From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: sun8i: a83t: bananapi-m3: Add LED device nodes
Date: Wed, 3 Jan 2018 14:28:44 +0800 [thread overview]
Message-ID: <20180103062844.30315-1-wens@csie.org> (raw)
The Bananapi M3 has two controllable LEDs, blue and green, that are tied
to the PMIC's two GPIO pins.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 6550bf0e594b..78fe61d97790 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -60,6 +60,20 @@
stdout-path = "serial0:115200n8";
};
+ leds {
+ compatible = "gpio-leds";
+
+ blue {
+ label = "bananapi-m3:blue:usr";
+ gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ green {
+ label = "bananapi-m3:green:usr";
+ gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
reg_usb1_vbus: reg-usb1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb1-vbus";
--
2.15.1
next reply other threads:[~2018-01-03 6:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-03 6:28 Chen-Yu Tsai [this message]
2018-01-04 14:10 ` [PATCH] ARM: dts: sun8i: a83t: bananapi-m3: Add LED device nodes Maxime Ripard
2018-02-13 9:54 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180103062844.30315-1-wens@csie.org \
--to=wens@csie.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox