From mboxrd@z Thu Jan 1 00:00:00 1970 From: alexandre.belloni@free-electrons.com (Alexandre Belloni) Date: Tue, 19 Dec 2017 22:31:39 +0100 Subject: [PATCH 15/45] ARM: dts: at91: at91sam9261ek: use TCB0 as timers In-Reply-To: <20171219213209.13823-1-alexandre.belloni@free-electrons.com> References: <20171219213209.13823-1-alexandre.belloni@free-electrons.com> Message-ID: <20171219213209.13823-16-alexandre.belloni@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Use tcb0 for timers as selected in at91_dt_defconfig. Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91sam9261ek.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 960d6940ebf6..35db7f48229a 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -15,6 +15,14 @@ chosen { bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw"; stdout-path = "serial0:115200n8"; + + clocksource { + timer = <&timer0>; + }; + + clockevent { + timer = <&timer1>; + }; }; memory { @@ -125,6 +133,18 @@ }; apb { + tcb0: timer at fffa0000 { + timer0: timer at 0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer1: timer at 2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + usb1: gadget at fffa4000 { atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>; status = "okay"; -- 2.15.1