From: bjorn.andersson@linaro.org (Bjorn Andersson)
To: linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH v2 10/15] ASoC: qcom: qdsp6: Add support to q6routing driver
Date: Tue, 2 Jan 2018 15:00:07 -0800 [thread overview]
Message-ID: <20180102230007.GR478@tuxbook> (raw)
In-Reply-To: <20171214173402.19074-11-srinivas.kandagatla@linaro.org>
On Thu 14 Dec 09:33 PST 2017, srinivas.kandagatla at linaro.org wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>
> This patch adds support to q6 routing driver which configures route
> between ASM and AFE module using ADM apis.
>
> This driver uses dapm widgets to setup the matrix between AFE ports and
> ASM streams.
>
Why is this a separate driver from the q6adm?
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
> sound/soc/qcom/Kconfig | 5 +
> sound/soc/qcom/qdsp6/Makefile | 1 +
> sound/soc/qcom/qdsp6/q6routing.c | 386 +++++++++++++++++++++++++++++++++++++++
> sound/soc/qcom/qdsp6/q6routing.h | 9 +
> 4 files changed, 401 insertions(+)
> create mode 100644 sound/soc/qcom/qdsp6/q6routing.c
> create mode 100644 sound/soc/qcom/qdsp6/q6routing.h
>
> diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
> index 121b9c957024..dd8fb0cde614 100644
> --- a/sound/soc/qcom/Kconfig
> +++ b/sound/soc/qcom/Kconfig
> @@ -60,12 +60,17 @@ config SND_SOC_QDSP6_CORE
> tristate
> default n
>
> +config SND_SOC_QDSP6_ROUTING
> + tristate
> + default n
> +
> config SND_SOC_QDSP6
> tristate "SoC ALSA audio driver for QDSP6"
> select SND_SOC_QDSP6_AFE
> select SND_SOC_QDSP6_ADM
> select SND_SOC_QDSP6_ASM
> select SND_SOC_QDSP6_CORE
> + select SND_SOC_QDSP6_ROUTING
> help
> To add support for MSM QDSP6 Soc Audio.
> This will enable sound soc platform specific
> diff --git a/sound/soc/qcom/qdsp6/Makefile b/sound/soc/qcom/qdsp6/Makefile
> index ad7f10691e54..c1ad060a2341 100644
> --- a/sound/soc/qcom/qdsp6/Makefile
> +++ b/sound/soc/qcom/qdsp6/Makefile
> @@ -2,3 +2,4 @@ obj-$(CONFIG_SND_SOC_QDSP6_AFE) += q6afe.o
> obj-$(CONFIG_SND_SOC_QDSP6_ADM) += q6adm.o
> obj-$(CONFIG_SND_SOC_QDSP6_ASM) += q6asm.o
> obj-$(CONFIG_SND_SOC_QDSP6_CORE) += q6core.o
> +obj-$(CONFIG_SND_SOC_QDSP6_ROUTING) += q6routing.o
> diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c
> new file mode 100644
> index 000000000000..f5f12d61a1ee
> --- /dev/null
> +++ b/sound/soc/qcom/qdsp6/q6routing.c
> @@ -0,0 +1,386 @@
> +/* SPDX-License-Identifier: GPL-2.0
> +* Copyright (c) 2011-2016, The Linux Foundation
> +* Copyright (c) 2017, Linaro Limited
> +*/
> +#include <linux/init.h>
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/bitops.h>
> +#include <linux/mutex.h>
> +#include <linux/of_device.h>
> +#include <linux/slab.h>
> +#include <sound/core.h>
> +#include <sound/soc.h>
> +#include <sound/soc-dapm.h>
> +#include <sound/pcm.h>
> +#include <sound/control.h>
> +#include <sound/asound.h>
> +#include <sound/pcm_params.h>
> +#include "q6afe.h"
> +#include "q6asm.h"
> +#include "q6adm.h"
> +#include "q6routing.h"
> +
> +struct session_data {
> + int state;
> + int port_id;
> + int path_type;
> + int app_type;
> + int acdb_id;
> + int sample_rate;
> + int bits_per_sample;
> + int channels;
> + int format;
> + int perf_mode;
> + int numcopps;
> + int fedai_id;
> + unsigned long copp_map;
> +};
> +
> +struct msm_routing_data {
> + struct session_data sessions[MAX_SESSIONS];
> + struct device *dev;
> + struct mutex lock;
> +};
> +
> +static struct msm_routing_data *routing_data;
> +
> +/**
> + * q6routing_reg_phy_stream() - Register a new stream for route setup
> + *
> + * @fedai_id: Frontend dai id.
> + * @perf_mode: Performace mode.
"Performance"
> + * @stream_id: ASM stream id to map.
> + * @stream_type: Direction of stream
> + *
> + * Return: Will be an negative on error or a zero on success.
> + */
> +int q6routing_reg_phy_stream(int fedai_id, int perf_mode,
q6routing_stream_open() ?
> + int stream_id, int stream_type)
> +{
> + int j, topology, num_copps = 0;
> + struct route_payload payload;
> + int copp_idx;
> + struct session_data *session;
> +
> + if (!routing_data) {
> + pr_err("Routing driver not yet ready\n");
> + return -EINVAL;
> + }
> +
> + session = &routing_data->sessions[stream_id - 1];
> + mutex_lock(&routing_data->lock);
> + session->fedai_id = fedai_id;
> + payload.num_copps = 0; /* only RX needs to use payload */
> + topology = NULL_COPP_TOPOLOGY;
> + copp_idx = q6adm_open(routing_data->dev, session->port_id,
> + session->path_type, session->sample_rate,
> + session->channels, topology, perf_mode,
> + session->bits_per_sample, 0, 0);
> + if ((copp_idx < 0) || (copp_idx >= MAX_COPPS_PER_PORT)) {
Make q6adm_open() not return >= MAX_COPPS_PER_PORT.
And drop the extra parenthesis.
> + mutex_unlock(&routing_data->lock);
> + return -EINVAL;
> + }
> +
> + set_bit(copp_idx, &session->copp_map);
> + for (j = 0; j < MAX_COPPS_PER_PORT; j++) {
Use for_each_set_bit()
> + unsigned long copp = session->copp_map;
> +
> + if (test_bit(j, &copp)) {
> + payload.port_id[num_copps] = session->port_id;
> + payload.copp_idx[num_copps] = j;
> + num_copps++;
> + }
> + }
> +
> + if (num_copps) {
> + payload.num_copps = num_copps;
> + payload.session_id = stream_id;
> + q6adm_matrix_map(routing_data->dev, session->path_type,
> + payload, perf_mode);
> + }
> + mutex_unlock(&routing_data->lock);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(q6routing_reg_phy_stream);
> +
> +static struct session_data *routing_get_session(struct msm_routing_data *data,
> + int port_id, int port_type)
port_type is ignored
> +{
> + int i;
> +
> + for (i = 0; i < MAX_SESSIONS; i++)
> + if (port_id == data->sessions[i].port_id)
> + return &data->sessions[i];
> +
> + return NULL;
> +}
> +
> +static struct session_data *get_session_from_id(struct msm_routing_data *data,
> + int fedai_id)
> +{
> + int i;
> +
> + for (i = 0; i < MAX_SESSIONS; i++) {
> + if (fedai_id == data->sessions[i].fedai_id)
> + return &data->sessions[i];
> + }
> +
> + return NULL;
> +}
> +/**
> + * q6routing_dereg_phy_stream() - Deregister a stream
> + *
> + * @fedai_id: Frontend dai id.
> + * @stream_type: Direction of stream
> + *
> + * Return: Will be an negative on error or a zero on success.
> + */
> +void q6routing_dereg_phy_stream(int fedai_id, int stream_type)
q6routing_stream_close()?
> +{
> + struct session_data *session;
> + int idx;
> +
> + session = get_session_from_id(routing_data, fedai_id);
> + if (!session)
> + return;
> +
> + for_each_set_bit(idx, &session->copp_map, MAX_COPPS_PER_PORT)
> + q6adm_close(routing_data->dev, session->port_id,
> + session->perf_mode, idx);
> +
> + session->fedai_id = -1;
> + session->copp_map = 0;
> +}
> +EXPORT_SYMBOL_GPL(q6routing_dereg_phy_stream);
> +
> +static int msm_routing_get_audio_mixer(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct snd_soc_dapm_context *dapm =
> + snd_soc_dapm_kcontrol_dapm(kcontrol);
> + struct soc_mixer_control *mc =
> + (struct soc_mixer_control *)kcontrol->private_value;
> + int session_id = mc->shift;
> + struct snd_soc_platform *platform = snd_soc_dapm_to_platform(dapm);
> + struct msm_routing_data *priv = snd_soc_platform_get_drvdata(platform);
> + struct session_data *session = &priv->sessions[session_id];
> +
> + if (session->port_id != -1)
> + ucontrol->value.integer.value[0] = 1;
> + else
> + ucontrol->value.integer.value[0] = 0;
> +
> + return 0;
> +}
> +
> +static int msm_routing_put_audio_mixer(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct snd_soc_dapm_context *dapm =
> + snd_soc_dapm_kcontrol_dapm(kcontrol);
> + struct snd_soc_platform *platform = snd_soc_dapm_to_platform(dapm);
> + struct msm_routing_data *data = snd_soc_platform_get_drvdata(platform);
> + struct soc_mixer_control *mc =
> + (struct soc_mixer_control *)kcontrol->private_value;
> + struct snd_soc_dapm_update *update = NULL;
> + int be_id = mc->reg;
> + int session_id = mc->shift;
> + struct session_data *session = &data->sessions[session_id];
> +
> + if (ucontrol->value.integer.value[0]) {
> + session->port_id = be_id;
> + snd_soc_dapm_mixer_update_power(dapm, kcontrol, 1, update);
> + } else {
> + session->port_id = -1;
> + snd_soc_dapm_mixer_update_power(dapm, kcontrol, 0, update);
> + }
> +
> + return 1;
> +}
> +
> +static const struct snd_kcontrol_new hdmi_mixer_controls[] = {
> + SOC_SINGLE_EXT("MultiMedia1", AFE_PORT_HDMI_RX,
> + MSM_FRONTEND_DAI_MULTIMEDIA1, 1, 0,
> + msm_routing_get_audio_mixer,
> + msm_routing_put_audio_mixer),
> + SOC_SINGLE_EXT("MultiMedia2", AFE_PORT_HDMI_RX,
> + MSM_FRONTEND_DAI_MULTIMEDIA2, 1, 0,
> + msm_routing_get_audio_mixer,
> + msm_routing_put_audio_mixer),
> + SOC_SINGLE_EXT("MultiMedia3", AFE_PORT_HDMI_RX,
> + MSM_FRONTEND_DAI_MULTIMEDIA3, 1, 0,
> + msm_routing_get_audio_mixer,
> + msm_routing_put_audio_mixer),
> + SOC_SINGLE_EXT("MultiMedia4", AFE_PORT_HDMI_RX,
> + MSM_FRONTEND_DAI_MULTIMEDIA4, 1, 0,
> + msm_routing_get_audio_mixer,
> + msm_routing_put_audio_mixer),
> + SOC_SINGLE_EXT("MultiMedia5", AFE_PORT_HDMI_RX,
> + MSM_FRONTEND_DAI_MULTIMEDIA5, 1, 0,
> + msm_routing_get_audio_mixer,
> + msm_routing_put_audio_mixer),
> + SOC_SINGLE_EXT("MultiMedia6", AFE_PORT_HDMI_RX,
> + MSM_FRONTEND_DAI_MULTIMEDIA6, 1, 0,
> + msm_routing_get_audio_mixer,
> + msm_routing_put_audio_mixer),
> + SOC_SINGLE_EXT("MultiMedia7", AFE_PORT_HDMI_RX,
> + MSM_FRONTEND_DAI_MULTIMEDIA7, 1, 0,
> + msm_routing_get_audio_mixer,
> + msm_routing_put_audio_mixer),
> + SOC_SINGLE_EXT("MultiMedia8", AFE_PORT_HDMI_RX,
> + MSM_FRONTEND_DAI_MULTIMEDIA8, 1, 0,
> + msm_routing_get_audio_mixer,
> + msm_routing_put_audio_mixer),
> +};
> +
> +static const struct snd_soc_dapm_widget msm_qdsp6_widgets[] = {
> + /* Frontend AIF */
> + /* Widget name equals to Front-End DAI name<Need confirmation>,
Perhaps this should be confirmed and the comment updated?
> + * Stream name must contains substring of front-end dai name
> + */
> + SND_SOC_DAPM_AIF_IN("MM_DL1", "MultiMedia1 Playback", 0, 0, 0, 0),
> + SND_SOC_DAPM_AIF_IN("MM_DL2", "MultiMedia2 Playback", 0, 0, 0, 0),
> + SND_SOC_DAPM_AIF_IN("MM_DL3", "MultiMedia3 Playback", 0, 0, 0, 0),
> + SND_SOC_DAPM_AIF_IN("MM_DL4", "MultiMedia4 Playback", 0, 0, 0, 0),
> + SND_SOC_DAPM_AIF_IN("MM_DL5", "MultiMedia5 Playback", 0, 0, 0, 0),
> + SND_SOC_DAPM_AIF_IN("MM_DL6", "MultiMedia6 Playback", 0, 0, 0, 0),
> + SND_SOC_DAPM_AIF_IN("MM_DL7", "MultiMedia7 Playback", 0, 0, 0, 0),
> + SND_SOC_DAPM_AIF_IN("MM_DL8", "MultiMedia8 Playback", 0, 0, 0, 0),
> +
> + /* Mixer definitions */
> + SND_SOC_DAPM_MIXER("HDMI Mixer", SND_SOC_NOPM, 0, 0,
> + hdmi_mixer_controls,
> + ARRAY_SIZE(hdmi_mixer_controls)),
> +};
> +
> +static const struct snd_soc_dapm_route intercon[] = {
> + {"HDMI Mixer", "MultiMedia1", "MM_DL1"},
> + {"HDMI Mixer", "MultiMedia2", "MM_DL2"},
> + {"HDMI Mixer", "MultiMedia3", "MM_DL3"},
> + {"HDMI Mixer", "MultiMedia4", "MM_DL4"},
> + {"HDMI Mixer", "MultiMedia5", "MM_DL5"},
> + {"HDMI Mixer", "MultiMedia6", "MM_DL6"},
> + {"HDMI Mixer", "MultiMedia7", "MM_DL7"},
> + {"HDMI Mixer", "MultiMedia8", "MM_DL8"},
> + {"HDMI", NULL, "HDMI Mixer"},
> + {"HDMI-RX", NULL, "HDMI"},
> +};
> +
> +static int routing_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + unsigned int be_id = rtd->cpu_dai->id;
> + struct snd_soc_platform *platform = rtd->platform;
> + struct msm_routing_data *data = snd_soc_platform_get_drvdata(platform);
> + struct session_data *session;
> + int port_id, port_type, path_type, bits_per_sample;
bits_per_sample is likely unused.
> +
> + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
> + path_type = ADM_PATH_PLAYBACK;
> + port_type = MSM_AFE_PORT_TYPE_RX;
> + }
> +
> + port_id = be_id;
Why alias this variable?
> +
> + session = routing_get_session(data, port_id, port_type);
> +
> + if (!session) {
> + pr_err("No session matrix setup yet..\n");
> + return -EINVAL;
> + }
> +
> + mutex_lock(&data->lock);
> +
> + session->path_type = path_type;
> + session->sample_rate = params_rate(params);
> + session->channels = params_channels(params);
> + session->format = params_format(params);
> +
> + if (session->format == SNDRV_PCM_FORMAT_S16_LE)
> + session->bits_per_sample = 16;
> + else if (session->format == SNDRV_PCM_FORMAT_S24_LE)
> + bits_per_sample = 24;
session-> ?
Perhaps switch on params_format(params) instead? And fail in the default
case.
> +
> + mutex_unlock(&data->lock);
> + return 0;
> +}
> +
> +static int routing_close(struct snd_pcm_substream *substream)
> +{
> + return 0;
> +}
> +
> +static int routing_prepare(struct snd_pcm_substream *substream)
> +{
> + return 0;
> +}
> +
> +static struct snd_pcm_ops q6pcm_routing_ops = {
> + .hw_params = routing_hw_params,
> + .close = routing_close,
> + .prepare = routing_prepare,
> +};
> +
> +/* Not used but frame seems to require it */
Remove comment?
> +static int msm_routing_probe(struct snd_soc_platform *platform)
> +{
> + int i;
> +
> + for (i = 0; i < MAX_SESSIONS; i++)
> + routing_data->sessions[i].port_id = -1;
> +
> + snd_soc_platform_set_drvdata(platform, routing_data);
> +
> + return 0;
> +}
> +
> +static struct snd_soc_platform_driver msm_soc_routing_platform = {
> + .ops = &q6pcm_routing_ops,
> + .probe = msm_routing_probe,
> + .component_driver = {
> + .dapm_widgets = msm_qdsp6_widgets,
> + .num_dapm_widgets = ARRAY_SIZE(msm_qdsp6_widgets),
> + .dapm_routes = intercon,
> + .num_dapm_routes = ARRAY_SIZE(intercon),
> + },
> +};
> +
> +static int q6pcm_routing_probe(struct platform_device *pdev)
> +{
> +
> + routing_data = devm_kzalloc(&pdev->dev,
> + sizeof(*routing_data), GFP_KERNEL);
> + if (!routing_data)
> + return -ENOMEM;
> +
> + routing_data->dev = &pdev->dev;
> +
> + mutex_init(&routing_data->lock);
> + dev_set_drvdata(&pdev->dev, routing_data);
> +
> + return devm_snd_soc_register_platform(&pdev->dev,
> + &msm_soc_routing_platform);
> +}
> +
> +static int q6pcm_routing_remove(struct platform_device *pdev)
> +{
As you return here routing_data will be freed. The early check in
q6routing_reg_phy_stream() seems to indicate that this driver can be
called even though the routing device isn't available.
So you probably want to clear that variable, at least.
> + return 0;
> +}
> +
> +static struct platform_driver q6pcm_routing_driver = {
> + .driver = {
> + .name = "q6routing",
> + .owner = THIS_MODULE,
Drop .owner
> + },
> + .probe = q6pcm_routing_probe,
> + .remove = q6pcm_routing_remove,
> +};
> +
> +module_platform_driver(q6pcm_routing_driver);
> +
> +MODULE_DESCRIPTION("Q6 Routing platform");
> +MODULE_LICENSE("GPL v2");
> diff --git a/sound/soc/qcom/qdsp6/q6routing.h b/sound/soc/qcom/qdsp6/q6routing.h
> new file mode 100644
> index 000000000000..7f0feb196acc
> --- /dev/null
> +++ b/sound/soc/qcom/qdsp6/q6routing.h
> @@ -0,0 +1,9 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _Q6_PCM_ROUTING_H
> +#define _Q6_PCM_ROUTING_H
> +
> +int q6routing_reg_phy_stream(int fedai_id, int perf_mode,
> + int stream_id, int stream_type);
> +void q6routing_dereg_phy_stream(int fedai_id, int stream_type);
> +
> +#endif /*_Q6_PCM_ROUTING_H */
> --
> 2.15.0
>
next prev parent reply other threads:[~2018-01-02 23:00 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-14 17:33 [RESEND PATCH v2 00/15] ASoC: qcom: Add support to QDSP6 based audio srinivas.kandagatla at linaro.org
2017-12-14 17:33 ` [RESEND PATCH v2 01/15] dt-bindings: soc: qcom: Add bindings for APR bus srinivas.kandagatla at linaro.org
2017-12-16 17:27 ` Rob Herring
2017-12-18 9:50 ` Srinivas Kandagatla
2018-01-03 0:35 ` Bjorn Andersson
2018-01-03 16:26 ` Srinivas Kandagatla
2017-12-14 17:33 ` [RESEND PATCH v2 02/15] soc: qcom: add support to APR bus driver srinivas.kandagatla at linaro.org
2018-01-01 23:29 ` Bjorn Andersson
2018-01-03 16:26 ` Srinivas Kandagatla
2017-12-14 17:33 ` [RESEND PATCH v2 03/15] ASoC: qcom: qdsp6: Add common qdsp6 helper functions srinivas.kandagatla at linaro.org
2018-01-02 0:19 ` Bjorn Andersson
2018-01-03 16:26 ` Srinivas Kandagatla
2017-12-14 17:33 ` [RESEND PATCH v2 04/15] ASoC: qcom: qdsp6: Add support to Q6AFE srinivas.kandagatla at linaro.org
2018-01-02 0:45 ` Bjorn Andersson
2018-01-03 16:26 ` Srinivas Kandagatla
2017-12-14 17:33 ` [RESEND PATCH v2 05/15] ASoC: qcom: qdsp6: Add support to Q6ADM srinivas.kandagatla at linaro.org
2018-01-02 1:50 ` Bjorn Andersson
2018-01-03 16:26 ` Srinivas Kandagatla
2017-12-14 17:33 ` [RESEND PATCH v2 06/15] ASoC: qcom: qdsp6: Add support to Q6ASM srinivas.kandagatla at linaro.org
2018-01-02 4:43 ` Bjorn Andersson
2018-01-03 16:26 ` Srinivas Kandagatla
2017-12-14 17:33 ` [RESEND PATCH v2 07/15] ASoC: qcom: q6asm: Add support to memory map and unmap srinivas.kandagatla at linaro.org
2018-01-02 5:48 ` Bjorn Andersson
2018-01-03 16:26 ` Srinivas Kandagatla
2018-01-03 19:39 ` Bjorn Andersson
2017-12-14 17:33 ` [RESEND PATCH v2 08/15] ASoC: qcom: q6asm: add support to audio stream apis srinivas.kandagatla at linaro.org
2018-01-02 20:08 ` Bjorn Andersson
2018-01-03 16:26 ` Srinivas Kandagatla
2018-01-13 8:42 ` [alsa-devel] " Rohit Kumar
2017-12-14 17:33 ` [RESEND PATCH v2 09/15] ASoC: qcom: qdsp6: Add support to Q6CORE srinivas.kandagatla at linaro.org
2018-01-02 22:15 ` Bjorn Andersson
2018-01-03 16:27 ` Srinivas Kandagatla
2018-02-07 12:15 ` [alsa-devel] " Rohit Kumar
2017-12-14 17:33 ` [RESEND PATCH v2 10/15] ASoC: qcom: qdsp6: Add support to q6routing driver srinivas.kandagatla at linaro.org
2018-01-02 23:00 ` Bjorn Andersson [this message]
2018-01-03 16:27 ` Srinivas Kandagatla
2017-12-14 17:33 ` [RESEND PATCH v2 11/15] ASoC: qcom: qdsp6: Add support to q6afe dai driver srinivas.kandagatla at linaro.org
2018-01-02 23:28 ` Bjorn Andersson
2018-01-03 16:27 ` Srinivas Kandagatla
2018-02-07 11:34 ` [alsa-devel] " Rohit Kumar
2018-02-07 11:40 ` Srinivas Kandagatla
2017-12-14 17:33 ` [RESEND PATCH v2 12/15] ASoC: qcom: qdsp6: Add support to q6asm " srinivas.kandagatla at linaro.org
2018-01-03 0:03 ` Bjorn Andersson
2018-01-03 16:27 ` Srinivas Kandagatla
2018-01-13 8:45 ` [alsa-devel] " Rohit Kumar
2017-12-14 17:34 ` [RESEND PATCH v2 13/15] dt-bindings: sound: qcom: Add devicetree bindings for apq8096 srinivas.kandagatla at linaro.org
2017-12-16 17:44 ` Rob Herring
2017-12-18 9:49 ` Srinivas Kandagatla
2018-01-03 0:28 ` Bjorn Andersson
2018-01-03 16:27 ` Srinivas Kandagatla
2018-01-03 19:49 ` Bjorn Andersson
2017-12-14 17:34 ` [RESEND PATCH v2 14/15] ASoC: qcom: apq8096: Add db820c machine driver srinivas.kandagatla at linaro.org
2018-01-03 0:16 ` Bjorn Andersson
2018-01-03 16:27 ` Srinivas Kandagatla
2018-01-03 20:04 ` Bjorn Andersson
2018-01-03 17:20 ` Stephen Boyd
2018-01-03 18:36 ` Srinivas Kandagatla
2018-01-03 19:41 ` Stephen Boyd
2018-01-04 9:25 ` Srinivas Kandagatla
2018-01-04 12:02 ` Mark Brown
2018-01-04 13:44 ` Srinivas Kandagatla
2018-01-04 14:03 ` Mark Brown
2017-12-14 17:34 ` [RESEND PATCH v2 15/15] arm64: dts: msm8996: db820c: Add sound card support srinivas.kandagatla at linaro.org
2018-01-03 0:22 ` Bjorn Andersson
2018-01-03 16:27 ` Srinivas Kandagatla
2018-01-03 20:01 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180102230007.GR478@tuxbook \
--to=bjorn.andersson@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).