From: jbrunet@baylibre.com (Jerome Brunet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next v3 6/7] net: phy: meson-gxl: add interrupt support
Date: Mon, 18 Dec 2017 10:44:45 +0100 [thread overview]
Message-ID: <20171218094446.31912-7-jbrunet@baylibre.com> (raw)
In-Reply-To: <20171218094446.31912-1-jbrunet@baylibre.com>
Enable interrupt support in meson-gxl PHY driver
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/net/phy/meson-gxl.c | 37 ++++++++++++++++++++++++++++++++++++-
1 file changed, 36 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
index ddc92424e8de..ee0aa18af631 100644
--- a/drivers/net/phy/meson-gxl.c
+++ b/drivers/net/phy/meson-gxl.c
@@ -33,6 +33,14 @@
#define TSTCNTL_WRITE_ADDRESS GENMASK(4, 0)
#define TSTREAD1 21
#define TSTWRITE 23
+#define INTSRC_FLAG 29
+#define INTSRC_ANEG_PR BIT(1)
+#define INTSRC_PARALLEL_FAULT BIT(2)
+#define INTSRC_ANEG_LP_ACK BIT(3)
+#define INTSRC_LINK_DOWN BIT(4)
+#define INTSRC_REMOTE_FAULT BIT(5)
+#define INTSRC_ANEG_COMPLETE BIT(6)
+#define INTSRC_MASK 30
#define BANK_ANALOG_DSP 0
#define BANK_WOL 1
@@ -193,16 +201,43 @@ static int meson_gxl_read_status(struct phy_device *phydev)
return genphy_read_status(phydev);
}
+static int meson_gxl_ack_interrupt(struct phy_device *phydev)
+{
+ int ret = phy_read(phydev, INTSRC_FLAG);
+
+ return ret < 0 ? ret : 0;
+}
+
+static int meson_gxl_config_intr(struct phy_device *phydev)
+{
+ u16 val;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ val = INTSRC_ANEG_PR
+ | INTSRC_PARALLEL_FAULT
+ | INTSRC_ANEG_LP_ACK
+ | INTSRC_LINK_DOWN
+ | INTSRC_REMOTE_FAULT
+ | INTSRC_ANEG_COMPLETE;
+ } else {
+ val = 0;
+ }
+
+ return phy_write(phydev, INTSRC_MASK, val);
+}
+
static struct phy_driver meson_gxl_phy[] = {
{
.phy_id = 0x01814400,
.phy_id_mask = 0xfffffff0,
.name = "Meson GXL Internal PHY",
.features = PHY_BASIC_FEATURES,
- .flags = PHY_IS_INTERNAL,
+ .flags = PHY_IS_INTERNAL | PHY_HAS_INTERRUPT,
.config_init = meson_gxl_config_init,
.aneg_done = genphy_aneg_done,
.read_status = meson_gxl_read_status,
+ .ack_interrupt = meson_gxl_ack_interrupt,
+ .config_intr = meson_gxl_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
},
--
2.14.3
next prev parent reply other threads:[~2017-12-18 9:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-18 9:44 [PATCH net-next v3 0/7] net: phy: meson-gxl: clean-up and improvements Jerome Brunet
2017-12-18 9:44 ` [PATCH net-next v3 1/7] net: phy: meson-gxl: check phy_write return value Jerome Brunet
2017-12-18 9:44 ` [PATCH net-next v3 2/7] net: phy: meson-gxl: define control registers Jerome Brunet
2017-12-18 9:44 ` [PATCH net-next v3 3/7] net: phy: meson-gxl: add read and write helpers for banked registers Jerome Brunet
2017-12-18 9:44 ` [PATCH net-next v3 4/7] net: phy: meson-gxl: use genphy_config_init Jerome Brunet
2017-12-18 9:44 ` [PATCH net-next v3 5/7] net: phy: meson-gxl: leave CONFIG_A6 untouched Jerome Brunet
2017-12-18 9:44 ` Jerome Brunet [this message]
2017-12-18 9:44 ` [PATCH net-next v3 7/7] net: phy: meson-gxl: join the authors Jerome Brunet
2017-12-18 18:25 ` [PATCH net-next v3 0/7] net: phy: meson-gxl: clean-up and improvements David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171218094446.31912-7-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox