From mboxrd@z Thu Jan 1 00:00:00 1970 From: nicolas.ferre@microchip.com (Nicolas Ferre) Date: Wed, 20 Dec 2017 10:04:40 +0100 Subject: [PATCH] ARM: dts: at91: sama5d2_ptc_ek: use TCB0 as timers In-Reply-To: <20171219213209.13823-1-alexandre.belloni@free-electrons.com> References: <20171219213209.13823-1-alexandre.belloni@free-electrons.com> Message-ID: <20171220090440.18153-1-nicolas.ferre@microchip.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Use tcb0 for timers as selected in sama5_defconfig. Signed-off-by: Nicolas Ferre --- Hi Alex, Adding the newly added sama5d2_ptc_ek to the series. Not tested though. Regards, Nicolas arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index 186cb03e2672..e603a267bdf1 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -149,6 +149,18 @@ }; }; + tcb0: timer at f800c000 { + timer0: timer at 0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer at 1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; + uart0: serial at f801c000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0_default>; -- 2.9.0