: pinctrl at 1f02c00 {
compatible = "allwinner,sun8i-a83t-r-pinctrl";
reg = <0x01f02c00 0x400>;
--
2.11.0
next prev parent reply other threads:[~2017-12-16 2:49 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-16 2:49 [RFC 0/5] IR support for A83T - sunxi-ir driver update Philipp Rossak
2017-12-16 2:49 ` [RFC 1/5] [media] rc: update sunxi-ir driver to get base frequency from devicetree Philipp Rossak
2017-12-16 9:18 ` Mauro Carvalho Chehab
2017-12-16 17:30 ` Philipp Rossak
2017-12-16 2:49 ` [RFC 2/5] [media] dt: bindings: Update binding documentation for sunxi IR controller Philipp Rossak
2017-12-16 18:36 ` Rob Herring
2017-12-16 2:49 ` [RFC 3/5] ARM: dts: sun8i: a83t: Add the ir pin for the A83T Philipp Rossak
2017-12-16 2:49 ` Philipp Rossak [this message]
2017-12-16 2:49 ` [RFC 5/5] ARM: dts: sun8i: a83t: bananapi-m3: Enable IR controller Philipp Rossak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171216024914.7550-5-embed3d@gmail.com \
--to=embed3d@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).