From: chris.packham@alliedtelesis.co.nz (Chris Packham)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 3/8] ARM: aurora-l2: add defines for parity and ECC registers
Date: Fri, 12 Jan 2018 14:27:50 +1300 [thread overview]
Message-ID: <20180112012755.20495-4-chris.packham@alliedtelesis.co.nz> (raw)
In-Reply-To: <20180112012755.20495-1-chris.packham@alliedtelesis.co.nz>
From: Jan Luebbe <jlu@pengutronix.de>
These defines will be used by subsequent patches to add support for the
parity check and error correction functionality in the Aurora L2 cache
controller.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
[cp: use shorter names for some #defines]
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
arch/arm/include/asm/hardware/cache-aurora-l2.h | 48 +++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm/include/asm/hardware/cache-aurora-l2.h b/arch/arm/include/asm/hardware/cache-aurora-l2.h
index dc5c479ec4c3..39769ffa0051 100644
--- a/arch/arm/include/asm/hardware/cache-aurora-l2.h
+++ b/arch/arm/include/asm/hardware/cache-aurora-l2.h
@@ -31,6 +31,9 @@
#define AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU \
(3 << AURORA_ACR_REPLACEMENT_OFFSET)
+#define AURORA_ACR_PARITY_EN (1 << 21)
+#define AURORA_ACR_ECC_EN (1 << 20)
+
#define AURORA_ACR_FORCE_WRITE_POLICY_OFFSET 0
#define AURORA_ACR_FORCE_WRITE_POLICY_MASK \
(0x3 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
@@ -41,6 +44,51 @@
#define AURORA_ACR_FORCE_WRITE_THRO_POLICY \
(2 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
+#define AURORA_ERR_CNT_REG 0x600
+#define AURORA_ERR_ATTR_CAP_REG 0x608
+#define AURORA_ERR_ADDR_CAP_REG 0x60c
+#define AURORA_ERR_WAY_CAP_REG 0x610
+#define AURORA_ERR_INJECT_CTL_REG 0x614
+#define AURORA_ERR_INJECT_MASK_REG 0x618
+
+#define AURORA_ERR_CNT_CLR_OFFSET 31
+#define AURORA_ERR_CNT_CLR \
+ (0x1 << AURORA_ERR_CNT_CLR_OFFSET)
+#define AURORA_ERR_CNT_UE_OFFSET 16
+#define AURORA_ERR_CNT_UE_MASK \
+ (0x7fff << AURORA_ERR_CNT_UE_OFFSET)
+#define AURORA_ERR_CNT_CE_OFFSET 0
+#define AURORA_ERR_CNT_CE_MASK \
+ (0xffff << AURORA_ERR_CNT_CE_OFFSET)
+
+#define AURORA_ERR_ATTR_SRC_OFF 16
+#define AURORA_ERR_ATTR_SRC_MSK \
+ (0x7 << AURORA_ERR_ATTR_SRC_OFF)
+#define AURORA_ERR_ATTR_TXN_OFF 12
+#define AURORA_ERR_ATTR_TXN_MSK \
+ (0xf << AURORA_ERR_ATTR_TXN_OFF)
+#define AURORA_ERR_ATTR_ERR_OFF 8
+#define AURORA_ERR_ATTR_ERR_MSK \
+ (0x3 << AURORA_ERR_ATTR_ERR_OFF)
+#define AURORA_ERR_ATTR_CAP_VALID_OFF 0
+#define AURORA_ERR_ATTR_CAP_VALID \
+ (0x1 << AURORA_ERR_ATTR_CAP_VALID_OFF)
+
+#define AURORA_ERR_ADDR_CAP_ADDR_MASK 0xffffffe0
+
+#define AURORA_ERR_WAY_IDX_OFF 8
+#define AURORA_ERR_WAY_IDX_MSK \
+ (0xfff << AURORA_ERR_WAY_IDX_OFF)
+#define AURORA_ERR_WAY_CAP_WAY_OFFSET 1
+#define AURORA_ERR_WAY_CAP_WAY_MASK \
+ (0xf << AURORA_ERR_WAY_CAP_WAY_OFFSET)
+
+#define AURORA_ERR_INJECT_CTL_ADDR_MASK 0xfffffff0
+#define AURORA_ERR_ATTR_TXN_OFF 12
+#define AURORA_ERR_INJECT_CTL_EN_MASK 0x3
+#define AURORA_ERR_INJECT_CTL_EN_PARITY 0x2
+#define AURORA_ERR_INJECT_CTL_EN_ECC 0x1
+
#define AURORA_MAX_RANGE_SIZE 1024
#define AURORA_WAY_SIZE_SHIFT 2
--
2.15.1
next prev parent reply other threads:[~2018-01-12 1:27 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20180112012755.20495-1-chris.packham@alliedtelesis.co.nz>
2018-01-12 1:27 ` [PATCH v4 1/8] ARM: l2c: move cache-aurora-l2.h to asm/hardware Chris Packham
2018-01-12 1:27 ` [PATCH v4 2/8] ARM: aurora-l2: add prefix to MAX_RANGE_SIZE Chris Packham
2018-01-12 1:27 ` Chris Packham [this message]
2018-01-12 1:27 ` [PATCH v4 4/8] ARM: l2x0: support parity-enable/disable on aurora Chris Packham
2018-01-12 1:27 ` [PATCH v4 5/8] ARM: l2x0: add marvell,ecc-enable property for aurora Chris Packham
2018-01-19 21:28 ` Rob Herring
[not found] ` <1525338355.17782.21.camel@pengutronix.de>
2018-05-03 20:54 ` [PATCH v4 0/8] EDAC drivers for Armada XP L2 and DDR Chris Packham
2018-10-09 7:06 ` Uwe Kleine-König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180112012755.20495-4-chris.packham@alliedtelesis.co.nz \
--to=chris.packham@alliedtelesis.co.nz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox