From: steve.capper@arm.com (Steve Capper)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3 1/3] arm64: Re-order reserved_ttbr0 in linker script
Date: Tue, 2 Jan 2018 15:12:52 +0000 [thread overview]
Message-ID: <20180102151254.4063-2-steve.capper@arm.com> (raw)
In-Reply-To: <20180102151254.4063-1-steve.capper@arm.com>
Currently one resolves the location of the reserved_ttbr0 for PAN by
taking a positive offset from swapper_pg_dir. In a future patch we wish
to extend the swapper s.t. its size is determined at link time rather
than comile time, rendering SWAPPER_DIR_SIZE unsuitable for such a low
level calculation.
In this patch we re-arrange the order of the linker script s.t. instead
one computes reserved_ttbr0 by subtracting RESERVED_TTBR0_SIZE from
swapper_pg_dir.
Signed-off-by: Steve Capper <steve.capper@arm.com>
---
Changed in V3: corrected comment, added Ard's reviewed-by,
Rebased on top of kpti
Ard, Mark, I removed your tags because I had to add a change for
asm-uaccess.h. Please let me know if it's okay for me to put your tags
back?
Cheers,
--
Steve
---
arch/arm64/include/asm/asm-uaccess.h | 8 ++++----
arch/arm64/include/asm/uaccess.h | 4 ++--
arch/arm64/kernel/vmlinux.lds.S | 5 ++---
3 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/include/asm/asm-uaccess.h b/arch/arm64/include/asm/asm-uaccess.h
index f4f234b6155e..8719ce122a38 100644
--- a/arch/arm64/include/asm/asm-uaccess.h
+++ b/arch/arm64/include/asm/asm-uaccess.h
@@ -13,11 +13,11 @@
*/
#ifdef CONFIG_ARM64_SW_TTBR0_PAN
.macro __uaccess_ttbr0_disable, tmp1
- mrs \tmp1, ttbr1_el1 // swapper_pg_dir
- add \tmp1, \tmp1, #SWAPPER_DIR_SIZE // reserved_ttbr0 at the end of swapper_pg_dir
- msr ttbr0_el1, \tmp1 // set reserved TTBR0_EL1
+ mrs \tmp1, ttbr1_el1 // swapper_pg_dir
+ sub \tmp1, \tmp1, #RESERVED_TTBR0_SIZE // reserved_ttbr0 just before swapper_pg_dir
+ msr ttbr0_el1, \tmp1 // set reserved TTBR0_EL1
isb
- sub \tmp1, \tmp1, #SWAPPER_DIR_SIZE
+ add \tmp1, \tmp1, #RESERVED_TTBR0_SIZE
bic \tmp1, \tmp1, #TTBR_ASID_MASK
msr ttbr1_el1, \tmp1 // set reserved ASID
isb
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
index 6eadf55ebaf0..e269d35372cf 100644
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@@ -108,8 +108,8 @@ static inline void __uaccess_ttbr0_disable(void)
unsigned long ttbr;
ttbr = read_sysreg(ttbr1_el1);
- /* reserved_ttbr0 placed at the end of swapper_pg_dir */
- write_sysreg(ttbr + SWAPPER_DIR_SIZE, ttbr0_el1);
+ /* reserved_ttbr0 placed before swapper_pg_dir */
+ write_sysreg(ttbr - RESERVED_TTBR0_SIZE, ttbr0_el1);
isb();
/* Set reserved ASID */
ttbr &= ~TTBR_ASID_MASK;
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
index ddfd3c0942f7..8e567de8f369 100644
--- a/arch/arm64/kernel/vmlinux.lds.S
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -218,13 +218,12 @@ SECTIONS
. = ALIGN(PAGE_SIZE);
idmap_pg_dir = .;
. += IDMAP_DIR_SIZE;
- swapper_pg_dir = .;
- . += SWAPPER_DIR_SIZE;
-
#ifdef CONFIG_ARM64_SW_TTBR0_PAN
reserved_ttbr0 = .;
. += RESERVED_TTBR0_SIZE;
#endif
+ swapper_pg_dir = .;
+ . += SWAPPER_DIR_SIZE;
#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
tramp_pg_dir = .;
--
2.11.0
next prev parent reply other threads:[~2018-01-02 15:12 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-02 15:12 [PATCH V3 0/3] Map larger kernels at early init Steve Capper
2018-01-02 15:12 ` Steve Capper [this message]
2018-01-02 15:12 ` [PATCH V3 2/3] arm64: entry: Move the trampoline to be before PAN Steve Capper
2018-01-02 15:12 ` [PATCH V3 3/3] arm64: Extend early page table code to allow for larger kernels Steve Capper
2018-01-02 22:01 ` Ard Biesheuvel
2018-01-03 16:20 ` Steve Capper
2018-01-03 16:38 ` Ard Biesheuvel
2018-01-03 17:11 ` Steve Capper
2018-01-03 17:28 ` Ard Biesheuvel
2018-01-04 21:41 ` Jeremy Linton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180102151254.4063-2-steve.capper@arm.com \
--to=steve.capper@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).