From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Thu, 4 Jan 2018 15:01:19 +0100 Subject: [PATCH v2] ARM: dts: sunxi: Add sid for a83t In-Reply-To: References: <20171219210523.10428-1-kevans91@ksu.edu> <20171221145512.llxvzkcrjpquhczi@flea.lan> <20171221152630.2vf57x5o2yi5sv3n@flea.lan> <20171221190903.56ebae536acf51401c63802c@bidouilliste.com> <20171222083508.dfcp6egfvxykmogg@flea.lan> <20171222110727.520df7394234f6a5dc0b9ec0@bidouilliste.com> Message-ID: <20180104140119.5pyfihp4zs2poz35@flea.lan> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Dec 22, 2017 at 06:11:52PM +0800, Chen-Yu Tsai wrote: > On Fri, Dec 22, 2017 at 6:07 PM, Emmanuel Vadot wrote: > > On Fri, 22 Dec 2017 09:35:08 +0100 > > Maxime Ripard wrote: > > > >> On Thu, Dec 21, 2017 at 07:09:03PM +0100, Emmanuel Vadot wrote: > >> > > >> > Hi Maxime, > >> > > >> > On Thu, 21 Dec 2017 16:26:30 +0100 > >> > Maxime Ripard wrote: > >> > > >> > > Hi, > >> > > > >> > > On Thu, Dec 21, 2017 at 09:19:24AM -0600, Kyle Evans wrote: > >> > > > On Thu, Dec 21, 2017 at 8:55 AM, Maxime Ripard > >> > > > wrote: > >> > > > > Hi Kyle, > >> > > > > > >> > > > > On Tue, Dec 19, 2017 at 03:05:23PM -0600, kevans91 at ksu.edu wrote: > >> > > > >> Allwinner a83t has a 1 KB sid block with efuse for security rootkey and > >> > > > >> thermal calibration data, add node to describe it. > >> > > > >> > >> > > > >> a83t-sid is not currently supported by nvmem/sunxi-sid, but it is > >> > > > >> supported in an external driver for FreeBSD. > >> > > > >> > >> > > > >> Signed-off-by: Kyle Evans > >> > > > > > >> > > > > The patch looks fine in itself, but we've had a number of issues with > >> > > > > the register layout (and access patterns) in the past, so I'd rather > >> > > > > have something that works in Linux too if possible. > >> > > > > >> > > > I have a patch that I think should make it work fine on Linux [1], but > >> > > > I'm afraid I have little to no capability to test it myself and so I > >> > > > did not add it as well. > >> > > > > >> > > > I do know that the rootkey is offset 0x200 into the given space [2], > >> > > > as is the case with the H3, and that the readout quirk is not needed. > >> > > > I wasn't 100% sure that the a83t has 2Kbit worth of efuse space as the > >> > > > H3, but I do know that thermal data can be found at 0x34 and 0x38 in > >> > > > this space. > >> > > > >> > > Then maybe we should leave it aside until someone takes some time on > >> > > the A83t. > >> > > >> > Take some time on the Linux driver and do not apply this patch for > >> > now you mean ? > >> > >> Yep. > >> > >> Maxime > > > > Since linux doesn't have the compatible in it's driver what would > > be the harm to add the node in the DTS ? If a quirks is needed because > > some region is weird this would go in the driver right ? I don't see a > > technical problem for adding this node right now. > > If Kyle confirm the lenght of the region and that no quirk is needed > > will it be enough ? > > I guess I wasn't very clear. I'm OK with the patch going in. The device > node currently says nothing about how much efuse space there is. The > memory region covers that and the control section, and the size matches > what the memory map says. > > The size and offset of the efuse space would be dealt with in the driver. Let's merge it then. Acked-by: Maxime Ripard Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: