From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Tue, 19 Dec 2017 09:16:11 +0000 Subject: [PATCH v6] atmel_flexcom: Support resuming after a chip reset In-Reply-To: <5aff8591-f7d9-7f6d-bf3b-063014ce4bd5@microchip.com> References: <20171212162119.32138-1-romain.izard.pro@gmail.com> <20171218201907.GU7022@piout.net> <5aff8591-f7d9-7f6d-bf3b-063014ce4bd5@microchip.com> Message-ID: <20171219091611.7naco4ac4g2km5wj@dell> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, 19 Dec 2017, Nicolas Ferre wrote: > On 18/12/2017 at 21:19, Alexandre Belloni wrote: > > On 12/12/2017 at 17:21:19 +0100, Romain Izard wrote: > >> The controller used by a flexcom module is configured at boot, and left > >> alone after this. In the suspend mode called "backup with self-refresh" > >> available on SAMA5D2, the chip will resume with most of its registers > >> reset. In this case, we need to restore the state of the flexcom driver > >> on resume. > >> > >> Signed-off-by: Romain Izard > > > > Seems good to me > > > > Acked-by: Alexandre Belloni > > Thanks Romain, of course I can add the tags that I gave you already: > > Acked-by: Nicolas Ferre > Tested-by: Nicolas Ferre > > Lee, > It seems that you already gave your tag for the v5 of this patch. The > wording is even better with this patch. So, can you take this patch in > your tree? Done. :) -- Lee Jones Linaro Services Technical Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog