From mboxrd@z Thu Jan 1 00:00:00 1970 From: w@1wt.eu (Willy Tarreau) Date: Mon, 18 Dec 2017 07:37:15 +0100 Subject: pxa3xx_nand times out in 4.14 with JFFS2 In-Reply-To: <20171217224617.1f9b8b84@xps13> References: <20171217155305.16c5bb4f@bbrezillon> <20171217150043.GA1403@1wt.eu> <20171217162342.GA1833@1wt.eu> <20171217190746.2a61232c@bbrezillon> <20171217190056.GA1107@1wt.eu> <20171217211650.GA6815@1wt.eu> <20171217222611.59f9031b@bbrezillon> <20171217224617.1f9b8b84@xps13> Message-ID: <20171218063715.GA20461@1wt.eu> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi guys, On Sun, Dec 17, 2017 at 10:46:17PM +0100, Miquel RAYNAL wrote: > > Actually, if things go well it will only be applied to stable > > releases (I really hope we'll be able to switch to Miquel's driver in > > 4.16). BTW, if you have some time, maybe you can test Miquel's [1] > > branch and let us know if it still works properly. > > As Boris said, we would really welcome a test of this branch, because > you almost have the same setup as Sean in the thread "pxa3xx: wait time > out when scanning for bb" and I am running out of explanation for his > problem unless it is related to U-Boot. So if you could try booting > with and without the on-flash-bbt property and report whether it fails > or not it would be of great help! Yes, I noticed your work mentionned in some of the threads I've read during my troubleshooting session and considered giving it a try. I'll probably do this next week-end. Thanks! Willy