linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: steve.capper@arm.com (Steve Capper)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 5/7] arm64: dump: Make kernel page table dumper dynamic again
Date: Mon, 18 Dec 2017 21:47:34 +0000	[thread overview]
Message-ID: <20171218214736.13761-6-steve.capper@arm.com> (raw)
In-Reply-To: <20171218214736.13761-1-steve.capper@arm.com>

The kernel page table dumper assumes that the placement of VA regions is
constant and determined at compile time. As we are about to introduce
variable VA logic, we need to be able to determine certain regions at
boot time.

This patch adds logic to the kernel page table dumper s.t. these regions
can be computed at boot time.

Signed-off-by: Steve Capper <steve.capper@arm.com>
---
 arch/arm64/mm/dump.c | 58 ++++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 47 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/mm/dump.c b/arch/arm64/mm/dump.c
index d1814b247d4b..4a3e71046cb2 100644
--- a/arch/arm64/mm/dump.c
+++ b/arch/arm64/mm/dump.c
@@ -29,23 +29,45 @@
 #include <asm/pgtable-hwdef.h>
 #include <asm/ptdump.h>
 
-static const struct addr_marker address_markers[] = {
-	{ PAGE_OFFSET,			"Linear Mapping start" },
-	{ VA_START,			"Linear Mapping end" },
+
+enum address_markers_idx {
+	PAGE_OFFSET_NR = 0,
+	VA_START_NR,
+#ifdef CONFIG_KASAN
+	KASAN_START_NR,
+	KASAN_END_NR,
+#endif
+	MODULES_START_NR,
+	MODULES_END_NR,
+	VMALLOC_START_NR,
+	VMALLOC_END_NR,
+	FIXADDR_START_NR,
+	FIXADDR_END_NR,
+	PCI_START_NR,
+	PCI_END_NR,
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+	VMEMMAP_START_NR,
+#endif
+	END_NR
+};
+
+static struct addr_marker address_markers[] = {
+	{ 0 /* PAGE_OFFSET */,		"Linear Mapping start" },
+	{ 0 /* VA_START */,		"Linear Mapping end" },
 #ifdef CONFIG_KASAN
-	{ KASAN_SHADOW_START,		"Kasan shadow start" },
+	{ 0 /* KASAN_SHADOW_START */,	"Kasan shadow start" },
 	{ KASAN_SHADOW_END,		"Kasan shadow end" },
 #endif
 	{ MODULES_VADDR,		"Modules start" },
 	{ MODULES_END,			"Modules end" },
 	{ VMALLOC_START,		"vmalloc() Area" },
-	{ VMALLOC_END,			"vmalloc() End" },
-	{ FIXADDR_START,		"Fixmap start" },
-	{ FIXADDR_TOP,			"Fixmap end" },
-	{ PCI_IO_START,			"PCI I/O start" },
-	{ PCI_IO_END,			"PCI I/O end" },
+	{ 0 /* VMALLOC_END */,		"vmalloc() End" },
+	{ 0 /* FIXADDR_START */,	"Fixmap start" },
+	{ 0 /* FIXADDR_TOP */,		"Fixmap end" },
+	{ 0 /* PCI_IO_START */,		"PCI I/O start" },
+	{ 0 /* PCI_IO_END */,		"PCI I/O end" },
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
-	{ VMEMMAP_START,		"vmemmap" },
+	{ 0 /* VMEMMAP_START */,	"vmemmap" },
 #endif
 	{ -1,				NULL },
 };
@@ -375,7 +397,6 @@ static void ptdump_initialize(void)
 static struct ptdump_info kernel_ptdump_info = {
 	.mm		= &init_mm,
 	.markers	= address_markers,
-	.base_addr	= PAGE_OFFSET,
 };
 
 void ptdump_check_wx(void)
@@ -401,6 +422,21 @@ void ptdump_check_wx(void)
 static int ptdump_init(void)
 {
 	ptdump_initialize();
+	kernel_ptdump_info.base_addr = PAGE_OFFSET;
+	address_markers[PAGE_OFFSET_NR].start_address = PAGE_OFFSET;
+	address_markers[VA_START_NR].start_address = VA_START;
+#ifdef CONFIG_KASAN
+	address_markers[KASAN_START_NR].start_address = KASAN_SHADOW_START;
+#endif
+	address_markers[VMALLOC_END_NR].start_address = VMALLOC_END;
+	address_markers[FIXADDR_START_NR].start_address = FIXADDR_START;
+	address_markers[FIXADDR_END_NR].start_address = FIXADDR_TOP;
+	address_markers[PCI_START_NR].start_address = PCI_IO_START;
+	address_markers[PCI_END_NR].start_address = PCI_IO_END;
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+	address_markers[VMEMMAP_START_NR].start_address = VMEMMAP_START;
+#endif
+
 	return ptdump_debugfs_register(&kernel_ptdump_info,
 					"kernel_page_tables");
 }
-- 
2.11.0

  parent reply	other threads:[~2017-12-18 21:47 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-18 21:47 [PATCH V2 0/7] 52-bit kernel VAs for arm64 Steve Capper
2017-12-18 21:47 ` [PATCH V2 1/7] arm/arm64: KVM: Formalise end of direct linear map Steve Capper
2017-12-18 21:47 ` [PATCH V2 2/7] arm64: mm: Flip kernel VA space Steve Capper
2018-01-02  8:57   ` Steve Capper
2017-12-18 21:47 ` [PATCH V2 3/7] arm64: kasan: Switch to using KASAN_SHADOW_OFFSET Steve Capper
2017-12-18 21:47 ` [PATCH V2 4/7] arm64: mm: Replace fixed map BUILD_BUG_ON's with BUG_ON's Steve Capper
2017-12-18 21:47 ` Steve Capper [this message]
2017-12-18 21:47 ` [PATCH V2 6/7] arm64: mm: Make VA_BITS variable, introduce VA_BITS_MIN Steve Capper
2017-12-18 21:47 ` [PATCH V2 7/7] arm64: mm: Add 48/52-bit kernel VA support Steve Capper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171218214736.13761-6-steve.capper@arm.com \
    --to=steve.capper@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).