[PATCH 1/3] ARM: dts: am335x-boneblue: fix wl1835 IRQ pin

[PATCH 1/3] ARM: dts: am335x-boneblue: fix wl1835 IRQ pin

[Robert Nelson]

Use the correct IRQ gpio pin on the BeagleBone Blue to allow the
wl1835 wireless module to actually work.

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
CC: Jason Kridner <jkridner@beagleboard.org>
CC: Drew Fustini <drew@beagleboard.org>
CC: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/am335x-boneblue.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index d5be9fc4f416..c5820919e709 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -216,7 +216,7 @@
 	wl18xx_pins: pinmux_wl18xx_pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* (K18) gmii1_txclk.gpio3[9] - WL_EN */
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* (H18) rmii1_refclk.gpio0[29] - WL_IRQ */
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */
 			AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */
 		>;
 	};
@@ -414,7 +414,7 @@
 		compatible = "ti,wl1835";
 		reg = <2>;
 		interrupt-parent = <&gpio0>;
-		interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
 	};
 };
 
-- 
2.15.1

[PATCH 2/3] ARM: dts: am335x-boneblue: enable usarts

[Robert Nelson]

BeagleBone Blue: usarts: enable all the dedicated usart connectors.

DSM2/uart4: on the Blue, this is a recieve only interface.

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
CC: Jason Kridner <jkridner@beagleboard.org>
CC: Drew Fustini <drew@beagleboard.org>
CC: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/am335x-boneblue.dts | 60 +++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index c5820919e709..ad988e8b8427 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -159,6 +159,7 @@
 		>;
 	};
 
+	/* UT0 */
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* (E15) uart0_rxd.uart0_rxd */
@@ -166,6 +167,37 @@
 		>;
 	};
 
+	/* UT1 */
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* (D16) uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* (D15) uart1_txd.uart1_txd */
+		>;
+	};
+
+	/* GPS */
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE1)	/* (A17) spi0_sclk.uart2_rxd */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* (B17) spi0_d0.uart2_txd */
+		>;
+	};
+
+	/* DSM2 */
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)	/* (T17) gpmc_wait0.uart4_rxd */
+		>;
+	};
+
+	/* UT5 */
+	uart5_pins: pinmux_uart5_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8C4, PIN_INPUT_PULLUP | MUX_MODE4)	/* (U2) lcd_data9.uart5_rxd */
+			AM33XX_IOPAD(0x8C0, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* (U1) lcd_data8.uart5_txd */
+		>;
+	};
+
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)		/* (C15) spi0_cs1.gpio0[6] */
@@ -229,6 +261,34 @@
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins>;
+
+	status = "okay";
+};
+
 &usb {
 	status = "okay";
 };
-- 
2.15.1

[PATCH 3/3] ARM: dts: am335x-boneblue: enable can

[Robert Nelson]

BeagleBone Blue: can: enable the dedicated can connector.

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
CC: Jason Kridner <jkridner@beagleboard.org>
CC: Drew Fustini <drew@beagleboard.org>
CC: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/am335x-boneblue.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index ad988e8b8427..3f2480d05a3b 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -252,6 +252,15 @@
 			AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */
 		>;
 	};
+
+	/* DCAN */
+	dcan1_pins: pinmux_dcan1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2)		/* (E17) uart0_rtsn.dcan1_rx */
+			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2)		/* (E18) uart0_ctsn.dcan1_tx */
+			AM33XX_IOPAD(0x940, PIN_OUTPUT | MUX_MODE7)		/* (M16) gmii1_rxd0.gpio2[21] */
+		>;
+	};
 };
 
 &uart0 {
@@ -510,6 +519,12 @@
 	clock-names = "ext-clk", "int-clk";
 };
 
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
 &gpio3 {
 	ls_buf_en {
 		gpio-hog;
-- 
2.15.1

[PATCH 1/3] ARM: dts: am335x-boneblue: fix wl1835 IRQ pin

[Tony Lindgren]

* Robert Nelson <robertcnelson@gmail.com> [171219 14:35]:
> Use the correct IRQ gpio pin on the BeagleBone Blue to allow the
> wl1835 wireless module to actually work.

Thanks applying all three into omap-for-v4.16/dt.

Tony