From mboxrd@z Thu Jan  1 00:00:00 1970
From: miquel.raynal@free-electrons.com (Miquel Raynal)
Date: Fri, 12 Jan 2018 19:21:42 +0100
Subject: [PATCH v3 0/7] Marvell NAND controller rework with ->exec_op()
In-Reply-To: <20180111222833.GA15584@1wt.eu>
References: <20180109103637.23798-1-miquel.raynal@free-electrons.com>
 <20180111222833.GA15584@1wt.eu>
Message-ID: <20180112192142.6541edf4@xps13>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hello Willy,

On Thu, 11 Jan 2018 23:28:33 +0100
Willy Tarreau <w@1wt.eu> wrote:

> Hi Miquel,
> 
> On Tue, Jan 09, 2018 at 11:36:30AM +0100, Miquel Raynal wrote:
> > These changes have been tested on:
> >    - PXA3xx platform with a CM-X300 board (2kiB page NAND, 1b/512B
> >      strength, Hamming ECC engine) [32 bits]
> >    - Armada 385 DB AP (4kiB page NAND, 4b/512B, BCH ECC engine) [32
> > bits]
> >    - Armada 398 DB (4kiB page NAND, 8b/512B, BCH ECC engine using a
> > layout with a last chunk different than the others) [32 bits]
> >    - Armada 7040 DB and Armada 8040 DB (4kiB page NAND, 4b/512B,
> > BCH ECC engine) [64 bits]
> >    - Triax dvb-tc board (2kiB page NAND, 4b/512B, BCH ECC engine)
> > [32 bits]  
> 
> If you're interested, I have a mirabox with an armada 370 which uses
> the same driver. I've not powered it up for a while but if that can
> be useful I can try to find some time for this.

Thank you very much for the proposal!

For the moment I don't think there is a need as this type of platform
has already been tested, but I keep it in mind.

Thanks again!
Miqu?l