* [PATCH] arm64: dts: ls208xa: add power monitor chip node
@ 2017-12-25 7:57 Yuantian Tang
2017-12-26 9:15 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Yuantian Tang @ 2017-12-25 7:57 UTC (permalink / raw)
To: linux-arm-kernel
Ina220 chip was used on ls208xardb platform to monitor power
comsumption. So add ina220 chip node in dts to enable power
consumption monitor feature.
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 11 +++++++++++
1 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 9a1d0d2..a75132c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -95,6 +95,17 @@
};
};
+ i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x02>;
+ ina220 at 40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <500>;
+ };
+ };
+
i2c at 3 {
#address-cells = <1>;
#size-cells = <0>;
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH] arm64: dts: ls208xa: add power monitor chip node
2017-12-25 7:57 [PATCH] arm64: dts: ls208xa: add power monitor chip node Yuantian Tang
@ 2017-12-26 9:15 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2017-12-26 9:15 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Dec 25, 2017 at 03:57:23PM +0800, Yuantian Tang wrote:
> Ina220 chip was used on ls208xardb platform to monitor power
> comsumption. So add ina220 chip node in dts to enable power
> consumption monitor feature.
>
> Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 11 +++++++++++
> 1 files changed, 11 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
> index 9a1d0d2..a75132c 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
> @@ -95,6 +95,17 @@
> };
> };
>
> + i2c at 2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x02>;
We generally have a newline between property list and child node. I
fixed it up and applied the patch.
Shawn
> + ina220 at 40 {
> + compatible = "ti,ina220";
> + reg = <0x40>;
> + shunt-resistor = <500>;
> + };
> + };
> +
> i2c at 3 {
> #address-cells = <1>;
> #size-cells = <0>;
> --
> 1.7.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-12-26 9:15 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-12-25 7:57 [PATCH] arm64: dts: ls208xa: add power monitor chip node Yuantian Tang
2017-12-26 9:15 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).