* [PATCH v2 02/11] ARM: dts: imx6: Move nodes which have no reg property out of bus
2017-11-29 18:54 [PATCH v2 01/11] ARM: dts: imx53: Move nodes which have no reg property out of bus Fabio Estevam
@ 2017-11-29 18:54 ` Fabio Estevam
2017-11-29 18:54 ` [PATCH v2 03/11] ARM: dts: imx6: Add unit address and reg for the anatop nodes Fabio Estevam
` (9 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: Fabio Estevam @ 2017-11-29 18:54 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@nxp.com>
Move tempmon, ldb and pmu nodes from soc node to root node.
The nodes that have been moved do not have any register properties and thus
shouldn't be placed on the bus.
This fixes the following build warnings with W=1:
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 2000000/tempmon missing or empty reg/ranges property
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 2000000/ldb missing or empty reg/ranges property
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/pmu missing or empty reg/ranges property
Based on a patch from Simon Horman for r8a7795.dtsi.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
Changes since v1:
- None
arch/arm/boot/dts/imx6qdl.dtsi | 136 +++++++++++++++++++++--------------------
arch/arm/boot/dts/imx6sl.dtsi | 28 +++++----
arch/arm/boot/dts/imx6sx.dtsi | 30 ++++-----
arch/arm/boot/dts/imx6ul.dtsi | 32 +++++-----
4 files changed, 117 insertions(+), 109 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index ac4f9ec..a0f6712 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -80,6 +80,75 @@
};
};
+ tempmon: tempmon {
+ compatible = "fsl,imx6q-tempmon";
+ interrupt-parent = <&gpc>;
+ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ fsl,tempmon-data = <&ocotp>;
+ clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+ };
+
+ ldb: ldb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
+ gpr = <&gpr>;
+ status = "disabled";
+
+ lvds-channel at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ status = "disabled";
+
+ port at 0 {
+ reg = <0>;
+
+ lvds0_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_lvds0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ lvds0_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_lvds0>;
+ };
+ };
+ };
+
+ lvds-channel at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ status = "disabled";
+
+ port at 0 {
+ reg = <0>;
+
+ lvds1_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_lvds1>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ lvds1_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_lvds1>;
+ };
+ };
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&gpc>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -224,11 +293,6 @@
status = "disabled";
};
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
- };
-
aips-bus at 2000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
@@ -729,14 +793,6 @@
};
};
- tempmon: tempmon {
- compatible = "fsl,imx6q-tempmon";
- interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon = <&anatop>;
- fsl,tempmon-data = <&ocotp>;
- clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
- };
-
usbphy1: usbphy at 20c9000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
@@ -841,60 +897,6 @@
reg = <0x20e0000 0x4000>;
};
- ldb: ldb {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
- gpr = <&gpr>;
- status = "disabled";
-
- lvds-channel at 0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- status = "disabled";
-
- port at 0 {
- reg = <0>;
-
- lvds0_mux_0: endpoint {
- remote-endpoint = <&ipu1_di0_lvds0>;
- };
- };
-
- port at 1 {
- reg = <1>;
-
- lvds0_mux_1: endpoint {
- remote-endpoint = <&ipu1_di1_lvds0>;
- };
- };
- };
-
- lvds-channel at 1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- status = "disabled";
-
- port at 0 {
- reg = <0>;
-
- lvds1_mux_0: endpoint {
- remote-endpoint = <&ipu1_di0_lvds1>;
- };
- };
-
- port at 1 {
- reg = <1>;
-
- lvds1_mux_1: endpoint {
- remote-endpoint = <&ipu1_di1_lvds1>;
- };
- };
- };
- };
-
dcic1: dcic at 20e4000 {
reg = <0x020e4000 0x4000>;
interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 3ea1a41..3365182 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -102,6 +102,21 @@
};
};
+ tempmon: tempmon {
+ compatible = "fsl,imx6q-tempmon";
+ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gpc>;
+ fsl,tempmon = <&anatop>;
+ fsl,tempmon-data = <&ocotp>;
+ clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&gpc>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -125,11 +140,6 @@
arm,data-latency = <4 2 3>;
};
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
- };
-
aips1: aips-bus at 2000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
@@ -615,14 +625,6 @@
};
};
- tempmon: tempmon {
- compatible = "fsl,imx6q-tempmon";
- interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon = <&anatop>;
- fsl,tempmon-data = <&ocotp>;
- clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
- };
-
usbphy1: usbphy at 20c9000 {
compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 40c6738c..4500380 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -141,6 +141,22 @@
};
};
+ tempmon: tempmon {
+ compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+ interrupt-parent = <&gpc>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&gpc>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -148,11 +164,6 @@
interrupt-parent = <&gpc>;
ranges;
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- };
-
ocram: sram at 900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
@@ -671,15 +682,6 @@
};
};
- tempmon: tempmon {
- compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon = <&anatop>;
- nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
- nvmem-cell-names = "calib", "temp_grade";
- clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
- };
-
usbphy1: usbphy at 20c9000 {
compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index e0b4a46..0e931fd 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -136,6 +136,23 @@
clock-output-names = "ipp_di1";
};
+ tempmon: tempmon {
+ compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
+ interrupt-parent = <&gpc>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupt-parent = <&gpc>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -143,12 +160,6 @@
interrupt-parent = <&gpc>;
ranges;
- pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
ocram: sram at 900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
@@ -599,15 +610,6 @@
fsl,anatop = <&anatop>;
};
- tempmon: tempmon {
- compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon = <&anatop>;
- nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
- nvmem-cell-names = "calib", "temp_grade";
- clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
- };
-
snvs: snvs at 20cc000 {
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
reg = <0x020cc000 0x4000>;
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 03/11] ARM: dts: imx6: Add unit address and reg for the anatop nodes
2017-11-29 18:54 [PATCH v2 01/11] ARM: dts: imx53: Move nodes which have no reg property out of bus Fabio Estevam
2017-11-29 18:54 ` [PATCH v2 02/11] ARM: dts: imx6: " Fabio Estevam
@ 2017-11-29 18:54 ` Fabio Estevam
2017-11-29 18:54 ` [PATCH v2 04/11] ARM: dts: imx6dl: Pass the reg properties for mipi nodes Fabio Estevam
` (8 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: Fabio Estevam @ 2017-11-29 18:54 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@nxp.com>
Add unit address and reg for the anatop nodes in order to fix the
following build warnings with W=1:
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 2000000/anatop at 20c8000/regulator-1p1 missing or empty reg/ranges property
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 2000000/anatop at 20c8000/regulator-3p0 missing or empty reg/ranges property
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 2000000/anatop at 20c8000/regulator-2p5 missing or empty reg/ranges property
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 2000000/anatop at 20c8000/regulator-vddcore missing or empty reg/ranges property
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 2000000/anatop at 20c8000/regulator-vddpu missing or empty reg/ranges property
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 2000000/anatop at 20c8000/regulator-vddsoc missing or empty reg/ranges property
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
Changes since v1:
- None
arch/arm/boot/dts/imx6qdl.dtsi | 20 ++++++++++++++------
arch/arm/boot/dts/imx6sl.dtsi | 20 ++++++++++++++------
arch/arm/boot/dts/imx6sx.dtsi | 20 ++++++++++++++------
arch/arm/boot/dts/imx6ul.dtsi | 11 ++++++++---
4 files changed, 50 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index a0f6712..7edd209 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -695,8 +695,11 @@
interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
<0 54 IRQ_TYPE_LEVEL_HIGH>,
<0 127 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- regulator-1p1 {
+ regulator-1p1 at 20c8110 {
+ reg = <0x20c8110>;
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <1000000>;
@@ -711,7 +714,8 @@
anatop-enable-bit = <0>;
};
- regulator-3p0 {
+ regulator-3p0 at 20c8120 {
+ reg = <0x20c8120>;
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
@@ -726,7 +730,8 @@
anatop-enable-bit = <0>;
};
- regulator-2p5 {
+ regulator-2p5 at 20c8130 {
+ reg = <0x20c8130>;
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2250000>;
@@ -741,7 +746,8 @@
anatop-enable-bit = <0>;
};
- reg_arm: regulator-vddcore {
+ reg_arm: regulator-vddcore at 20c8140 {
+ reg = <0x20c8140>;
compatible = "fsl,anatop-regulator";
regulator-name = "vddarm";
regulator-min-microvolt = <725000>;
@@ -758,7 +764,8 @@
anatop-max-voltage = <1450000>;
};
- reg_pu: regulator-vddpu {
+ reg_pu: regulator-vddpu at 20c8140 {
+ reg = <0x20c8140>;
compatible = "fsl,anatop-regulator";
regulator-name = "vddpu";
regulator-min-microvolt = <725000>;
@@ -775,7 +782,8 @@
anatop-max-voltage = <1450000>;
};
- reg_soc: regulator-vddsoc {
+ reg_soc: regulator-vddsoc at 20c8140 {
+ reg = <0x20c8140>;
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 3365182..ae8df3c 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -527,8 +527,11 @@
interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
<0 54 IRQ_TYPE_LEVEL_HIGH>,
<0 127 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- regulator-1p1 {
+ regulator-1p1 at 20c8110 {
+ reg = <0x20c8110>;
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <800000>;
@@ -543,7 +546,8 @@
anatop-enable-bit = <0>;
};
- regulator-3p0 {
+ regulator-3p0 at 20c8120 {
+ reg = <0x20c8120>;
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
@@ -558,7 +562,8 @@
anatop-enable-bit = <0>;
};
- regulator-2p5 {
+ regulator-2p5 at 20c8130 {
+ reg = <0x20c8130>;
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2100000>;
@@ -573,7 +578,8 @@
anatop-enable-bit = <0>;
};
- reg_arm: regulator-vddcore {
+ reg_arm: regulator-vddcore at 20c8140 {
+ reg = <0x20c8140>;
compatible = "fsl,anatop-regulator";
regulator-name = "vddarm";
regulator-min-microvolt = <725000>;
@@ -590,7 +596,8 @@
anatop-max-voltage = <1450000>;
};
- reg_pu: regulator-vddpu {
+ reg_pu: regulator-vddpu at 20c8140 {
+ reg = <0x20c8140>;
compatible = "fsl,anatop-regulator";
regulator-name = "vddpu";
regulator-min-microvolt = <725000>;
@@ -607,7 +614,8 @@
anatop-max-voltage = <1450000>;
};
- reg_soc: regulator-vddsoc {
+ reg_soc: regulator-vddsoc at 20c8140 {
+ reg = <0x20c8140>;
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 4500380..07ba518 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -585,8 +585,11 @@
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- regulator-1p1 {
+ regulator-1p1 at 20c8110 {
+ reg = <0x20c8110>;
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <800000>;
@@ -601,7 +604,8 @@
anatop-enable-bit = <0>;
};
- regulator-3p0 {
+ regulator-3p0 at 20c8120 {
+ reg = <0x20c8120>;
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
@@ -616,7 +620,8 @@
anatop-enable-bit = <0>;
};
- regulator-2p5 {
+ regulator-2p5 at 20c8130 {
+ reg = <0x20c8130>;
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2100000>;
@@ -631,7 +636,8 @@
anatop-enable-bit = <0>;
};
- reg_arm: regulator-vddcore {
+ reg_arm: regulator-vddcore at 20c8140 {
+ reg = <0x20c8140>;
compatible = "fsl,anatop-regulator";
regulator-name = "vddarm";
regulator-min-microvolt = <725000>;
@@ -648,7 +654,8 @@
anatop-max-voltage = <1450000>;
};
- reg_pcie: regulator-vddpcie {
+ reg_pcie: regulator-vddpcie at 20c8140 {
+ reg = <0x20c8140>;
compatible = "fsl,anatop-regulator";
regulator-name = "vddpcie";
regulator-min-microvolt = <725000>;
@@ -664,7 +671,8 @@
anatop-max-voltage = <1450000>;
};
- reg_soc: regulator-vddsoc {
+ reg_soc: regulator-vddsoc at 20c8140 {
+ reg = <0x20c8140>;
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 0e931fd..3233f01 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -542,8 +542,11 @@
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p0: regulator-3p0 {
+ reg_3p0: regulator-3p0 at 20c8110 {
+ reg = <0x20c8110>;
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2625000>;
@@ -557,7 +560,8 @@
anatop-enable-bit = <0>;
};
- reg_arm: regulator-vddcore {
+ reg_arm: regulator-vddcore at 20c8140 {
+ reg = <0x20c8140>;
compatible = "fsl,anatop-regulator";
regulator-name = "cpu";
regulator-min-microvolt = <725000>;
@@ -574,7 +578,8 @@
anatop-max-voltage = <1450000>;
};
- reg_soc: regulator-vddsoc {
+ reg_soc: regulator-vddsoc at 20c8140 {
+ reg = <0x20c8140>;
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 04/11] ARM: dts: imx6dl: Pass the reg properties for mipi nodes
2017-11-29 18:54 [PATCH v2 01/11] ARM: dts: imx53: Move nodes which have no reg property out of bus Fabio Estevam
2017-11-29 18:54 ` [PATCH v2 02/11] ARM: dts: imx6: " Fabio Estevam
2017-11-29 18:54 ` [PATCH v2 03/11] ARM: dts: imx6: Add unit address and reg for the anatop nodes Fabio Estevam
@ 2017-11-29 18:54 ` Fabio Estevam
2017-12-01 13:05 ` Philipp Zabel
2017-11-29 18:54 ` [PATCH v2 05/11] ARM: dts: imx6dl: Remove unneeded label and unit address Fabio Estevam
` (7 subsequent siblings)
10 siblings, 1 reply; 14+ messages in thread
From: Fabio Estevam @ 2017-11-29 18:54 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@nxp.com>
Pass the reg properties for mipi nodes in order to fix the
following build warnings with W=1:
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2100000/mipi at 21dc000/port at 1/endpoint at 0 has a unit name, but no reg property
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2100000/mipi at 21dc000/port at 1/endpoint at 1 has a unit name, but no reg property
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2100000/mipi at 21dc000/port at 2/endpoint at 0 has a unit name, but no reg property
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2100000/mipi at 21dc000/port at 2/endpoint at 1 has a unit name, but no reg property
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2100000/mipi at 21dc000/port at 3/endpoint at 0 has a unit name, but no reg property
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2100000/mipi at 21dc000/port at 3/endpoint at 1 has a unit name, but no reg property
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2100000/mipi at 21dc000/port at 4/endpoint at 0 has a unit name, but no reg property
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2100000/mipi at 21dc000/port at 4/endpoint at 1 has a unit name, but no reg property
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
Changes since v1:
- None
arch/arm/boot/dts/imx6dl.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 4d693a7..d987661 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -309,10 +309,12 @@
#size-cells = <0>;
mipi_vc0_to_ipu1_csi0_mux: endpoint at 0 {
+ reg = <0>;
remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
};
mipi_vc0_to_ipu1_csi1_mux: endpoint at 1 {
+ reg = <1>;
remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>;
};
};
@@ -323,10 +325,12 @@
#size-cells = <0>;
mipi_vc1_to_ipu1_csi0_mux: endpoint at 0 {
+ reg = <0>;
remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc1>;
};
mipi_vc1_to_ipu1_csi1_mux: endpoint at 1 {
+ reg = <1>;
remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc1>;
};
};
@@ -337,10 +341,12 @@
#size-cells = <0>;
mipi_vc2_to_ipu1_csi0_mux: endpoint at 0 {
+ reg = <0>;
remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc2>;
};
mipi_vc2_to_ipu1_csi1_mux: endpoint at 1 {
+ reg = <1>;
remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc2>;
};
};
@@ -351,10 +357,12 @@
#size-cells = <0>;
mipi_vc3_to_ipu1_csi0_mux: endpoint at 0 {
+ reg = <0>;
remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc3>;
};
mipi_vc3_to_ipu1_csi1_mux: endpoint at 1 {
+ reg = <1>;
remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc3>;
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 04/11] ARM: dts: imx6dl: Pass the reg properties for mipi nodes
2017-11-29 18:54 ` [PATCH v2 04/11] ARM: dts: imx6dl: Pass the reg properties for mipi nodes Fabio Estevam
@ 2017-12-01 13:05 ` Philipp Zabel
0 siblings, 0 replies; 14+ messages in thread
From: Philipp Zabel @ 2017-12-01 13:05 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 2017-11-29 at 16:54 -0200, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
>
> Pass the reg properties for mipi nodes in order to fix the
> following build warnings with W=1:
>
> arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2100000/mipi at 21dc000/port at 1/endpoint at 0 has a unit name, but no reg property
> arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2100000/mipi at 21dc000/port at 1/endpoint at 1 has a unit name, but no reg property
> arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2100000/mipi at 21dc000/port at 2/endpoint at 0 has a unit name, but no reg property
> arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2100000/mipi at 21dc000/port at 2/endpoint at 1 has a unit name, but no reg property
> arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2100000/mipi at 21dc000/port at 3/endpoint at 0 has a unit name, but no reg property
> arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2100000/mipi at 21dc000/port at 3/endpoint at 1 has a unit name, but no reg property
> arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2100000/mipi at 21dc000/port at 4/endpoint at 0 has a unit name, but no reg property
> arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2100000/mipi at 21dc000/port at 4/endpoint at 1 has a unit name, but no reg property
>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
regards
Philipp
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 05/11] ARM: dts: imx6dl: Remove unneeded label and unit address
2017-11-29 18:54 [PATCH v2 01/11] ARM: dts: imx53: Move nodes which have no reg property out of bus Fabio Estevam
` (2 preceding siblings ...)
2017-11-29 18:54 ` [PATCH v2 04/11] ARM: dts: imx6dl: Pass the reg properties for mipi nodes Fabio Estevam
@ 2017-11-29 18:54 ` Fabio Estevam
2017-12-01 13:04 ` Philipp Zabel
2017-11-29 18:54 ` [PATCH v2 06/11] ARM: dts: imx7: Move nodes which have no reg property out of bus Fabio Estevam
` (6 subsequent siblings)
10 siblings, 1 reply; 14+ messages in thread
From: Fabio Estevam @ 2017-11-29 18:54 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@nxp.com>
Remove unneeded label and unit address in order to fix the following
build warnings with W=1:
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2000000/iomuxc-gpr at 20e0000/ipu1_csi0_mux at 34 has a unit name, but no reg property
arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2000000/iomuxc-gpr at 20e0000/ipu1_csi1_mux at 34 has a unit name, but no
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
Changes since v1:
- None
arch/arm/boot/dts/imx6dl.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index d987661..c01674f 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -170,7 +170,7 @@
};
&gpr {
- ipu1_csi0_mux: ipu1_csi0_mux at 34 {
+ ipu1_csi0_mux {
compatible = "video-mux";
mux-controls = <&mux 0>;
#address-cells = <1>;
@@ -224,7 +224,7 @@
};
};
- ipu1_csi1_mux: ipu1_csi1_mux at 34 {
+ ipu1_csi1_mux {
compatible = "video-mux";
mux-controls = <&mux 1>;
#address-cells = <1>;
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 05/11] ARM: dts: imx6dl: Remove unneeded label and unit address
2017-11-29 18:54 ` [PATCH v2 05/11] ARM: dts: imx6dl: Remove unneeded label and unit address Fabio Estevam
@ 2017-12-01 13:04 ` Philipp Zabel
0 siblings, 0 replies; 14+ messages in thread
From: Philipp Zabel @ 2017-12-01 13:04 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 2017-11-29 at 16:54 -0200, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
>
> Remove unneeded label and unit address in order to fix the following
> build warnings with W=1:
>
> arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2000000/iomuxc-gpr at 20e0000/ipu1_csi0_mux at 34 has a unit name, but no reg property
> arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus at 2000000/iomuxc-gpr at 20e0000/ipu1_csi1_mux at 34 has a unit name, but no
>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
regards
Philipp
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 06/11] ARM: dts: imx7: Move nodes which have no reg property out of bus
2017-11-29 18:54 [PATCH v2 01/11] ARM: dts: imx53: Move nodes which have no reg property out of bus Fabio Estevam
` (3 preceding siblings ...)
2017-11-29 18:54 ` [PATCH v2 05/11] ARM: dts: imx6dl: Remove unneeded label and unit address Fabio Estevam
@ 2017-11-29 18:54 ` Fabio Estevam
2017-11-29 18:54 ` [PATCH v2 07/11] ARM: dts: imx7d: Fix pcie node warnings Fabio Estevam
` (5 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: Fabio Estevam @ 2017-11-29 18:54 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@nxp.com>
Move usbphynop1, usbphynop2, usbhypnop3, replicator and timer and nodes
from soc node to root node.
The nodes that have been moved do not have any register properties and thus
shouldn't be placed on the bus.
This fixes the following build warnings with W=1:
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/replicator missing or empty reg/ranges property
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 30800000/usbphynop1 missing or empty reg/ranges property
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 30800000/usbphynop3 missing or empty reg/ranges property
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 30800000/usbphynop2 missing or empty reg/ranges property
Based on a patch from Simon Horman for r8a7795.dtsi.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
Changes since v1:
- None
arch/arm/boot/dts/imx7d.dtsi | 14 ++---
arch/arm/boot/dts/imx7s.dtsi | 120 +++++++++++++++++++++----------------------
2 files changed, 67 insertions(+), 67 deletions(-)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 7878257..9d92725 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -63,6 +63,13 @@
};
};
+ usbphynop2: usbphynop2 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_PHY2_CLK>;
+ clock-names = "main_clk";
+ #phy-cells = <0>;
+ };
+
soc {
etm at 3007d000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
@@ -105,13 +112,6 @@
reg = <0x30b20200 0x200>;
};
- usbphynop2: usbphynop2 {
- compatible = "usb-nop-xceiv";
- clocks = <&clks IMX7D_USB_PHY2_CLK>;
- clock-names = "main_clk";
- #phy-cells = <0>;
- };
-
fec2: ethernet at 30bf0000 {
compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
reg = <0x30bf0000 0x10000>;
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index e718fd2..81467ac 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -116,6 +116,66 @@
clock-output-names = "osc";
};
+ usbphynop1: usbphynop1 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_PHY1_CLK>;
+ clock-names = "main_clk";
+ #phy-cells = <0>;
+ };
+
+ usbphynop3: usbphynop3 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
+ clock-names = "main_clk";
+ #phy-cells = <0>;
+ };
+
+
+ replicator {
+ /*
+ * non-configurable replicators don't show up on the
+ * AMBA bus. As such no need to add "arm,primecell"
+ */
+ compatible = "arm,coresight-replicator";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* replicator output ports */
+ port at 0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&etr_in_port>;
+ };
+ };
+
+ /* replicator input port */
+ port at 2 {
+ reg = <0>;
+ replicator_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etf_out_port>;
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -260,43 +320,6 @@
};
};
- replicator {
- /*
- * non-configurable replicators don't show up on the
- * AMBA bus. As such no need to add "arm,primecell"
- */
- compatible = "arm,coresight-replicator";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* replicator output ports */
- port at 0 {
- reg = <0>;
- replicator_out_port0: endpoint {
- remote-endpoint = <&tpiu_in_port>;
- };
- };
-
- port at 1 {
- reg = <1>;
- replicator_out_port1: endpoint {
- remote-endpoint = <&etr_in_port>;
- };
- };
-
- /* replicator input port */
- port at 2 {
- reg = <0>;
- replicator_in_port0: endpoint {
- slave-mode;
- remote-endpoint = <&etf_out_port>;
- };
- };
- };
- };
-
intc: interrupt-controller at 31001000 {
compatible = "arm,cortex-a7-gic";
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
@@ -309,15 +332,6 @@
<0x31006000 0x2000>;
};
- timer {
- compatible = "arm,armv7-timer";
- interrupt-parent = <&intc>;
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
aips1: aips-bus at 30000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
@@ -945,20 +959,6 @@
reg = <0x30b30200 0x200>;
};
- usbphynop1: usbphynop1 {
- compatible = "usb-nop-xceiv";
- clocks = <&clks IMX7D_USB_PHY1_CLK>;
- clock-names = "main_clk";
- #phy-cells = <0>;
- };
-
- usbphynop3: usbphynop3 {
- compatible = "usb-nop-xceiv";
- clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
- clock-names = "main_clk";
- #phy-cells = <0>;
- };
-
usdhc1: usdhc at 30b40000 {
compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
reg = <0x30b40000 0x10000>;
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 07/11] ARM: dts: imx7d: Fix pcie node warnings
2017-11-29 18:54 [PATCH v2 01/11] ARM: dts: imx53: Move nodes which have no reg property out of bus Fabio Estevam
` (4 preceding siblings ...)
2017-11-29 18:54 ` [PATCH v2 06/11] ARM: dts: imx7: Move nodes which have no reg property out of bus Fabio Estevam
@ 2017-11-29 18:54 ` Fabio Estevam
2017-11-29 18:54 ` [PATCH v2 08/11] ARM: dts: imx7s: Add unit address and reg for the anatop nodes Fabio Estevam
` (4 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: Fabio Estevam @ 2017-11-29 18:54 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@nxp.com>
Fix the unit address notation and pass bus-range property in order to
fix the following build warnings with W=1:
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (pci_bridge): Node /soc/aips-bus at 30800000/pcie at 0x33800000 missing bus-range for PCI bridge
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 30800000/pcie at 0x33800000 simple-bus unit address format error, expected "33800000"
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
Changes since v1:
- Fix Subject and commit log
arch/arm/boot/dts/imx7d.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 9d92725..200714e 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -132,7 +132,7 @@
status = "disabled";
};
- pcie: pcie at 0x33800000 {
+ pcie: pcie at 33800000 {
compatible = "fsl,imx7d-pcie", "snps,dw-pcie";
reg = <0x33800000 0x4000>,
<0x4ff00000 0x80000>;
@@ -140,6 +140,7 @@
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
+ bus-range = <0x00 0xff>;
ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
num-lanes = <1>;
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 08/11] ARM: dts: imx7s: Add unit address and reg for the anatop nodes
2017-11-29 18:54 [PATCH v2 01/11] ARM: dts: imx53: Move nodes which have no reg property out of bus Fabio Estevam
` (5 preceding siblings ...)
2017-11-29 18:54 ` [PATCH v2 07/11] ARM: dts: imx7d: Fix pcie node warnings Fabio Estevam
@ 2017-11-29 18:54 ` Fabio Estevam
2017-11-29 18:54 ` [PATCH v2 09/11] ARM: dts: vfxxx: Move nodes which have no reg property out of bus Fabio Estevam
` (3 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: Fabio Estevam @ 2017-11-29 18:54 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@nxp.com>
Add unit address and reg for the anatop nodes in order to fix the
following build warnings with W=1:
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 30000000/anatop at 30360000/regulator-vdd1p0d missing or empty reg/ranges property
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
Changes since v1:
- None
arch/arm/boot/dts/imx7s.dtsi | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 81467ac..2ceb37d 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -522,8 +522,11 @@
reg = <0x30360000 0x10000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_1p0d: regulator-vdd1p0d {
+ reg_1p0d: regulator-vdd1p0d at 30360210 {
+ reg = <0x30360210>;
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p0d";
regulator-min-microvolt = <800000>;
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 09/11] ARM: dts: vfxxx: Move nodes which have no reg property out of bus
2017-11-29 18:54 [PATCH v2 01/11] ARM: dts: imx53: Move nodes which have no reg property out of bus Fabio Estevam
` (6 preceding siblings ...)
2017-11-29 18:54 ` [PATCH v2 08/11] ARM: dts: imx7s: Add unit address and reg for the anatop nodes Fabio Estevam
@ 2017-11-29 18:54 ` Fabio Estevam
2017-11-29 18:54 ` [PATCH v2 10/11] ARM: dts: imx6sx: Fix spba-bus unit address Fabio Estevam
` (2 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: Fabio Estevam @ 2017-11-29 18:54 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@nxp.com>
Move iio-hwmon node from soc node to root node.
iio-hwmon node does not have any register properties and thus
shouldn't be placed on the bus.
This fixes the following build warnings with W=1:
arch/arm/boot/dts/vf500-colibri-eval-v3.dtb: Warning (simple_bus_reg): Node /soc/iio-hwmon missing or empty reg/ranges property
Based on a patch from Simon Horman for the renesas r8a7795 dtsi.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
Changes since v1:
- None
arch/arm/boot/dts/vfxxx.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 5d654b5..c3f09b7 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -84,6 +84,11 @@
mask = <0x1000>;
};
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 16>, <&adc1 16>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -762,10 +767,5 @@
status = "disabled";
};
};
-
- iio-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&adc0 16>, <&adc1 16>;
- };
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 10/11] ARM: dts: imx6sx: Fix spba-bus unit address
2017-11-29 18:54 [PATCH v2 01/11] ARM: dts: imx53: Move nodes which have no reg property out of bus Fabio Estevam
` (7 preceding siblings ...)
2017-11-29 18:54 ` [PATCH v2 09/11] ARM: dts: vfxxx: Move nodes which have no reg property out of bus Fabio Estevam
@ 2017-11-29 18:54 ` Fabio Estevam
2017-11-29 18:54 ` [PATCH v2 11/11] ARM: dts: vf500: Fix interrupt-controller " Fabio Estevam
2017-12-20 15:13 ` [PATCH v2 01/11] ARM: dts: imx53: Move nodes which have no reg property out of bus Shawn Guo
10 siblings, 0 replies; 14+ messages in thread
From: Fabio Estevam @ 2017-11-29 18:54 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@nxp.com>
The correct unit address for spba-bus is 0x2240000, so change it
accordingly in order to fix the following build warning with W=1:
arch/arm/boot/dts/imx6sx-sabreauto.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 2200000/spba-bus at 2200000 simple-bus unit address format error, expected "2240000"
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
arch/arm/boot/dts/imx6sx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 07ba518..5a5f796 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -1150,7 +1150,7 @@
reg = <0x02200000 0x100000>;
ranges;
- spba-bus at 2200000 {
+ spba-bus at 2240000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 11/11] ARM: dts: vf500: Fix interrupt-controller unit address
2017-11-29 18:54 [PATCH v2 01/11] ARM: dts: imx53: Move nodes which have no reg property out of bus Fabio Estevam
` (8 preceding siblings ...)
2017-11-29 18:54 ` [PATCH v2 10/11] ARM: dts: imx6sx: Fix spba-bus unit address Fabio Estevam
@ 2017-11-29 18:54 ` Fabio Estevam
2017-12-20 15:13 ` [PATCH v2 01/11] ARM: dts: imx53: Move nodes which have no reg property out of bus Shawn Guo
10 siblings, 0 replies; 14+ messages in thread
From: Fabio Estevam @ 2017-11-29 18:54 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@nxp.com>
The correct unit address for interrupt-controller is 0x40003000, so
change it accordingly in order to fix the following build warning
with W=1:
arch/arm/boot/dts/vf500-colibri-eval-v3.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 40000000/interrupt-controller at 40002000 simple-bus unit address format error, expected "40003000"
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
Changes since v1:
- None
arch/arm/boot/dts/vf500.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi
index 3d98961..348bcd3 100644
--- a/arch/arm/boot/dts/vf500.dtsi
+++ b/arch/arm/boot/dts/vf500.dtsi
@@ -58,7 +58,7 @@
soc {
aips-bus at 40000000 {
- intc: interrupt-controller at 40002000 {
+ intc: interrupt-controller at 40003000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 01/11] ARM: dts: imx53: Move nodes which have no reg property out of bus
2017-11-29 18:54 [PATCH v2 01/11] ARM: dts: imx53: Move nodes which have no reg property out of bus Fabio Estevam
` (9 preceding siblings ...)
2017-11-29 18:54 ` [PATCH v2 11/11] ARM: dts: vf500: Fix interrupt-controller " Fabio Estevam
@ 2017-12-20 15:13 ` Shawn Guo
10 siblings, 0 replies; 14+ messages in thread
From: Shawn Guo @ 2017-12-20 15:13 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Nov 29, 2017 at 04:54:34PM -0200, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
>
> Move pmu, usbphy0 and usbphy1 nodes from soc node to root node.
>
> The nodes that have been moved do not have any register properties and thus
> shouldn't be placed on the bus.
>
> This fixes the following build warnings with W=1:
>
> arch/arm/boot/dts/imx53-ard.dtb: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
> arch/arm/boot/dts/imx53-ard.dtb: Warning (simple_bus_reg): Node /soc/aips at 50000000/usbphy-0 missing or empty reg/ranges property
> arch/arm/boot/dts/imx53-ard.dtb: Warning (simple_bus_reg): Node /soc/aips at 50000000/usbphy-1 missing or empty reg/ranges property
> arch/arm/boot/dts/imx53-ard.dtb: Warning (simple_bus_reg): Node /soc/pmu missing or empty reg/ranges property
>
> Based on a patch from Simon Horman for r8a7795.dtsi.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Applied all, thanks.
^ permalink raw reply [flat|nested] 14+ messages in thread