Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: liwei213@huawei.com (Li Wei)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 2/5] dt-bindings: scsi: ufs: add document for hisi-ufs
Date: Sat, 6 Jan 2018 17:51:14 +0800	[thread overview]
Message-ID: <20180106095117.67907-3-liwei213@huawei.com> (raw)
In-Reply-To: <20180106095117.67907-1-liwei213@huawei.com>

add ufs node document for Hisilicon.

Signed-off-by: Li Wei <liwei213@huawei.com>
---
 Documentation/devicetree/bindings/ufs/ufs-hisi.txt | 43 ++++++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ufs/ufs-hisi.txt

diff --git a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
new file mode 100644
index 000000000000..175693e47d6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
@@ -0,0 +1,43 @@
+* Hisilicon Universal Flash Storage (UFS) Host Controller
+
+UFS nodes are defined to describe on-chip UFS hardware macro.
+Each UFS Host Controller should have its own node.
+
+Required properties:
+- compatible        : compatible list, contains one of the following -
+					"hisilicon,hi3660-ufs", "jedec,ufs-1.1" for hisi ufs
+					host controller present on Hi36xx chipset.
+- reg               : should contain UFS register address space & UFS SYS CTRL register address,
+- interrupt-parent  : interrupt device
+- interrupts        : interrupt number
+- clocks	        : List of phandle and clock specifier pairs
+- clock-names       : List of clock input name strings sorted in the same
+					order as the clocks property. "ref_clk", "phy_clk" is optional
+- freq-table-hz		: Array of <min max> operating frequencies stored in the same
+                          order as the clocks property. If this property is not
+			  defined or a value in the array is "0" then it is assumed
+			  that the frequency is set by the parent clock or a
+			  fixed rate clock source.
+- resets            : reset node register, one reset the clk and the other reset the controller
+- reset-names       : describe reset node register
+
+Example:
+
+	ufs: ufs at ff3b0000 {
+		compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
+		/* 0: HCI standard */
+		/* 1: UFS SYS CTRL */
+		reg = <0x0 0xff3b0000 0x0 0x1000>,
+			<0x0 0xff3b1000 0x0 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
+			<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
+		clock-names = "ref_clk", "phy_clk";
+		freq-table-hz = <0 0>, <0 0>;
+		/* offset: 0x84; bit: 12 */
+		/* offset: 0x84; bit: 7  */
+		resets = <&crg_rst 0x84 12>,
+			<&crg_rst 0x84 7>;
+		reset-names = "rst", "assert";
+	};
-- 
2.15.0

  parent reply	other threads:[~2018-01-06  9:51 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-06  9:51 [PATCH v7 0/5] scsi: ufs: add ufs driver code for Hisilicon Hi3660 SoC Li Wei
2018-01-06  9:51 ` [PATCH v7 1/5] scsi: ufs: add Hisilicon ufs driver code Li Wei
2018-02-08 13:19   ` Riku Voipio
2018-01-06  9:51 ` Li Wei [this message]
2018-01-11 20:34   ` [PATCH v7 2/5] dt-bindings: scsi: ufs: add document for hisi-ufs Rob Herring
2018-01-06  9:51 ` [PATCH v7 3/5] arm64: dts: add ufs dts node Li Wei
2018-01-06  9:51 ` [PATCH v7 4/5] arm64: defconfig: enable configs for Hisilicon ufs Li Wei
2018-01-06  9:51 ` [PATCH v7 5/5] arm64: defconfig: enable f2fs and squashfs Li Wei
2018-01-08  1:39 ` [PATCH v7 0/5] scsi: ufs: add ufs driver code for Hisilicon Hi3660 SoC zhangfei
2018-01-08  1:41   ` 答复: " liwei (CM)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180106095117.67907-3-liwei213@huawei.com \
    --to=liwei213@huawei.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox